25 December 2023 in IEEE Transactions on Applied Superconductivity
R&D of high field accelerator magnets is ongoing at the Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS) for pre-study of the next-generation high energy colliders like Super Proton-Proton Collider (SPPC), Future Circular Collider (FCC) and etc. A 12.47-T main field at 4.2 K has been attained in 2021 within two 14-mm apertures of LPF1-U, a superconducting model dipole magnet with Nb 3 Sn & NbTi combined common-coil configuration. Based on the experiences mastered in the LPF1 series magnets, a 16-T high field dipole magnet named LPF3 has been designed, fabricated and is in the performance test process. LPF3 is also a combined magnet with six racetrack Nb 3 Sn coils outside, expected to provide a 13-T main field within two 50-mm apertures, and with inserted HTS coils to enhance the field up to 16 T or even higher. The 13-T Nb 3 Sn dipole magnet, named LPF3-LTS, incorporates a graded common-coil configuration to enhance superconductor efficiency. The optimization of coil layouts includes varying bending radii (BR) and lengths of straight sections (LSS) to mitigate field accumulation in the outer four coils near the central posts and coil ends, respectively. Several Rutherford cables over 200 meters were fabricated for the coils winding, and with the maximum strands count of 42. The support structure for LPF3-LTS has adopted a shell-based design, with an improved “Bladder & Key” technology. Dedicated hydraulic pistons were investigated and utilized to replace the traditional bladders. The main design characteristics, fabrication process and some preliminary test results of the magnet are presented in this paper.
10 January 2024 in IEEE Transactions on Applied Superconductivity
Nb 3 Sn is now recognized as the practical material for the high-field applications from 10 to 16 T, for particle accelerators, fusion and other related fields. However, the obtaining of high J c in Nb 3 Sn presently contradicts one of the most important stability criteria: to keep a small filament size, which makes the stability issue particularly prominent. Large filament sizes frequently cause flux jumps in the conductor, making quench detection and protection more challenging for Nb 3 Sn magnets. In this work, we try to numerically simulate the flux jumps more accurately down to a filamentary scale. Based on the theory of superconducting dynamics, we have established a theoretical model to describe the magnetothermal instability of Nb 3 Sn wires by considering the superconductor flux dynamics, heat diffusion and temperature response. The preliminary analysis of the test results for LPF3 which is a 16-T hybrid common coil dipole magnet fabricated by Institute of High Energy Physics is conducted to study the causes of its quenching and the impact of flux jumps on the magnet.
6 February 2024 in IEEE Transactions on Applied Superconductivity
The Institute of High Energy Physics, Chinese Academy of Sciences (IEHP, CAS) proposed a compact ReBCO cable (named X-cable) which is implemented by in-plane bending ReBCO tapes to realize the transposition, and successfully fabricated a 10 m length prototype cable. The study on the mechanical properties of the cable is of great significance to its engineering application. Based on the finite element model, the stress-strain state of cable under different loads has been analyzed, which are used to predict the critical current performance of superconducting tapes in cable. This paper focuses on the possible failure mechanism of the X-cable under bending and transverse loads. Based on the established model, the critical bending radius of the x-cable is determined to be 20 mm. We analyzed the critical pressure and shear stress of the cable under lateral load, considering two possible scenarios that may occur during the manufacturing process. The above results can serve as a valuable reference for subsequent design of magnets and winding of coils.