11 June 2025 in Measurement Science and Technology
Electrostatic actuation of the gravitational reference system is critical for TianQin. This actuation must function effectively in both wide range and high resolution modes. However, amplitude fluctuations of the AC control voltage on non-sensitive axes can adversely affect the sensitivity of the sensitive axis, imposing stringent requirements on the amplitude stability of AC actuation. Traditional open-loop actuation, constrained by the limitations of the high-voltage amplifier (HVA), has difficulty meeting this demand. To address this, we developed an AC actuation prototype based on the noise shaping technique to suppress the HVA gain instability. Furthermore, we built an evaluation platform with a measurement resolution of 0.05 at 1 mHz to assess AC amplitude stability. Experimental results demonstrate that the actuation improves AC amplitude stability from 8 in the open loop design to 1 at 1 mHz. Further analysis indicates that the ADC’s voltage reference is the primary factor limiting amplitude stability, providing a clear pathway for future optimization.
21 November 2025 in Classical and Quantum Gravity
Releasing the test mass (TM) is a critical phase of inertial sensors for gravitational wave detection. The grabbing positioning and release mechanism inevitably generates large initial momentum making TM capture control particularly challenging. To maximize the controllable range, this paper presents a time-division control strategy for the TM release phase. Simulation results show that the proposed method significantly enlarges the capture range, enabling robust capture under large initial state.
12 December 2020 in Complexity
Aiming at the oscillation suppression of spacecraft with large flexible appendages, we propose a control strategy using H∞ control. The weighting functions are designed for the specific flexible modes of the spacecraft and the frequency of harmonic interference in its operating environment. Taking into account the structural uncertainty of systematic modeling and the comprehensive performance requirements of system bandwidth constraint and attitude stability, the H∞ comprehensive performance matrix is constructed. A space telescope with a large flexible solar array is presented as an illustrative example, and a control design that meets the requirement for pointing accuracy is proposed. The simulation results show that the designed controller satisfies the requirements of attitude stability and high pointing accuracy and has effectively suppressed the disturbance of endemic frequency. The design scheme and selection method of the weight function shown in this paper can be a reference for the controller design for oscillation suppression of this type of spacecraft with flexible structures.
22 May 2026 in Measurement
17 March 2026 in SSRN Electronic Journal
Space-borne gravitational wave detection demands an inertial sensor with a residual acceleration resolution for the test mass (TM) on the order of 10-15 m/s2/Hz1/2. To suppress electrostatic control noise, this study proposes a minimum-stiffness electrostatic actuation algorithm. The performance of the proposed method is found to be scenario-dependent: under small displacement offsets, it significantly reduces the average electrostatic stiffness and actuation coupling noise by over an order of magnitude compared to traditional constant-stiffness algorithms, thereby enabling TM residual acceleration to surpass the mission requirements. Conversely, under large offset conditions, the constant-stiffness algorithm demonstrates superior robustness by maintaining stable residual acceleration below the prescribed threshold.