soufiane krik

Mr. soufiane krik

Department of Physics and Earth Sciences, University of Ferrara
+1

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 August 2024 in Nano Futures
Verified
Journal Article
Open access
VPVincenzo Pecunia
Vincenzo Pecunia
LPLuisa Petti
Luisa Petti
Joseph AndrewsJoseph Andrews
Joseph Andrews
RORiccardo Ollearo
Riccardo Ollearo
GGGerwin H Gelinck
Gerwin H Gelinck
WLWei Lin Leong
Wei Lin Leong
The dissemination of sensors is key to realizing a sustainable, ‘intelligent’ world, where everyday objects and environments are equipped with sensing capabilities to advance the sustainability and quality of our lives—e.g. via smart homes, smart cities, smart healthcare, smart logistics, Industry 4.0, and precision agriculture. The realization of the full potential of these applications critically depends on the availability of easy-to-make, low-cost sensor technologies. Sensors based on printable electronic materials offer the ideal platform: they can be fabricated through simple methods (e.g. printing and coating) and are compatible with high-throughput roll-to-roll processing. Moreover, printable electronic materials often allow the fabrication of sensors on flexible/stretchable/biodegradable substrates, thereby enabling the deployment of sensors in unconventional settings. Fulfilling the promise of printable electronic materials for sensing will require materials and device innovations to enhance their ability to transduce external stimuli—light, ionizing radiation, pressure, strain, force, temperature, gas, vapours, humidity, and other chemical and biological analytes. This Roadmap brings together the viewpoints of experts in various printable sensing materials—and devices thereof—to provide insights into the status and outlook of the field. Alongside recent materials and device innovations, the roadmap discusses the key outstanding challenges pertaining to each printable sensing technology. Finally, the Roadmap points to promising directions to overcome these challenges and thus enable ubiquitous sensing for a sustainable, ‘intelligent’ world.

1 November 2021 in Sensors and Actuators B: Chemical
Verified
Journal Article
Closed access
Elena SpagnoliElena Spagnoli
Elena Spagnoli
SKsoufiane krik
soufiane krik
BFB. Fabbri
B. Fabbri
MVMatteo Valt
Matteo Valt
MAMatteo Ardit
Matteo Ardit
VGV. Guidi
V. Guidi

6 February 2022 in Sensors
Verified
Journal Article
Open access
PDF file
ZFZhifu Feng
Zhifu Feng
AGAndrea Gaiardo
Andrea Gaiardo
MVMatteo Valt
Matteo Valt
Barbara FabbriBarbara Fabbri
Barbara Fabbri
DCDavide Casotti
Davide Casotti
Vincenzo GuidiVincenzo Guidi
Vincenzo Guidi
Tin dioxide (SnO2) is the most-used semiconductor for gas sensing applications. However, lack of selectivity and humidity influence limit its potential usage. Antimony (Sb) doped SnO2 showed unique electrical and chemical properties, since the introduction of Sb ions leads to the creation of a new shallow band level and of oxygen vacancies acting as donors in SnO2. Although low-doped SnO2:Sb demonstrated an improvement of the sensing performance compared to pure SnO2, there is a lack of investigation on this material. To fill this gap, we focused this work on the study of gas sensing properties of highly doped SnO2:Sb. Morphology, crystal structure and elemental composition were characterized, highlighting that Sb doping hinders SnO2 grain growth and decreases crystallinity slightly, while lattice parameters expand after the introduction of Sb ions into the SnO2 crystal. XRF and EDS confirmed the high purity of the SnO2:Sb powders, and XPS highlighted a higher Sb concentration compared to XRF and EDS results, due to a partial Sb segregation on superficial layers of Sb/SnO2. Then, the samples were exposed to different gases, highlighting a high selectivity to NO2 with a good sensitivity and a limited influence of humidity. Lastly, an interpretation of the sensing mechanism vs. NO2 was proposed.

