Sławomir Tarkowski

Sławomir Tarkowski

Auto-generated profile, based on publicly available information

Sławomir Tarkowski

Lublin University of Technology

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in Open Engineering
Verified
Journal Article
Open access
PDF file
Paweł DroździelPaweł Droździel
Paweł Droździel
STSławomir Tarkowski
Sławomir Tarkowski
IRIwona Rybicka
Iwona Rybicka
RWRafał Wrona
Rafał Wrona
The article presents the results of research on the total reaction time of drivers in real traffic conditions. The tested driver had to react to a complex signal by performing a braking manoeuvre. The measurements were based on the author’s method combining the measurements of reaction time during the actual driving with their computer analysis. The research group consisted of 15 drivers with different seniority of driving licences. The study measured the time of perception and the time of leg transfer from the accelerator pedal to the brake pedal. The results were subjected to analysis and on its basis conclusions were formulated.

2 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KDKazimierz Drozd
Kazimierz Drozd
STSławomir Tarkowski
Sławomir Tarkowski
Jacek CabanJacek Caban
Jacek Caban
ANAleksander Nieoczym
Aleksander Nieoczym
JVJán Vrábel
Ján Vrábel
ZKZbigniew Krzysiak
Zbigniew Krzysiak
There are many accidents in road traffic involving both heavy goods vehicles and passenger vehicles, and the interpretation of the causes of some accidents can be very difficult. The paper presents the results of an analysis of the road accident causes involving a truck and two passenger cars. The hypothesis was verified that the incident took place after the damage to the front wheel of the truck, which resulted in an uncontrolled change of the direction of its travel and leaving the lane in the opposite direction of the passenger cars. The damaged tire was inspected, and traces were described in the form of cracks on the side surface, irregular abrasion on the central part of the side surface and near the bead, as well as deformations resulting from damage to the cord. The thesis was made that the tire cracked as a result of its material structure defects. In order to verify it, bench tests were carried out on the deformation of the tire sidewall at various load conditions, which simulated driving with too little air pressure in the tire. Detailed studies of the fracture of the tire sidewall and the wires that make up its steel cord were carried out. Macroscopic examination of the cord wires on eight samples revealed the presence of corrosion changes that should not occur under normal operating conditions. The results of the research work indicate that tire rupture was caused by delamination of the material coatings and corrosion of the steel cord wires. These defects could have arisen due to the earlier cracking of the rubber layer and the ingress of moisture or as a result of the use of corroded steel cord wires in tire production. In the analyzed case, the driver could not regain control of the vehicle and avoid a collision with oncoming vehicles.

1 January 2021 in Open Engineering
Verified
Journal Article
Open access
PDF file
MMMaciej Mikulski
Maciej Mikulski
Paweł DroździelPaweł Droździel
Paweł Droździel
STSławomir Tarkowski
Sławomir Tarkowski
This article describes the impact of limiting human mobility related to the COVID-19 pandemic on the level of air pollution related to transport. The city of Krakow and the emission level of nitrogen oxides (NOx) were used as a case study. This article describes the air quality monitoring system in Krakow and the measurement results from the measurement station at Krasinskiego Avenue. The average values of the pollution level in April 2018–2020 were compared. For the selected range of data, a significance test was performed, which resulted in no grounds for rejecting the hypothesis of the equality of the mean levels of nitrogen oxides concentrations in the spring. The analysis takes into account the average monthly temperatures in the discussed years.

30 September 2019 in The Archives of Automotive Engineering - Archiwum Motoryzacji
Verified
Journal Article
Open access
Jacek CabanJacek Caban
Jacek Caban
ATAndrzej Turski
Andrzej Turski
ANAleksander Nieoczym
Aleksander Nieoczym
STSławomir Tarkowski
Sławomir Tarkowski
Borut JerebBorut Jereb
Borut Jereb
The article presents the research on the impact of specific factors on the state of the pressure value in passenger car wheels in service. Data on how the vehicle was used was obtained based on a survey. The survey contained data on checking the condition of the vehicle tires and also measured the tire pressure. The aim of the study was to investigate the relationship between the impact of specific factors on the state of the pressure value in passenger car wheels. The correlation analysis of the correctness of pressure in car tires and selected factors was carried out using the Kendall tau test. In addition, odds ratio (OR) analysis and the Hosmer and Lemeshow test were used to analyze the results. The work draws attention to the impact of improper tire pressure on tire durability and road safety as well as the functioning of other active safety systems. In addition, attention was drawn to drivers' awareness of the need to control the pressure in the wheels of the vehicle. Based on the analysis it was found that the age of the vehicle used and the driver's knowledge have the greatest impact on the correct tire pressure. Studies have shown that in over 60% of the vehicles analyzed, the tire pressure was normal.

23 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
STSławomir Tarkowski
Sławomir Tarkowski
ANAleksander Nieoczym
Aleksander Nieoczym
Jacek CabanJacek Caban
Jacek Caban
PJPetr Jilek
Petr Jilek
MSMarie Sejkorová
Marie Sejkorová
The article presents the results of simulations using the finite element method (FEM) aimed at examining the extent of damage to the wheel rim as a result of hitting an obstacle. The obtained results can be used as comparative data during the performance of expert opinions to give an answer as to how the damage occurred. The data obtained from the FEM simulation can also be used in the process of geometric optimization of the rim, which aims to obtain a rim resistant to this type of damage.

30 December 2022 in The Archives of Automotive Engineering - Archiwum Motoryzacji
Verified
Journal Article
Open access
STSławomir Tarkowski
Sławomir Tarkowski
Jacek CabanJacek Caban
Jacek Caban
MDMariusz Dzieńkowski
Mariusz Dzieńkowski
ANAleksander Nieoczym
Aleksander Nieoczym
JZJanusz Zarajczyk
Janusz Zarajczyk
The driver's reaction time is one of the most important parameters for the road pre-accident analysis. There are known the results of tests, in which the value of this parameter was determined in expected and unexpected road situations. But in some cases, this time may be longer e.g. in situations in which the driver's attention may be distracted by keeping observations other than the area, in front of the car's surroundings. There are many manoeuvres, when the driver is obliged to observe many areas at the same time. Thus, his attention must be turned away from the main area – in front of the vehicle. The paper presents the results of tests involving the measurement of the driver's attention time focused on observing the surrounding other than the car's path. During the test, the driver's attention was focus on observing the side and back mirror, car radio and at the mobile phone. Certain values can be potentially considered as extending the typical driver's reaction time. The results of the presented tests have practical applications and can be used in the process of issuing opinions on traffic accidents.