The influence of different growth conditions on the In distribution in ultrathin InGaN insertions in a GaN matrix is investigated by high-resolution transmission electron microscopy and an appropriate image evaluation technique. It is demonstrated that the indium distribution represents dense arrays of In-rich nanodomains inserted in a layer with a lower indium concentration. The sizes of the In-rich regions are about 4–5 nm at a growth temperature of 720 °C. Increasing the growth temperature leads to a strong decrease in the of nanoisland density and, also, a moderate decrease in their lateral size. Increasing the trimethylindium/trimethylgallium ratio strongly increases the density of the islands, but the lateral size remains weakly effected. The observations are in agreement with a thermodynamic model of island formation including entropy effects.
Transmission electron microscopy studies of low indium composition insertions (x<0.4) in a GaAs matrix deposited by molecular beam epitaxy or by metal-organic chemical vapor deposition reveal nanoscale quasiperiodic compositional and morphological modulations. The luminescence peak wavelength is found to be a strong function of deposition parameters and can be tuned from 1.1 to 1.3 μm for the same x and average thickness of the deposit. Strained (In, Ga, Al)As lasers with such a laterally modulated active region demonstrate significant depolarization of the electroluminescence. For short cavity length, lasing occurs at energies corresponding to transitions between conduction band and light holelike valence band states. Devices lase at low threshold current densities and demonstrate continuous wave operation up to 3 W at room temperature.
We report surface-mode lasing in a structure with 12-fold stacked InGaN insertions in a GaN matrix without using of Bragg mirrors. At high excitation densities, one of the modes of the Fabry–Perot cavity formed by the GaN sapphire and the GaN air interfaces, shows a strong superlinear increase in intensity with excitation density rise. The possibility to reach surface lasing in a very low finesse microcavity is due to the ultrahigh material gain of the InGaN insertions. The strong modulation of the absorption-gain spectrum with increase in the excitation density results in a pronounced energy shift of the cavity modes. We found that the threshold excitation density is weakly affected by temperature up to 110 K, while increases at higher temperatures. This behavior is attributed to thermal evaporation of carriers from InN-rich nanodomains and is typical for quantum dot lasers.
30 March 2007 in Semiconductor Science and Technology