16 February 2022 in ACS Sensors
Verified
Journal Article
Open access
Elena SpagnoliElena Spagnoli
Elena Spagnoli
AGAndrea Gaiardo
Andrea Gaiardo
Barbara FabbriBarbara Fabbri
Barbara Fabbri
MVMatteo Valt
Matteo Valt
SKsoufiane krik
soufiane krik
VGVincenzo Guidi
Vincenzo Guidi
Hydrogen is largely adopted in industrial processes and is one of the leading options for storing renewable energy. Due to its high explosivity, detection of H2 has become essential for safety in industries, storage, and transportation. This work aims to design a sensing film for high-sensitivity H2 detection. Chemoresistive gas sensors have extensively been studied for H2 monitoring due to their good sensitivity and low cost. However, further research and development are still needed for a reliable H2 detection at sub-ppm concentrations. Metal-oxide solid solutions represent a valuable approach for tuning the sensing properties by modifying their composition, morphology, and structure. The work started from a solid solution of Sn and Ti oxides, which is known to exhibit high sensitivity toward H2. Such a solid solution was empowered by the addition of Nb, which─according to earlier studies on titania films─was expected to inhibit grain growth at high temperatures, to reduce the film resistance and to impact the sensor selectivity and sensitivity. Powders were synthesized through the sol–gel technique by keeping the Sn–Ti ratio constant at the optimal value for H2 detection with different Nb concentrations (1.5–5 atom %). Such solid solutions were thermally treated at 650 and 850 °C. The sensor based on the solid solution calcined at 650 °C and with the lowest content of Nb exhibited an extremely high sensitivity toward H2, paving the way for H2 ppb detection. For comparison, the response to 50 ppm of H2 was increased 6 times vs SnO2 and twice that of (Sn,Ti)xO2.

30 June 2023 in ACS Applied Materials & Interfaces
Verified
Journal Article
Open access
ARArianna Rossi
Arianna Rossi
Barbara FabbriBarbara Fabbri
Barbara Fabbri
Elena SpagnoliElena Spagnoli
Elena Spagnoli
AGAndrea Gaiardo
Andrea Gaiardo
MVMatteo Valt
Matteo Valt
VGV. Guidi
V. Guidi
Carbon capture, storage, and utilization have become familiar terms when discussing climate change mitigation actions. Such endeavors demand the availability of smart and inexpensive devices for CO2 monitoring. To date, CO2 detection relies on optical properties and there is a lack of devices based on solid-state gas sensors, which can be miniaturized and easily made compatible with Internet of Things platforms. With this purpose, we present an innovative semiconductor as a functional material for CO2 detection. A nanostructured In2O3 film, functionalized by Na, proves to enhance the surface reactivity of pristine oxide and promote the chemisorption of even rather an inert molecule as CO2. An advanced operando equipment based on surface-sensitive diffuse infrared Fourier transform is used to investigate its improved surface reactivity. The role of sodium is to increase the concentration of active sites such as oxygen vacancies and, in turn, to strengthen CO2 adsorption and reaction at the surface. It results in a change in film conductivity, i.e., in transduction of a concentration of CO2. The films exhibit excellent sensitivity and selectivity to CO2 over an extra-wide range of concentrations (250-5000 ppm), which covers most indoor and outdoor applications due to the marginal influence by environmental humidity.

9 February 2023 in Chemosensors
Verified
Journal Article
Open access
PDF file
AOAntonio Orlando
Antonio Orlando
AMAsma Mushtaq
Asma Mushtaq
AGAndrea Gaiardo
Andrea Gaiardo
MVMatteo Valt
Matteo Valt
LVLia Vanzetti
Lia Vanzetti
LPLuisa Petti
Luisa Petti
Solid-state chemiresistive gas sensors have attracted a lot of researchers’ attention during the last half-century thanks to their ability to detect different gases with high sensitivity, low power consumption, low cost, and high portability. Among the most promising sensitive materials, carbon nanotubes (CNTs) have attracted a lot of interest due to their large active surface area (in the range of 50–1400 m2/g, depending on their composition) and the fact that they can operate at room temperature. In this study, single-walled carbon nanotube (SWCNT)-based sensing films were prepared and deposited by spray deposition for the fabrication of gas sensors. For the deposition, various SWCNTs were prepared in deionized water with the addition of specific surfactants, i.e., carboxymethyl cellulose (CMC) and sodium dodecyl sulfate (SDS), which act as dispersing agents to create a suitable ink for deposition. This study aims to elucidate the possible differences in the sensing performance of the fabricated devices due to the use of the two different surfactants. To achieve this goal, all the devices were tested versus ethanol (C2H5OH), carbon monoxide (CO), nitrogen dioxide (NO2), and ammonia (NH3). The produced devices demonstrated high selectivity towards NH3 and NO2. The different sensors, prepared with different deposition thicknesses (from 0.51 nm to 18.41 nm), were tested in dry and wet conditions (40% humidity), highlighting an enhanced response as a function of relative humidity. In addition, sensor performance was evaluated at different working temperatures, showing the best performance when heated up to 150 °C. The best sensing conditions we found were against NO2, sensors with 10 layers of deposition and an operating temperature of 150 °C; in this condition, sensors showed high responses compared those found in the literature (62.5%—SDS-based and 78.6%—CMC-based). Finally, cross-sensitivity measurements showed how the produced sensors are good candidates for the practical and selective detection of NO2, even in the presence of the most important interfering gases identified, i.e., NH3.