This paper proposes a multi-excitation brushless generator (MEG) using parallel magnetic circuits for DC power system with enhanced output power capability. The multi-excitation sources include the permanent magnets, DC excitation, and AC excitation. The key is that an appropriate AC excitation field is constructed and combined with the PM and DC excitation fields, thus realizing field enhancement, armature reaction compensation, and output power improvement. Additionally, the AC excitation power is extracted from the permanent magnet field of the MEG by utilizing the decoupled parallel magnetic circuits, realizing self AC excitation. The DC excitation winding and the diode rectifier are retained, ensuring good generator system reliability. In this paper, the operation mechanism of the proposed multi-excitation scheme is deduced and revealed. To evaluate the power enhancement of the proposed method, the MEG is compared with an existing dual-excitation generator. At last, experiment results verify the proposed method.
2 October 2023 in IEEE Transactions on Power Electronics
In this paper, a multi-gain online autotuning technique-based discrete-time current regulator for permanent magnet synchronous motors is proposed. With the nominal current regulator in the proposed control scheme, the performance and robustness of the current control system are improved. Then a multi-gain online autotuning method is proposed to further suppress the adverse effects of parametric uncertainties. In the proposed approach, the voltage vectors of the current regulator are mapped to an extended synchronous reference frame, based on which an adaptive observer is constructed without approximation to autotune the gains of the current regulator online. Compared with traditional recursive-least-square methods, the proposed autotuning method can be implemented with greatly reduced computational burden. The proposed current control method is designed directly in the discrete-time domain, which guarantees the control performance in digital implementations. Additionally, the proposed current control method can be applied to both interior and surface-mounted permanent magnet synchronous motors. Finally, theoretical analysis and comparative experiments verify the effectiveness of the proposed method.
A multimodal elastic actuator based on the brake and clutch device of worm gear is designed for efficient legged robot locomotion. Several modes of operation can be outputted with the engaging and disengaging of the brake module, including motor drive, series elastic actuation, the energy storage and release. The simulation and performance experiments are applied for the multimodal actuator. The results that the output bandwidth of the system increases gradually with the increase of spring coefficient, and the knee robot leg based on multimodal elastic actuator can realize switchable mode during walking cycle.