5 July 2021 in Archives of Metallurgy and Materials
1 July 2019 in Materiale Plastice
Thermoplastic polymers have found widespread applicability in electronic industry owing to their facile processing and relatively low costs. Transparent polymer foils, like polyethylene terephthalate (PET), can be utilized in manufacturing components for liquid crystal display (LCD) devices. This work is focused on surface processing of PET through different procedures. The induced surface modifications of polymer samples were analyzed by optical microscopy. Contact angles of nematic drops on PET film are measured to evaluate how the method of surface modification reveals that the surface texturing affects the interactions of polymer with the liquid crystal. The influence of created surface anisotropy on the work of adhesion at polymer/liquid crystal interface is analyzed. Preliminary assessment of nematic orientation on the surface of modified PET foils is performed using polarized light. The results were discussed in regard with the used methodology to adapt the surface of the PET films to achieve optimal orientation of nematic molecules. The obtained data will open new perspectives on processing polymer foils as alignment layers used in LCD devices.
23 September 2023 in Polymers for Advanced Technologies
11 March 2026 in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
The paper presents the development of an instructional test bench designed to support the training of marine cadets in the operation and maintenance of tugboat propulsion systems powered by diesel engines. The test bench, developed by the authors and implemented at the Naval Academy “Mircea cel Bătrân” in Constant,a, Romania, is intended to enhance practical understanding of propulsion system components and operating principles. The installation enables instruction on the construction and operation of four-stroke internal combustion engines, as well as on the correct monitoring of key parameters associated with a marine diesel engine, reversing gearbox, and hydraulic brake. Successive loading of the engine can be performed, allowing the analysis of engine behavior and power development under controlled operating conditions. The test bench comprises a diesel engine, reversing gearbox, axial shaft, and a downsized hydraulic brake coupled through a multiplier gearbox for emulating the propeller load. A custom-designed automation and control system is implemented, providing local and remote command consoles together with a replicating display for parameter monitoring. Auxiliary systems include compressed air supply, fuel storage and delivery, exhaust gas evacuation, cooling, and lubrication systems for both the engine and the brake.