Riccardo Leuzzi

Riccardo Leuzzi

Auto-generated profile, based on publicly available information

Riccardo Leuzzi

Department of Electrical and Information Engineering, Politecnico di Bari, Bari, Italy

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 July 2019 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
RLRiccardo Leuzzi
Riccardo Leuzzi
VMVito Giuseppe Monopoli
Vito Giuseppe Monopoli
LRLuca Rovere
Luca Rovere
FCFrancesco Cupertino
Francesco Cupertino
PZPericle Zanchetta
Pericle Zanchetta
The use of fast wide-bandgap devices in high-speed electrical drives with steep pulsewidth modulation voltage waveforms is the main cause of increased stress on the electric machine insulation system and consequently, of reduced reliability of the whole system. This represents a major concern in safety-critical applications, such as in the aerospace and electric transportation fields. The novel contribution of this work is to assess the effects of electrical aging on complex insulation systems (i.e., a whole stator winding) by analyzing easily measurable macroscopic quantities. To this purpose, an electrical aging procedure is defined, and the effects produced on three tested motors are presented. Three different analysis methods are adopted with the aim of assessing the damage caused to an ac motor winding by such steep voltage waveforms and hence to evaluate the state of aging of the insulation system.

30 November 2019 in Energies
Verified
Journal Article
Open access
PDF file
Jelena LoncarskiJelena Loncarski
Jelena Loncarski
VMVito Giuseppe Monopoli
Vito Giuseppe Monopoli
RLRiccardo Leuzzi
Riccardo Leuzzi
LRLeposava Ristić
Leposava Ristić
FCFrancesco Cupertino
Francesco Cupertino
Wide bandgap (WBG) power devices such as silicon carbide (SiC) can viably supply high speed electrical drives, due to their capability to increase efficiency and reduce the size of the power converters. On the other hand, high frequency operation of the SiC devices emphasizes the effect of parasitics, which generates reflected wave transient overvoltage on motor terminals, reducing the life time and the reliability of electric drives. In this paper, a SiC metal-oxide-semiconductor field-effect transistor (MOSFET) based two level (2L) inverter is systematically studied and compared to the performance of Si insulated-gate bipolar transistor (IGBT) based three level (3L) neutral point clamped (NPC) inverter topologies, for high speed AC motor loads, in terms of efficiency, overvoltages, heat sink design, and cost. A fair comparison was introduced for the first time, having the same output voltage capabilities, output current total harmonic distortion (THD), and overvoltages for the three systems. The analysis indicated the convenience of using the SiC MOSFET based 2L inverter for lower output power. In the case of the maximum output power, the heat sink volume was found to be 20% higher for the 2L SiC based inverter when compared to 3L NPC topologies. Simulations were carried out by realistic dynamic models of power switch modules obtained from the manufacturer’s experimental tests and verified both in the LTspice and PLECS simulation packages.

2 April 2022 in Energies
Verified
Journal Article
Open access
PDF file
Samuele GranataSamuele Granata
Samuele Granata
Marco Di BenedettoMarco Di Benedetto
Marco Di Benedetto
Cristina TerlizziCristina Terlizzi
Cristina Terlizzi
RLRiccardo Leuzzi
Riccardo Leuzzi
SBStefano Bifaretti
Stefano Bifaretti
PZPericle Zanchetta
Pericle Zanchetta
This paper presents a comprehensive review of multi-port power electronics converters used for application in AC, DC, or hybrid distribution systems in an Internet of Energy scenario. In particular, multi-port solid-state transformer (SST) topologies have been addressed and classified according to their isolation capabilities and their conversion stages configurations. Non-conventional configurations have been considered. A comparison of the most relevant features and design specifications between popular topologies has been provided through a comprehensive and effective table. Potential benefits of SSTs in distribution applications have been highlighted even with reference to a network active nodes usage. This review also highlights standards and technical regulations in force for connecting SSTs to the electrical distribution system. Finally, two case studies of multi-port topologies have been presented and discussed. The first one is an isolated multi-port bidirectional dual active bridge DC-DC converter useful in fast-charging applications. The second case of study deals with a three-port AC-AC multi-level power converter in H-Bridge configuration able to replicate a network active node and capable of routing and controlling energy under different operating conditions.

11 February 2018 in Machines
Verified
Journal Article
Open access
PDF file
FCFrancesco Cupertino
Francesco Cupertino
RLRiccardo Leuzzi
Riccardo Leuzzi
VMVito Giuseppe Monopoli
Vito Giuseppe Monopoli
Giuseppe Leonardo CascellaGiuseppe Leonardo Cascella
Giuseppe Leonardo Cascella
This paper considers the electromagnetic and structural co-design of superficial permanent magnet synchronous machines for high-speed applications, with the aid of a Pareto optimization procedure. The aim of this work is to present a design procedure for the afore-mentioned machines that relies on the combined used of optimization algorithms and finite element analysis. The proposed approach allows easy analysis of the results and a lowering of the computational burden. The proposed design method is presented through a practical example starting from the specifications of an aeronautical actuator. The design procedure is based on static finite element simulations for electromagnetic analysis and on analytical formulas for structural design. The final results are validated through detailed transient finite element analysis to verify both electromagnetic and structural performance. The step-by-step presentation of the proposed design methodology allows the reader to easily adapt it to different specifications. Finally, a comparison between a distributed-winding (24 slots) and a concentrated-winding (6 slots) machine is presented demonstrating the advantages of the former winding arrangement for high-speed applications.

6 March 2025 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
AVAndrea Volpini
Andrea Volpini
SSSalvatore Riccardo Di Salvo
Salvatore Riccardo Di Salvo
GTGiulia Tresca
Giulia Tresca
RLRiccardo Leuzzi
Riccardo Leuzzi
PZPericle Zanchetta
Pericle Zanchetta
With the increasing integration of renewable energy sources into electrical grids, energy storage systems have become crucial for stability and regulation. Thus, dedicated two-stage AC-DC converters are essential for integrating batteries into the grid infrastructure. These converters typically employ either single-phase or three-phase inverters paired with a Dual Active Bridge (DAB) in a back-to-back configuration, ensuring high efficiency and galvanic isolation. The conventional control scheme for such converters involves two separate PI-based control loops, one for each stage. This paper proposes a novel control strategy based on a Modulated Model Predictive Control (MMPC) algorithm for a two-stage AC-DC converter. The proposed approach utilizes a single cost-function optimization routine to simultaneously control both the grid-side and the battery-side stages, simplifying the control architecture and enhancing performance. Finally, the proposed MMPC is implemented on a DSP and FPGA-based board and the experimental results show that the proposed solution achieves faster dynamics than conventional control with no overshoots or undershoots.

5 July 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
DDDavide D'AMato
Davide D'AMato
RLRiccardo Leuzzi
Riccardo Leuzzi
VMVito Giuseppe Monopoli
Vito Giuseppe Monopoli
Modular multilevel converters are increasingly gaining popularity in various high-voltage and high-power applications. However, their operation poses some technical challenges in implementing the control system, including issues, such as balancing submodule capacitor voltages and mitigating circulating currents. The presence of circulating currents leads to additional power losses, increases thermal stress on the power devices, and shortens their lifetime. This article introduces an innovative control technique to eliminate circulating currents by injecting a low-frequency alternating signal into a single submodule of each converter arm. The proposed method not only addresses circulating current mitigation but is also able to reduce capacitor voltage ripple and peak arm current, thereby enhancing the overall converter's lifespan and efficiency. Results of experimental tests on a seven-level converter are presented to prove the effectiveness of the proposed technique and compare its performance with existing state-of-the-art approaches.