2 December 2020 in IEEE Transactions on Electron Devices
A Ka-band AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistor (MIS-HEMT) with SiN gate dielectric grown by plasma-enhanced atomic layer deposition (PEALD) is demonstrated. The gate reverse leakage current in a controlled HEMT is reduced by about three orders of magnitude by the PEALD-SiN, contributing to an improved breakdown voltage of 92.5 V (source-drain separation of 2.0 μm) in the fabricated MIS-HEMTs. The MIS-HEMTs also feature small threshold voltage hysteresis in dc transfer and capacitance-voltage characterizations, suggesting a good PEALD-SiN/AlGaN interface. The fabricated MIS-HEMTs deliver a high output power density of 7.16 W/mm and a peak power-added efficiency of 60.3%, respectively, at VDS = 30 V and VDS = 10 V in pulse mode at 28 GHz. PEALD-SiN could be a compelling gate dielectric for fabrication of high-power and high-efficiency MIS-HEMTs.
1 February 2019 in Advanced Electronic Materials
7 December 2020 in IEEE Transactions on Electron Devices
SiC MOSFET integrated with Schottky barrier diode (SBD) can handle the reverse current during switching operation and reduce the package cost. However, the integrated SBD weakens the high-voltage-withstanding capability of the SiC MOSFET. In this article, a novel 4H-SiC trench MOSFET integrated with mesa-sidewall SBD (TMS-SBD) is proposed and studied with the 2-D simulation. Compared with the trench MOSFET integrated with the SBD locating on the mesa (TM-SBD), the TMS-SBD shows a larger breakdown voltage (BV), a lower electric field in the gate oxide, and a better tradeoff between BV and specific ON-resistance. The TMS-SBD also shows the same current capability as that of the TM-SBD. Due to the removal of one sidewall overlap between the gate electrode and drain electrode, the reverse capacitance of TMS-SBD is lower than that of the TM-SBD. In double-pulse test simulation, the turn-on loss and turn-off loss of the TMS-SBD reduce by 30% and 56% than those of the TM-SBD, respectively. Therefore, the TMS-SBD is a more attractive device in high-voltage, high-reliability, and low-switching-loss applications.
19 August 2020 in Advanced Electronic Materials
28 June 2018 in Advanced Electronic Materials
3 June 2019 in Advanced Electronic Materials