On the basis of the successful development of a high field dipole magnet named LPF1-U, which reached a peak field of 12.47 T in 2021, the new magnet LPF3 with an expected field of over 13 T in the two 50-mm apertures has been designed and fabricated at IHEP. The magnet is developed in a common-coil configuration with six flat racetrack Nb 3 Sn coils, as well as High Temperature Superconducting (HTS) insert coils in the center to further enhance the field to 16 T or more. The Nb 3 Sn coils are designed to provide a 13 T main field at the operating current of 7580 A. The quench protection of the Nb 3 Sn coils is significantly important and challenging because of the much larger magnet apertures (50 mm) and stored energy (2155 kJ). Finally, the method of CLIQ (coupling-loss induced quench protection system) together with varistor is adopted to accelerate the propagation of quench in the magnet and control the hotspot temperature. This article describes the design of the optimized quench protection scheme, the model and the simulation results. The experiment test results are also analyzed and discussed in this article.
25 December 2023 in IEEE Transactions on Applied Superconductivity
R&D of high field accelerator magnets is ongoing at the Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS) for pre-study of the next-generation high energy colliders like Super Proton-Proton Collider (SPPC), Future Circular Collider (FCC) and etc. A 12.47-T main field at 4.2 K has been attained in 2021 within two 14-mm apertures of LPF1-U, a superconducting model dipole magnet with Nb 3 Sn & NbTi combined common-coil configuration. Based on the experiences mastered in the LPF1 series magnets, a 16-T high field dipole magnet named LPF3 has been designed, fabricated and is in the performance test process. LPF3 is also a combined magnet with six racetrack Nb 3 Sn coils outside, expected to provide a 13-T main field within two 50-mm apertures, and with inserted HTS coils to enhance the field up to 16 T or even higher. The 13-T Nb 3 Sn dipole magnet, named LPF3-LTS, incorporates a graded common-coil configuration to enhance superconductor efficiency. The optimization of coil layouts includes varying bending radii (BR) and lengths of straight sections (LSS) to mitigate field accumulation in the outer four coils near the central posts and coil ends, respectively. Several Rutherford cables over 200 meters were fabricated for the coils winding, and with the maximum strands count of 42. The support structure for LPF3-LTS has adopted a shell-based design, with an improved “Bladder & Key” technology. Dedicated hydraulic pistons were investigated and utilized to replace the traditional bladders. The main design characteristics, fabrication process and some preliminary test results of the magnet are presented in this paper.
18 December 2023 in IEEE Transactions on Applied Superconductivity
The Superconducting magnet group at Institute of High Energy Physics (IHEP, China) has been engaging in the development of the high field dipole superconducting magnet with common-coil configuration and shell-based structure. A superconducting magnet named LPF3 was proposed to realize a bore field of 16 T with Nb 3 Sn (13 T) and HTS (3 T). Six Nb 3 Sn coils and two kinds of HTS inserted coils have been assembled in August, 2023. LTS coils (LPF3-LTS) will be firstly trained to 13 T then HTS coils will be energized afterwards. Instead of Bladder & Key technology, LPF3 used the commercial hydraulics devices to apply the pre-load force in horizontal and vertical direction for the first time. Strain gauges and Fiber Bragg Grating (FBG) sensors were applied to monitor the pre-loading effect of the magnet. The main design parameters, stress analysis results, assembly procedure and strain measurement results will be presented.
10 January 2024 in IEEE Transactions on Applied Superconductivity
Nb 3 Sn is now recognized as the practical material for the high-field applications from 10 to 16 T, for particle accelerators, fusion and other related fields. However, the obtaining of high J c in Nb 3 Sn presently contradicts one of the most important stability criteria: to keep a small filament size, which makes the stability issue particularly prominent. Large filament sizes frequently cause flux jumps in the conductor, making quench detection and protection more challenging for Nb 3 Sn magnets. In this work, we try to numerically simulate the flux jumps more accurately down to a filamentary scale. Based on the theory of superconducting dynamics, we have established a theoretical model to describe the magnetothermal instability of Nb 3 Sn wires by considering the superconductor flux dynamics, heat diffusion and temperature response. The preliminary analysis of the test results for LPF3 which is a 16-T hybrid common coil dipole magnet fabricated by Institute of High Energy Physics is conducted to study the causes of its quenching and the impact of flux jumps on the magnet.
16 October 2023 in IEEE Transactions on Applied Superconductivity
Unlike low-temperature superconducting cables, there is so far no perfect solution for REBCO coated conductors to form a fully transposed high-current cable. Every REBCO cable concept must import a stack of tapes to achieve an operating current as high as tens of kiloamperes. The stacked REBCO tapes, no matter whether they are twisted or not, however, have a nature of non-transposing and therefore could result in current unbalance. In this manuscript, the current unbalance and the related electrical characteristics of a cable made of 40 stacked REBCO tapes are studied with an electrical circuit simulation. The differences in splice resistances and tape inductances that are both related to the non-transposed structure of a REBCO stack are considered. Results show that for a 40 cm long termination, a proper method to keep the contact resistivity between each tape and the copper termination around 10 nΩ·m is crucial to totally avoid current unbalance lowering the cable's performance. Surprisingly, the inter-tape current transfer is found to be able to further exacerbate local high current though it does make the overall distribution more balanced. The inductance difference induced current unbalance is only important if local defects exist at long REBCO tapes, which on the other hand can be cured by good inter-tape current transfer. For a fast-charging rate of 1 kA/s, the inter-tape contact resistivity should also be low to a level of 10 nΩ·m to ensure a short current transfer length of around 1 m.
26 January 2024 in IEEE Transactions on Applied Superconductivity
High-temperature superconductors (HTS) show strong advantage in high-energy accelerators applications due to their excellent current-carrying and mechanical properties at high fields. However, most HTS tapes like coated conductors are often strongly magnetized due to the high aspect ratio of filaments, which in turn causes the deterioration of magnetic field quality in high-field superconducting accelerators magnets. A subscale block-type dipole magnet has been designed and fabricated with ReBCO tapes to make it clear about the mechanics of Screening Current-Induced Magnetic Field (SCIF) and find effective methods to mitigate the effect. TA formulation is applied to calculate the degradation of the magnetic field quality caused by the SCIF and predict the critical current of the coil at liquid nitrogen. Then the overshooting and the shim coil are investigated to reduce the field distortion caused by the SCIF effect.