24 May 2023 in IEEE Internet of Things Journal
At-home screening systems for obstructive sleep apnea (OSA) can bring convenience to remote chronic disease management. However, the unsupervised home environment is subject to spoofing and unintentional interference from the household member. To improve robustness, this work presents SIENNA, an insider-resistant breathing-based authentication/pairing protocol. SIENNA leverages the uniqueness of breathing patterns to automatically and continuously authenticate a user and pairs a mobile OSA app and a physiological monitoring radar system (PRMS). SIENNA does not require biometric enrollment and instead transforms the respiratory measurements taken during the user’s routine physical checkup into breathing biometrics comparable with the PRMS readings. Furthermore, it can operate within a noisy multitarget home environment and is secure against a co-located attacker through the usage of joint approximate diagonalization of eignematric-independent component analysis, fuzzy commitment, and friendly jamming. We fully implemented SIENNA and evaluated its performance with medium-scale trials. Results show that SIENNA can achieve reliable $(>90$ % success rate) user authentication and secure device pairing in a noisy environment against an attacker with full knowledge of the authorized user’s breathing biometrics.
1 November 2023 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
This paper proposes an active low latency attack detection algorithm to improve the cybersecurity of grid-connected photovoltaic (PV) systems. The algorithm is developed by using a hybrid model- and data-driven approach, where the test statistics are formulated by using both the physical model of the PV farm and historical measurements. Unlike most previous detection algorithms that mainly focus on detection accuracy, the proposed algorithm aims at minimizing detection delay while ensuring detection accuracy. The low latency detection algorithm is developed by designing a generalized cumulative sum (CUSUM) detector with a dynamic watermark, which can detect cyberattacks even if the adversary has full knowledge of the system model. To evaluate the performance of the low latency detection algorithm, we propose to measure the stealthiness of cyberattacks by using the Kullback-Leibler (KL) divergence between the pre- and post-attack distributions of the test statistics. Simulation results demonstrate that the proposed algorithm can accurately detect cyberattacks with minimum delays.
14 December 2022 in IEEE Journal of Microwaves
Wireless communications systems provide channel state information (CSI), which can be used to characterize the physical propagation environment. The small physiological motion of human subjects in that environment, such as that associated with respiration, can modulate the CSI, thus allowing wireless physiological sensing through which a communications system detects and monitors cardiopulmonary motion. NextG millimeter-wave communications systems present even greater opportunities for wireless physiological sensing due to the advantages of small wavelength and high directionality. But challenges also arise due to the multipath effect and phase aliasing caused by larger-than-wavelength motion displacement. This work introduces a comprehensive mathematical CSI model to accurately characterize physiological motion captured by the amplitude and phase of the CSI of a millimeter-wave communications system. The model allows for the interpretation of intricate CSI pattern variations to avoid aliasing error and has been validated with experiments involving both parametric measures conducted with a robotic mover and respiration rate measurements for human subjects. In all cases, rate measurements could be consistently resolved within 10%, or 0.02 Hz, demonstrating the potential for incorporating physiological sensing in NextG millimeter-wave communications systems.
23 October 2024 in IEEE/ACM Transactions on Networking
Despite the promises of current and future cellular networks to increase security, privacy, and robustness, 5G networks are designed to streamline discovery and initiate connections with limited computation and communication costs, leading to the predictability of control channels. This predictability enables signal-level attacks, particularly on unprotected initial access signals. To assess vulnerability in access control and enhance robustness in cellular networks, we present a strategic approach leveraging O-RAN architecture in this paper that detects and classifies signal-level attacks for actionable countermeasure defense. We evaluate attack scenarios of various power levels on both 4G/LTE-Advanced and 5G communication systems. We categorize the types of attack models based on the attack cost: Overshadowing and Jamming. Overshadowing represents low attack power categories with time and frequency synchronization, while Jamming represents un-targeted attacks that cause similar quality-of-service degradation as overshadowing attacks but require high power levels. Our detection strategy relies on supervised machine-learning models, specifically a Reservoir Computing (RC) based supervised learning approach that leverages physical and MAC-layer information for attack detection and classification. We demonstrate the efficacy of our detection strategy through extensive experimental evaluations using the O-RAN platform with software-defined radios (SDRs) and commercial off-the-shelf (COTS) user equipment (UEs). Empirical results show that our method can classify the change in statistics caused by most overshadowing and jamming attacks with more than 95% classification accuracy.
15 November 2024 in IEEE Transactions on Mobile Computing
The unpredictability of the wireless channel has been used as a natural source of randomness to build physical-layer security primitives for shared key generation, authentication, access control, proximity verification, and other security properties. Compared to pseudo-random generators, it has the potential to achieve information-theoretic security. In sub-6 GHz frequencies, the randomness is harvested from the small-scale fading effects of RF signal propagation in rich scattering environments. However, the RF propagation characteristics follow sparse models with clustered paths when devices operate in millimeter-wave (mmWave) bands (5G and Next-Generation networks, Wi-Fi in 60GHz). Millimeter-wave transmissions are typically directional to increase the gain and combat high signal attenuation, leading to stable and more predictable channels. In this paper, we first demonstrate that state-of-the-art methods relying on channel state information or received signal strength measurements fail to produce high randomness. Accounting for the unique features of mmWave propagation, we propose a novel randomness extraction mechanism that exploits the random timing of channel blockage to harvest random bits. Compared with the prior art in CSI-based and context-based randomness extraction, our protocol remains secure against passive and active Man-in-the-Middle adversaries co-located with the legitimate devices. We demonstrate the security properties of our method in a 28 GHz mmWave testbed in an indoor setting.