Heat storage is a major problem in the world. Many research is going on the heat storage application. This research investigates the novel Ag/MgO/biochar nanocomposites for heat storage. Ag/MgO/biochar nanocomposites were fabricated using solvent-free ball milling techniques. According to several analytical measurements, the Ag/MgO nanoparticles in biochar are uniformly dispersed across the carbon interface. This type of adsorbent material has been characterized by different techniques such as X-ray diffraction pattern analysis (XRD), FTIR analysis, scanning electron microscope (SEM), and transmission electron microscope (TEM) as all indicate the surface morphology and successful ball milling synthesis of Ag/MgO nanocomposites. The UV visible spectroscopy wavelength range of AgNPs and MgONPs is 330 nm and 470 nm, respectively. FTIR analysis revealed that different functional groups of modified biochar nanocomposites such as O-H group are 3728 cm-1 and for C-H bond is 932 cm-1, C-O group is 1420 cm-1, and C=O is 1785 cm-1, respectively. Adsorption tests showed that 1.0 gL-1 dosage with 60% phosphate removal, an ion, and 0.2 gL-1 of dosages that had 85% methylene blue decomposition, a charged synthetic dye, were the lowest absorption levels. This research suggests that ball milling offers the advantages of stabilization and chemical adaptability for customized remediation of different atmospheric contaminants. Ball milling is a facile and feasible process to fabricate carbon-metal-oxide nanomaterials.
In this work, an attempt was made to machine the AZ91/5B4C/5Gr hybrid composites in a castor oil electric discharge medium with an objective of attaining green environment. The hybrid composites were produced using stir casting technique in a protective environment. Experiments were conducted by varying dielectric fluid (castor oil and hydrocarbon oil), tool materials (copper, graphite, and brass), polarity, current, pulse-on time, and gap distance in Al2O3 mixed dielectric medium. L36 Taguchi approach was adopted for the design of experiments, and machining performance was accessed in terms of material removal rate (MRR), tool wear rate (TWR), and surface roughness (Ra). Because of castor oils high thermal conductivity, high kinematic viscosity, and lower dielectric strength, the specimen exhibits 5 higher MRR than EDM oil. When the electrodes were connected to the negative polarity, the Ra was 1.72μm and 3.66μm at positive polarity; however, at negative polarity, the TWR was higher than the MRR. The high density and specific heat of castor oil facilitate flushing and uniform heat distribution; as a result, the composite had a Ra of 2.52μm compared to 2.86μm when machined with conventional EDM oil. Surface topography showed the specimen machined with hydrocarbon dielectric medium proffers black spots, which were eliminated in castor dielectric medium. Best parametric combination was selected by the Relative Index Method optimization technique.
25 January 2024 in Biomass Conversion and Biorefinery