Kamarulzaman Mat

Kamarulzaman Mat

Auto-generated profile, based on publicly available information

Kamarulzaman Mat

Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 July 2020 in IEEE Access
Verified
Journal Article
Open access
Saif HannanSaif Hannan
Saif Hannan
MIMohammad Tariqul Islam
Mohammad Tariqul Islam
NSNorsuzlin Mohd Sahar
Norsuzlin Mohd Sahar
KMKamarulzaman Mat
Kamarulzaman Mat
Muhammad E. H. ChowdhuryMuhammad E. H. Chowdhury
Muhammad E. H. Chowdhury
HRHatem Rmili
Hatem Rmili
A novel modified-segmented split-ring based symmetric metamaterial absorber is introduced in this paper for X, Ku, and K band applications. The perfect absorption was achieved with a total of 1.91 GHz absorption bandwidth using the conventional FR4 substrate without resistive lumped elements. EM waves were applied in TEM mode at both normal and oblique incidence up to 90° and the same absorptance was found at 11.23 GHz, 14.18 GHz, 17.37 GHz, and 19.18 GHz with the maximum of 85.51%, 99.13%, 98.19%, and 90.8% absorptance respectively. This absorption performance was proved for both co- and cross-polarization analysis. Double negative values of permittivity and permeability up to 17.37 GHz and single negative values of either permittivity or permeability at 19.18 GHz were achieved. An equivalent circuit analysis also proved its performance capability, which makes it a perfect metamaterial absorber. Finally, the comparison of the design with recently published works in terms of unit cell size, absorption band, maximum polarization angles, and cross-polarized absorptivity proved it as a better candidate for the potential use as a perfect absorber.

21 February 2023 in Biosensors
Verified
Journal Article
Open access
PDF file
AHAmran Hossain
Amran Hossain
MIMohammad Tariqul Islam
Mohammad Tariqul Islam
Tawsifur RahmanTawsifur Rahman
Tawsifur Rahman
Muhammad E. H. ChowdhuryMuhammad E. H. Chowdhury
Muhammad E. H. Chowdhury
ATAnas Tahir
Anas Tahir
MSMohamed S. Soliman
Mohamed S. Soliman
Automated brain tumor segmentation from reconstructed microwave (RMW) brain images and image classification is essential for the investigation and monitoring of the progression of brain disease. The manual detection, classification, and segmentation of tumors are extremely time-consuming but crucial tasks due to the tumor’s pattern. In this paper, we propose a new lightweight segmentation model called MicrowaveSegNet (MSegNet), which segments the brain tumor, and a new classifier called the BrainImageNet (BINet) model to classify the RMW images. Initially, three hundred (300) RMW brain image samples were obtained from our sensors-based microwave brain imaging (SMBI) system to create an original dataset. Then, image preprocessing and augmentation techniques were applied to make 6000 training images per fold for a 5-fold cross-validation. Later, the MSegNet and BINet were compared to state-of-the-art segmentation and classification models to verify their performance. The MSegNet has achieved an Intersection-over-Union (IoU) and Dice score of 86.92% and 93.10%, respectively, for tumor segmentation. The BINet has achieved an accuracy, precision, recall, F1-score, and specificity of 89.33%, 88.74%, 88.67%, 88.61%, and 94.33%, respectively, for three-class classification using raw RMW images, whereas it achieved 98.33%, 98.35%, 98.33%, 98.33%, and 99.17%, respectively, for segmented RMW images. Therefore, the proposed cascaded model can be used in the SMBI system.

5 September 2018 in Sensors
Verified
Journal Article
Open access
PDF file
MIMohammad Tariqul Islam
Mohammad Tariqul Islam
FAFarhad Bin Ashraf
Farhad Bin Ashraf
TATouhidul Alam
Touhidul Alam
NMNORBAHIAH BINTI MISRAN
NORBAHIAH BINTI MISRAN
KMKamarulzaman Bin Mat
Kamarulzaman Bin Mat
A compact ultrawideband (UWB) antenna based on a hexagonal split-ring resonator (HSRR) is presented in this paper for sensing the pH factor. The modified HSRR is a new concept regarding the conventional square split-ring resonator (SSRR). Two HSRRs are interconnected with a strip line and a split in one HSRR is introduced to increase the electrical length and coupling effect. The presented UWB antenna consists of three unit cells on top of the radiating patch element. This combination of UWB antenna and HSRR gives double-negative characteristics which increase the sensitivity of the UWB antenna for the pH sensor. The proposed ultrawideband antenna metamaterial sensor was designed and fabricated on FR-4 substrate. The electrical length of the proposed metamaterial antenna sensor is 0.238 × 0.194 × 0.016 λ, where λ is the lowest frequency of 3 GHz. The fractional bandwidth and bandwidth dimension ratio were achieved with the metamaterial-inspired antenna as 146.91% and 3183.05, respectively. The operating frequency of this antenna sensor covers the bandwidth of 17 GHz, starting from 3 to 20 GHz with a realized gain of 3.88 dB. The proposed HSRR-based ultrawideband antenna sensor is found to reach high gain and bandwidth while maintaining the smallest electrical size, a highly desired property for pH-sensing applications.

