In large-scale photovoltaic (PV) power plants, the integration of a battery energy storage system (BESS) permits a more flexible operation, allowing the plant to support grid stability. In hybrid PV+BESS plants, the storage system can be integrated by using different power conversion system (PCS) layouts and different charge–discharge strategies. In the AC-coupling layout, the BESS is connected to the ac-side of the system through an additional inverter. In the DC-coupling layout, the BESS is connected to the dc-side, with or without a dedicated dc–dc converter, and no additional inverter is needed. Referring to a 288 MWp PV plant with a 275 MWh BESS, this paper compares the PCS efficiency between AC- and DC-coupling solutions. The power injected into the grid is obtained considering providing primary power-frequency regulation services. A charging and discharging strategy of the BESS is proposed to ensure cyclic battery energy shifting. The power flows in the different components of the system that are obtained under realistic operating conditions, and total energy losses and annual average efficiency are calculated accordingly. Finally, results show a higher efficiency of DC-coupling compared to the AC-coupling layout.
In the context of electric vehicle (EV) development and positive energy districts with the growing penetration of non-programmable sources, this paper provides a method to predict and manage the aggregate power flows of charging stations to optimize the self-consumption and load profiles. The prediction method analyzes each charging event belonging to the EV population, and it considers the main factors that influence a charging process, namely the EV’s characteristics, charging ratings, and driver behavior. EV’s characteristics and charging ratings are obtained from the EV model’s and charging stations’ specifications, respectively. The statistical analysis of driver behavior is performed to calculate the daily consumptions and the charging energy request. Then, a model to estimate the parking time of each vehicle is extrapolated from the real collected data of the arrival and departure times in parking lots. A case study was carried out to evaluate the proposed method. This consisted of an industrial area with renewable sources and electrical loads. The obtained results show how EV charging can negatively impact system power flows, causing load peaks and high energy demand. Therefore, a charging management system (CMS) able to operate in the smart charging mode was introduced. Finally, it was demonstrated that the proposed method provides better EV integration and improved performance.
Electric vehicles (EVs) penetration growth is essential to reduce transportation-related local pollutants. Most countries are witnessing a rapid development of the necessary charging infrastructure and a consequent increase in EV energy demand. In this context, power demand forecasting is an essential tool for planning and integrating EV charging as much as possible with the electric grid, renewable sources, storage systems, and their management systems. However, this forecasting is still challenging due to several reasons: the still not statistically significant number of circulating EVs, the different users’ behavior based on the car parking scenario, the strong heterogeneity of both charging infrastructure and EV population, and the uncertainty about the initial state of charge (SOC) distribution at the beginning of the charge. This paper aims to provide a forecasting method that considers all the main factors that may affect each charging event. The users’ behavior in different urban scenarios is predicted through their statistical pattern. A similar approach is used to forecast the EV’s initial SOC. A machine learning approach is adopted to develop a battery-charging behavioral model that takes into account the different EV model charging profiles. The final algorithm combines the different approaches providing a forecasting of the power absorbed by each single charging session and the total power absorbed by charging hubs. The algorithm is applied to different parking scenarios and the results highlight the strong difference in power demand among the different analyzed cases.
Electric car-sharing (ECS) is an increasingly popular service in many European cities. The management of an ECS fleet is more complex than its thermal engine counterpart due to the longer ”refueling“ time and the limited autonomy of the vehicles. To ensure adequate autonomy, the ECS provider needs high-capacity charging hubs located in urban areas where available peak power is often limited by the system power rating. Lastly, electric vehicle (EV) charging is typically entrusted to operators who retrieve discharged EVs in the city and connect them to the charging hub. The timing of the whole charging process may strongly differ among the vehicles due to their different states of charge on arrival at the hub. This makes it difficult to plan the charging events and leads to non-optimal exploitation of charging points. This paper provides a smart charging (SC) method that aims to support the ECS operators’ activity by optimizing the charging points’ utilization. The proposed SC promotes charging duration management by differently allocating powers among vehicles as a function of their state of charge and the desired end-of-charge time. The proposed method has been evaluated by considering a real case study. The results showed the ability to decrease charging points downtime by 71.5% on average with better exploitation of the available contracted power and an increase of 18.8% in the average number of EVs processed per day.
Electrical power grids are rapidly evolving into smart grids, with smart homes also making an important contribution to this. In fact, the well-known and emerging technologies of renewables, energy storage systems and electric mobility are each time more distributed throughout the power grid and included in smart homes. In such circumstances, since these technologies are natively operating in DC, it is predictable for a revolution in the electrical grid craving a convergence to DC grids. Nevertheless, traditional loads natively operating in AC will continue to be used, highlighting the importance of hybrid AC/DC grids. Considering this new paradigm, this paper has as main innovation points the proposed control algorithms regarding the role of front-end AC/DC converters in hybrid AC/DC smart homes, demonstrating their importance for providing unipolar or bipolar DC grids for interfacing native DC technologies, such as renewables and electric mobility, including concerns regarding the power quality from a smart grid point of view. Furthermore, the paper presents a clear description of the proposed control algorithms, aligned with distinct possibilities of complementary operation of front-end AC/DC converters in the perspective of smart homes framed within smart grids, e.g., enabling the control of smart homes in a coordinated way. The analysis and experimental results confirmed the suitability of the proposed innovative operation modes for hybrid AC/DC smart homes, based on two different AC/DC converters in the experimental validation.
The growing penetration of distributed renewable energy sources (RES) together with the increasing number of new electric vehicle (EV) model registrations is playing a significant role in zero-carbon energy communities’ development. However, the ever-larger share of intermittent renewable power plants, combined with the high and uncontrolled aggregate EV charging demand, requires an evolution toward new planning and management paradigms of energy districts. Thus, in this context, this paper proposes novel smart charging (SC) techniques that aim to integrate as much as possible RES generation and EV charging demand at the local level, synergically acting on power flows and avoiding detrimental effects on the electrical power system. To make this possible, a centralized charging management system (CMS) capable of individually modulating each charging power of plugged EVs is presented in this paper. The CMS aims to maximize the charging self-consumption from local RES, flattening the peak power required to the external grid. Moreover, the CMS guarantees an overall good state of charge (SOC) at departure time for all the vehicles without requiring additional energy from the grid even under low RES power availability conditions. Two methods that differ as a function of the EV power flow direction are proposed. The first SC only involves unidirectional power flow, while the second one also considers bidirectional power flow among vehicles, operating in vehicle-to-vehicle (V2V) mode. Finally, simulations, which are presented considering an actual case study, validate the SC effects on a reference scenario consisting of an industrial area having a photovoltaic (PV) plant, non-modulable electrical loads, and EV charging stations (CS). Results are collected and performance improvements by operating the different SC methods are compared and described in detail in this paper.