This paper introduces a fully integrated switched-capacitor (SC) DC-DC boost converter suitable for energy harvesting in miniature sensor systems with varying harvesting source and battery voltages. Unlike the conventional SC DC-DC boost converters, where efficiency is optimized only for a few topology-dependent voltage conversion ratios (VCRs), the proposed soft-charging-based SC converter achieved VCR-insensitive evenly high efficiency for a wide range of input and output voltages. A test chip was fabricated in 180nm process, and the measured peak efficiency and average efficiency are 85.3% and 83.6%, respectively, for 1.8V regulated output voltage and a wide range of input voltages (0.95-1.8 V). Also, a peak efficiency of 88.9% and average efficiency of 87.6% are achieved for a wide range of battery output voltages (3.0-4.2 V) and a 1.2V harvesting source input voltage.
9 January 2023 in IEEE Transactions on Industrial Electronics
This letter proposes an ultralow power single-inductor multiple-output converter for an implantable stimulation system. This converter minimizes the number of switches turning on and off to deliver power to outputs of 0.8, 1.8, and 20 V, and it uses a soft-switching technique for all switching nodes. It also operates with a self-oscillating controller only when outputs require power. As a result, it has a peak efficiency of 92.3% when the converter generates the outputs of 0.8 and 1.8 V, of which load currents are 2 and 0.5 mA, respectively, from a battery voltage of 3 V. The converter consumes a quiescent power of less than 3.0 μ W.
18 October 2021 in IEEE Solid-State Circuits Letters
This letter presents a single-inductor multiple-output (SIMO) step-up/down DC-DC converter for an implantable electro-ceutical system-on-chip (SoC), which generates the supply voltages of 0.8 V, 1.8 V, and 12 V from a battery (3 -4.2 V). To extend the battery life-time during a long standby period, the load-adaptive frequency-scaling (LAFS) without an active load sensor is proposed, effectively reducing the quiescent current under light loads at no expense of tran-sient response performance. Also, this paper introduces a new design of a low-power adaptive on-time (AOT) generator to achieve a consist-ently low output ripple regardless of battery voltage variation. The proposed chip fabricated in 0.18-mum BCD consumes a quiescent cur-rent of only 217 nA and offers the output recovery time of ≤ 1 ms at a zero-to-full load transition. The measured efficiency was 86% with a load of 500 muA and 55% even with an ultra-light load of 1 muA.
23 September 2024 in IEEE Solid-State Circuits Letters
This work presents an analog in-memory computing (IMC) macro utilizing 14nm MRAM technology. To facilitate energy-efficient high-throughput multiply-accumulate (MAC) operations, a multi-bit weight is introduced using stacked MTJ architecture and an analog bit-parallel MAC (ABP-MAC) scheme is proposed. This approach delivers 3.3 times better TOPS/mm2 than the state-of-the-art MRAM-based IMC macro. Additionally, a comprehensive calibration technique significantly improves computational accuracy across 72 IMC macros. The proposed IMC macro achieves 18.29 TOPS/mm2 and 340.8 TOPS/W with 1-bit normalization and classification accuracy of 90.2% with the Google Speech Commands dataset.
22 January 2025 in IEEE Solid-State Circuits Letters
Two specialized digital SRAM in-memory computing (IMC) macros were implemented using a 5nm process: (1) a high-efficiency (HE) macro, and (2) a high-density (HD) macro. The HE macro achieves an energy efficiency of 274 TOPS/W under 90% input bit sparsity, 50% weight bit sparsity, and 0.46V supply voltage, by adopting a compact Wallace tree adder and a tri-state buffer optimized for pipelined operation. The HD macro achieves a state-of-the-art memory density performance of 5.67 Mb/mm2 by employing a multiply-cell consisting of a single transistor. Extensive sample measurements have confirmed the robust and reliable performance of the two digital IMC macros. The proposed HE and HD macro have demonstrated their significant potential as key building blocks for next-generation AI accelerators.