9 November 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
16 March 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper provides a detailed analysis of the power electronics solutions enabling bipolar dc grids. The bipolar dc grid concept has proven to be more efficient, flexible and higher in quality than the conventional unipolar one. However, despite its many features, these systems still have to overcome their issues with asymmetrical loading to avoid voltage imbalances, besides meeting regulatory and safety requirements that are still under development. Advances in power electronics and the large-scale deployment of dc consumer appliances has put this growing architecture in the spotlight, as it has drawn the attention of different research groups recently. The following pages provide an insightful discussion regarding the topologies that enable these architectures, their regulatory requirements besides their features and level of development. Additionally, some future trends and challenges in the further development of this technology are discussed to motivate future contributions that address open problems and explore new possibilities.
20 March 2017 in IEEE Systems Journal
In a high penetrated wind farm power system, wind farms can collaborate to control the power system frequency as like as conventional units. This paper presents a novel model to control the frequency of the wind farm connected to conventional units. Throughout the proposed frequency control, the integral controller, washout filter, and the PID controller could determine the active power variation value in different situations. In fact, a PID controller makes the wind farm aware of power variations. To improve the efficiency of the model, the defined frequency control parameters (i.e., PID coefficients) are optimized based on a multiobjective function using particle swarm optimization algorithm. This study has a unique perspective based on the wind farm collaboration through inertia control, primary frequency control, and supplementary frequency control of the system. A swift power reserve in a stable condition is needed in which wind farm can ameliorate the system frequency response. It is worth saying that the wind farm consists of variable speed turbines, such as a doubly fed induction generator, or a permanent magnet synchronous generator. To assess the performance of the proposed model, it is applied to a typical two-area system and the results are compared.
22 October 2018 in IET Renewable Power Generation
In this study, the authors represent a modelling to analyse and simulate renewable power generation for two area power systems in the presence of high penetrated wind farm. The performance of assumed power systems may hazard without appropriate frequency amelioration methodologies. To complete the LFC model for two area power systems, the combination of automatic generation control and automatic voltage regulation of thermal units is considered. Due to the decline in the total inertia of power system associated with wind farm contribution, the self‐tuning and adaptive fuzzy‐based PID droop can be proposed in the structure of wind turbines instead of the fixed/traditional PID droop in de‐loaded area to ameliorate the frequency excursions. Besides, the artificial bee colony algorithm can tune the parameters of membership functions for input and output signals based on a multi‐objective function (MOF). The proposed strategy control is proved to be accurately stable under various load changes and yields more satisfactory performance in comparison to the conventional PID droop. This research generally includes wind farm collaboration in the frequency control by inertia, primary and secondary frequency control.
30 April 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Pulsewidth modulation current source converter (CSC)-based drive is one of the widely used drives in high-power (megawatt level) medium-voltage (MV) (2.3-6.6 kV) applications. The switching frequency of the MV CSC is limited to around 500 Hz to satisfy thermal requirement and reduce switching loss. Under such a condition, the overall performance of the used modulation scheme, especially its harmonics performance, is an important consideration for CSC-based drives. To date, a couple of modulation schemes have been proposed for MV CSCs, and this paper aims to present an overview of these modulation schemes. Traditional modulation schemes are reviewed, the recent advances are illustrated and analyzed, and the challenges and trends are discussed.
15 January 2018 in IEEE Transactions on Industrial Electronics
Delta-channel modular multilevel converter (MMC) proved successful for zero/low-fundamental-frequency operation without injecting common-mode voltage. However, its application in a medium-voltage variable-speed motor drive is not verified. This paper develops a variable-speed motor drive system based on a delta-channel MMC. The converter power losses together with the compensation strategies are analyzed, and accordingly the submodule capacitor voltage controls are elaborated. The converter controls cascaded with the advanced motor control form the entire control scheme for the drive system. The system performances are tested based on a 4160-V 1-MW simulation model and 208-V 5-kW experimental setup. The results show that the delta-channel MMC along with the proposed control algorithm performs satisfactorily in a driving motor from standstill to a rated speed even under rated torque condition.