8 December 2022 in Journal of Engineering for Gas Turbines and Power
The integration of rotating machineries in human-populated environments requires to limit noise emissions, with multiple aspects impacting on control of amplitude and frequency of the acoustic signature. This is a key issue to address and when combined with compliance of minimum efficiency grades, further complicates the design of axial fans. The aim of this research is to assess the capability of unsupervised learning techniques in unveiling the mechanisms that concur to the sound generation process in axial fans starting from high-fidelity simulations. To this aim, a numerical dataset was generated by means of large Eddy simulation (LES) simulation of a low-speed axial fan. The dataset is enriched with sound source computed solving a-posteriori the perturbed convective wave equation (PCWE). First, the instantaneous flow features are associated with the sound sources through correlation matrices and then projected on latent basis to highlight the features with the highest importance. This analysis in also carried out on a reduced dataset, derived by considering two surfaces at 50% and 95% of the blade span. The sampled features on the surfaces are then exploited to train three cluster algorithms based on partitional, density and Gaussian criteria. The cluster algorithms are optimized and their results are compared, with the Gaussian Mixture one demonstrating the highest similarity (>80%). The derived clusters are analyzed, and the role of statistical distribution of velocity and pressure gradients is underlined. This suggests that design choices that affect these aspects may be beneficial to control the generation of noise sources.
26 March 2009 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
The use of high-speed radial impellers is very common in blowers for industrial application. It is also very common to manufacture these impellers using circular arc blades. The design process as well is almost always based on former impeller series and experimental data available. In this work, a method is presented to improve the efficiency of radial impellers with a combined analytical and numerical method. This method is based on an extended analytical formulation of the flow in radial impellers, allowing optimizing efficiency in the design stage. It is complemented by the mathematical implementation of a well-known qualitative principle of efficiency optimization according to Carnot. Finally, the torque-speed characteristic of the motor is included in the design stage. The blade shapes are computed using an inverse method. The design is then validated by means of computational fluid dynamics (CFD) computation with a commercial solver. Finally, a prototype was built and measurements were carried out in a test rig. It is also shown that the design method provided very good predictions leading to an efficiency increase of 13 per cent and a maximum flowrate increase of 11 per cent. The design point was also met. It is also shown that the numerical computations and measurements are in good agreement. An analysis of the CFD results is also presented, giving an insight view into the substantial flow information within the old and the new impellers. The method presented is a combined analytical and numerical method suited to design high-efficiency radial impellers considering also the torque-speed characteristic of the motor without the need of a previous impeller series or knowledge of experimental data.
21 August 2025 in International Journal of Heat and Mass Transfer