20 May 2024 in Advances in Polymer Technology
The oil bitumen BND 90/130, produced at the “LLP SP Caspi Bitum” with the modifier, which consists of copolymer of ethylene with butyl acrylate and glycidyl methacrylate taken in an amount of 0.5–1.6 wt%, and the tire reclaim (4–20 wt%), which is the destructate of mesh elastomers of different chemical nature, was modified; possibility of using the developed bitumen-elastomer binders in road asphalt concrete was justified. Modification of bitumen with a copolymer of ethylene with butyl acrylate and glycidyl methacrylate leads to an improvement in the properties of road bitumen: the softening point, hardness, deformability at low temperatures, elasticity, and adhesion to metal and mineral filler increase. It was shown that ethylene with butyl acrylate and glycidyl methacrylate chemically interacts with the functional groups of bitumen asphaltenes through the epoxy group of glycidyl methacrylate. Analysis of the spectra and group composition indicates an increased content of high molecular weight asphaltenes in the modified bitumen with a slight increase in structuring resins. It has been established that bitumen modified with rubber crumbs of 0.6–1.0 mm in size has high elasticity. The most effective composition of a bitumen-regenerated composite material based on tire reclaim has been determined. In terms of the totality of physicochemical and operational characteristics and comparative cost, the most acceptable is the bitumen-regenerated composition (with a regenerate content of 20%) and is superior in the complex of properties to bitumen modified with an optimal content of ethylene with butyl acrylate and glycidyl methacrylate (1.6%). The technology for modifying bitumen with tire reclaim is less time-consuming, more economically profitable, and environmentally effective, since it utilizes large-tonnage waste of worn-out tires. The resulting bitumen-polymer compositions have a high positive set of properties: softening point, hardness, elasticity, frost resistance, and low-temperature characteristics.
4 March 2023 in Advances in Polymer Technology
Recovery of fat-and-oil production wastes will reduce the technogenic impact on the environment, as well as involve them in a new production cycle as a secondary material resource. As part of solving this problem, the possibilities of using fat-and-oil production wastes in the production of a tyre reclaim and a modified tyre reclaim are considered. In the course of the studies, the fat-and-oil industry wastes sorption characteristics are determined, and in relation to oils in static and dynamic conditions, the spent reagent reclamation ways are determined. The authors obtained a tyre reclaim and a modified tyre reclaim using the fat-and-oil industry wastes (soap stock, diatomite, bleaching clay, and fatty acids isolated from soap stock). In this work, the authors studied the possibility of using the fat-and-oil industry wastes in the formulations of a tyre reclaim and a modified tyre reclaim. Extended physical and mechanical tests of experimental rubbers led to the conclusion that it is most expedient to use the fat-and-oil industry wastes in the formulation of rubber compounds for production of sleeper pads for railroad tracks, since when using a tyre reclaim and a modified tyre reclaim, the indicators of rubber properties practically do not change and comply with control standards.
15 August 2019 in Series of Geology and Technical Sciences
15 December 2018 in SERIES CHEMISTRY AND TECHNOLOGY
30 September 2025 in Вестник КазУТБ
Бұл мақалада ұңғыманың түп аймағын өңдеу тиімділігін арттырудағы жаңа әдіс әзірленген, жылутасығышты ұңғыманың түп аймағына енгізу арқылы, оның құрамының еру қабілетін, өндіруші ұңғымалардың түп аймағы бөлігін өңдеу кезінде ерімейтін шөгінділердің еру жылдамдығы мен көлемін, соныменқатар, қабатқа терең енуді арттыру болып табылады. Бұл композиция қабаттардың мұнаймен қаныққан кеуектеріне енген кезде, скипидар жақсы еріткіш ретінде мұнай-қышқыл эмульсияларының тұрақтылығын айтарлықтай төмендетеді және және ұңғыманың түп аймағындағы калий бихроматының сулы ерітіндісінің скипидармен кейінгі реакциясы күшейеді және реакцияның қабаттан тыс жерде ығысуымен байланысты құрамның қабаттан шығуына қарай жалғасады. Қолданылатын композиция ароматты көмірсутектермен, сондай-ақ парафиндермен әрекеттеседі. Реакциялар нәтижесінде әр түрлі қышқылды күрделі эфирлер алынады, олар фазааралық керілуді төмендетеді, ингибиторлық әсерді арттырады, тау жынысы ұңғымасының кеуектеріндегі ауыр мұнай компоненттерінің шөгінділерін ерітеді және ұңғы түбінің және қабаттың шалғай аймағының өткізгіштігін қалпына келтіреді, нәтижесінде қабаттан ұңғымаға мұнай ағыны жақсарады.
1 January 2023 in Международный студенческий научный вестник (International Student Scientific Herald)