The present work explored the adsorptive capacity and catalytic activity of rock powders from basaltic and granitic rocks in the discoloration of synthetic and industrial effluents containing the yellow dye Basic Yellow 96. The rock powders were characterized with scanning electron microscopy associated with energy-dispersive spectroscopy, photoacoustic spectroscopy, N2 physisorption and X-ray diffraction, the latter confirming the abundant presence of silica in the four materials studied. The basaltic powders presented specific surface areas between 7 and 10 times greater than those of granitic materials, which allowed up to 92% removal of the dye in 3 h of test using the basaltic powder. Despite the smaller area, the granitic materials showed considerable photocatalytic activity in 3 h, 94%, the same as that of the basaltic materials in the photocatalysis. Granitic and basaltic photocatalysts proved to be efficient in the discoloration of synthetic and industrial effluents, although TOC analyses indicated that it was not possible to promote the pollutant mineralization in the industrial effluent. Both artificial light and sunlight were effective in the photocatalysis of the dye, although the former was slightly faster.
In recent years, the number of motor vehicles in circulation has increased in proportion to Brazil’s economic growth, resulting in an increase in emissions of toxic gases from combustion, such as nitrogen oxide, particulate matter, carbon dioxide and volatile organic compounds, among other polluting compounds. This type of pollution has its impacts potentiated in large cities, accumulating due to the configuration of streets and buildings in large urban centers, and can even penetrate indoor environments, having harmful effects on the health of residents. To minimize the emission of these gases, catalytic converters can be used in the vehicle exhausts. Catalytic converters are a promising technology used to reduce exhaust emissions from the engine. In this context, this paper presents an overview of the emission of toxic gases by heavy transport powered by diesel oil and the influence of the use of automotive catalysts in reducing the emission of toxic gases. Additionally, a proposal for monitoring the useful life of automotive catalysts is presented through an electronic sensing system, which makes it possible to determine the catalyst efficiency and the appropriate point for its reactivation or replacement.
1 January 2020 in Brazilian Archives of Biology and Technology
The organic compound caffeine when detected in environmental matrices such as surface waters and groundwater is considered as an emerging contaminant, in which its effects are still unknown. Therefore, in the present research, zinc oxide-based catalysts impregnated with iron and silver were prepared for the reaction of caffeine degradation by heterogeneous photocatalysis. The wet impregnation method with excess solvent was applied to the preparation of the materials, later they were characterized by adsorption of N2, X-ray diffraction and photoacoustic spectroscopy. Then, the photodegradation, photolysis and adsorption tests were carried out, in which it was observed that only the presence of the radiation or photocatalysts could not sufficiently degrade the caffeine, however when combined radiation with all the catalysts studied here presented degradation above 70% at the end of 300 minutes of the reaction, and the best catalyst studied was that containing 8% Ag in non-calcined ZnO. Thus, these results point out that the methodology employed in this research, both for the preparation of the catalysts and in the process of the photocatalysis reaction, was efficient in the degradation of the emerging contaminant, caffeine, which could later be used for a mixture of other contaminants.
24 September 2020 in Environmental Science and Pollution Research