Recent developments within the field of medium voltage wide-bandgap semiconductor devices are drawing attention from both researchers and industries due to the demanding requirements for more efficient high-power energy conversion. The rapid development has entailed an increased awareness of the negative impact of the increased rate of change in voltage, d v /d t , and its derived issues caused by the inevitable parasitic capacitive couplings. This article is dedicated to present an overview of the parasitic capacitive couplings in high-power medium voltage power electronic converter systems, using an example reference system enabled by medium voltage SiC mosfet s. The definitions of capacitive couplings are presented and the impacts raised by parasitic capacitive couplings are reviewed. In addition, the similarities of different capacitive couplings introduced by components in practical medium voltage systems are presented and summarized. Lastly, the challenges and future work with respect to parasitic capacitive couplings in medium voltage power electronics converter systems are shared from the authors' perspective.
30 December 2020 in IEEE Transactions on Power Electronics
This paper characterizes three parasitic capacitances in copper-foiled medium-voltage inductors. It is found that the conventional modeling method overlooks the effect of the fringe field, which leads to inaccurate modeling of parasitic capacitances in copper-foiled inductors. To address this problem, the parasitic capacitances contributed by the fringe electrical field is identified first, and a physics-based analytical modeling method for the parasitic capacitances contributed by the fringe electrical field is proposed, which avoids using any empirical equations. The total parasitic capacitances are then derived for three different cases with three different core potentials, from which a three-terminal equivalent circuit is derived, and thus, the parasitic capacitances in copper-foiled inductors are explicitly identified. The calculated results show a close agreement with the measured capacitance by using an impedance analyzer. Two recommendations for reducing the parasitic capacitances in copper-foiled inductors are given in this paper.
30 June 2022 in IEEE Transactions on Power Electronics
In high-power medium-voltage applications, inductors usually have multiple windings on a single core, due to the high inductance value and high current stress. The multiple coils are electronically connected in either series or parallel, with considerations of windings loss and cost. However, the differences in parasitic capacitance of inductors using parallel and series connections are not discussed. Therefore, this article reveals that in comparison to parallel connections for windings, utilizing series connection for winding can significantly reduce the parasitic capacitance in multiwindings inductors without sacrificing the power density and adding manufacturing complexities. Physics-based models of parasitic capacitance in inductors with round-cable and copper-foil windings are developed for theoretical analysis. According to the theoretical analysis, the equivalent capacitance contributed by the stored electric field energy between two layers can be halved at least. The theoretical analysis is also verified by FEM simulations. Six prototyped inductors are experimentally compared to validate the theory.
17 July 2020 in IEEE Transactions on Power Electronics
This letter proposes a behavioral model for analyzing the ground current in medium-voltage (MV) inductors. The impedance between the terminals and the ground connection of inductors is measured by the impedance analyzer, which is capacitive at low frequency. In order to characterize this impedance, a multi-stage paralleled RLC circuit is proposed. An analytical method is further developed to calculate parameters of the proposed equivalent circuit, which enables to predict the time-domain response of the ground current in MV inductors. A digital-twin of the double-pulse-test setup is developed in LTspice, where the simulated ground and drain currents show good agreements with the experimental measurements.
21 February 2024 in IEEE Transactions on Power Electronics
It is commonly assumed that power semiconductor switching losses are the same for high-side and low-side devices in a half-bridge power module. However, this article reveals that the high-side SiC mosfet in a medium-voltage power module exhibits over 40% higher switching energy compared with the low-side SiC mosfet . The loss imbalance is attributed to the parasitic high-side gate capacitance in the power module, which contributes to the equivalent high-side Miller capacitance. A physics-based switching energy dissipation model is, therefore, proposed, distinguishing between low-side and high-side switching energy dissipation. Double pulse testing demonstrates that high-side switching energy dissipation increases by 5 mJ per 2.5-pF increment in the equivalent Miller capacitance, aligning closely with the analytically calculated increase of 6 mJ per 2.5 pF. Continuous power module testing shows a 10 $\mathrm{^{\circ }}$ C increase in high-side junction temperature. The findings from this article offer crucial insights into research, design, and manufacturing of half-bridge modules enabled by SiC mosfet s.
1 January 2026 in IEEE Transactions on Industrial Electronics