8 November 2017 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Md. Zulfiker MahmudMd. Zulfiker Mahmud
Md. Zulfiker Mahmud
TATouhidul Alam
Touhidul Alam
NMNORBAHIAH BINTI MISRAN
NORBAHIAH BINTI MISRAN
MSMandeep Singh Jit Singh
Mandeep Singh Jit Singh
KMKamarulzaman Mat
Kamarulzaman Mat
A new, compact planar wideband negative index metamaterial based on a modified split ring resonator (SRR) is studied to enhance performance of ultrawideband antenna. A compact, metamaterial (MTM)-inspired microstrip antenna is presented for microwave imaging system (MIS) application. Two layers of left-handed metamaterial array (2 × 4) of the unit cell are placed on the radiating patch and the ground plane, respectively. Each left-handed metamaterial (LHM) unit cell was constructed by modifying a square split ring resonator (SRR), resulting in negative permeability and permittivity with a stable negative refractive index. The results shows that it has a significant impact on the performance of conventional patch antenna in terms of transmission co-efficient, efficiency and low loss. Compared to antenna without LHM, it is shown that the bandwidth is significantly broadened up to a few megahertz and becomes more convergent leading to the achievement of desired properties for ultra-wideband (UWB) applications leading to microwave imaging. The proposed MTM antenna structure is fabricated on commercially-available, flame-retardant material of size 26 × 22 × 1.6 mm3 with 4.6 dielectric constants, due to its low cost and convenience for making multilayer printed circuit boards (PCBs). The antenna achieves 3.1 GHz to 10.71 GHz of impedance bandwidth (−10 dB), which covers the full UWB band. The use of double-layer negative index MTM unit cells enhances UWB performance, and the improved radiation efficiency, nearly directional radiation pattern, acceptable gain, stable surface current and negative refractive index make this MTM antenna a suitable candidate for UWB applications.

1 March 2020 in Sensors
Verified
Journal Article
Open access
PDF file
AHAmran Hossain
Amran Hossain
MIMohammad Tariqul Islam
Mohammad Tariqul Islam
Ali F. AlmutairiAli F. Almutairi
Ali F. Almutairi
MSMandeep Singh Jit Singh
Mandeep Singh Jit Singh
KMKamarulzaman Mat
Kamarulzaman Mat
MSMd Samsuzzaman Sobuz
Md Samsuzzaman Sobuz
An Ultrawideband (UWB) octagonal ring-shaped parasitic resonator-based patch antenna for microwave imaging applications is presented in this study, which is constructed with a diamond-shaped radiating patch, three octagonal, rectangular slotted ring-shaped parasitic resonator elements, and partial slotting ground plane. The main goals of uses of parasitic ring-shaped elements are improving antenna performance. In the prototype, various kinds of slots on the ground plane were investigated, and especially rectangular slots and irregular zigzag slots are applied to enhance bandwidth, gain, efficiency, and radiation directivity. The optimized size of the antenna is 29 × 24 × 1.5 mm3 by using the FR-4 substrate. The overall results illustrate that the antenna has a bandwidth of 8.7 GHz (2.80–11.50 GHz) for the reflection coefficient S11 < −10 dB with directional radiation pattern. The maximum gain of the proposed prototype is more than 5.7 dBi, and the average efficiency over the radiating bandwidth is 75%. Different design modifications are performed to attain the most favorable outcome of the proposed antenna. However, the prototype of the proposed antenna is designed and simulated in the 3D simulator CST Microwave Studio 2018 and then effectively fabricated and measured. The investigation throughout the study of the numerical as well as experimental data explicit that the proposed antenna is appropriate for the Ultrawideband-based microwave-imaging fields.

23 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
AMAhmad Musa
Ahmad Musa
MHMohammad Lutful Hakim
Mohammad Lutful Hakim
TATouhidul Alam
Touhidul Alam
MIMohammad Tariqul Islam
Mohammad Tariqul Islam
AAAhmed S Alshammari
Ahmed S Alshammari
MIMd. Shabiul Islam
Md. Shabiul Islam
The visible and infrared wavelengths are the most frequently used electromagnetic (EM) waves in the frequency spectrum; able to penetrate the atmosphere and reach Earth’s surface. These wavelengths have attracted much attention in solar energy harvesting; thermography; and infrared imaging applications for the detection of electrical failures; faults; or thermal leakage hot spots and inspection of tapped live energized components. This paper presents a numerical analysis of a compact cubic cross-shaped four-layer metamaterial absorber (MA) structure by using a simple metal-dielectric-metal-dielectric configuration for wideband visible and infrared applications. The proposed MA achieved above 80% absorption in both visible and near-infrared regions of the spectrum from 350 to 1250 nm wavelength with an overall unit cell size of 0.57λ × 0.57λ × 0.59λ. The SiO2 based anti-reflection coating of sandwiched tungsten facilitates to achieve the wide high absorption bandwidth. The perceptible novelty of the proposed metamaterial is to achieve an average absorptivity of 95.3% for both visible and infrared wavelengths with a maximum absorptivity of 98% from 400 nm to 900 nm. Furthermore, the proposed structure provides polarization insensitivity with a higher oblique incidence angle tolerance up to 45°.