We have designed and fabricated a kind of supersymmetric slotted Fabry–Perot semiconductor laser near 1550 nm to achieve a single-mode, high-power, and narrow-linewidth operation. The structure of the laser is composed of an electrically pumped broad ridge waveguide in the middle to provide optical gain, a group of periodic slots etched near the front facet to suppress the extra longitudinal modes and achieve a narrow linewidth, and a pair of passive superpartner waveguides located on both sides to filter out the high-order lateral modes in the broad waveguide. The device measured under the temperature of 25 °C shows an output power of 113 mW, a single-lobe lateral far-field distribution with the full width at half maximum of 7.8°, a peak wavelength of 1559.7 nm with the side-mode suppression ratio of 48.5 dB, and an intrinsic linewidth of 230 kHz at the bias current of 800 mA. The device is a promising candidate for cost-effective light sources for coherent communication systems and LiDARs.
27 October 2022 in IEEE Photonics Technology Letters
A unstable cavity structure composed of the arc-shaped cavity, Fabry-Perot cavity, and sidewall saw-tooth microstructure is proposed to achieve mode selection in high-power broad-area diode laser with 980nm wavelength. In this cavity, the loss difference between the higher-order modes and the fundamental mode is increased to suppress the lasing of higher-order modes. The lateral divergence is reduced by about 28%. The number of modes in the near-field spot is reduced and the light intensity is concentrated towards the center of the Near-field profile. Also, the lateral beam parameter product decreases by 15%.
Electrically injected Parity-time (PT)-symmetric double ridge semiconductor laser lasing at 980 nm range is fabricated. The side mode suppression ratio (SMSR) of the spectrum of the laser is 37.97 dB at current of 91 mA.