Technologies for producing liquid-phase polymer composites of carbon nanofibers and their modifications are presented: carboxylated carbon nanotubes, polyaniline-modified nanotubes, supercondensate of multiwalled carbon nanotubes in epoxy phenol–formaldehyde resins. Polymeric composites with microwave absorption capabilities are considered.
1 January 2022 in Image Journal of Advanced Materials and Technologies
The sorption materials based on graphene oxide (GO) modified with a chitosan coating (GO/CS) and a lignin derivative, lignosulfonate (GO/LS), were developed by the authors to remove heavy metal ions from aqueous media. The technology for obtaining sorbents involved the formation of a hydrogel and its subsequent lyophilization in order to preserve the porous space. The synthesized nanostructured sorbents were characterized on the basis of transmission electron microscopy with the elemental analysis, the surface area measurement and the thermogravimetric analysis (BET). The thermogravimetric analysis showed that nanocomposites decompose in two stages: 3 – 5 % weight loss at temperatures up to 250 – 270 °С and 40 – 50 % weight loss at temperatures up to 750 – 770 °С. The measured BET surface area for GO/LS and GO/CS was 85.34 and 73.256 m2⋅g–1, respectively. Batch sorption experiments were carried out at pH = 6, followed by the quantitative adsorption of Cu2+ and Pb2+ using atomic absorption spectrometry. According to the results of the experimental studies, the best ratio of the initial components of the nanocomposites was established. For the GO/LS nanocomposite, the ratio of 2 : 1 was chosen for further studies, and 100 : 1 for the GO/CS nanocomposite. The value of the adsorption capacity for these compositions for lead was: 178.1 mg⋅g–1 for GO/LS; 197.38 mg⋅g–1 for GO/CS; and for copper: 162.39 mg⋅g–1 for GO/LS, 186.17 mg⋅g–1 for GO/CS.
Effect of regimes of fabrication of nanostructured polymer composites filled with carbon nanotubes on electrophysical characteristics is analyzed. Dependence of the conductivity of composites in a frequency interval of 50 Hz–5 MHz and a temperature interval of 15–375 K on the dimensional effect of multi-walled carbon nanotubes, method for functionalization, and method for ultrasonic processing is studied. It is shown that different effects of electric transport in composites affect the resulting conductivity. The best electrophysical parameters are obtained with the aid of noncovalent functionalization of nanotubes and focused ultrasound treatment. The method makes it possible to obtain a composite conductivity of 0.01 S/сm in the specified frequency interval at a filler concentration of 0.5 wt %.