This study describes the application of TiO2, ZnO, TiO2–ZnO-based systems modified with 1.5 and 2.5% wt. Fe using the impregnation method for the maxilon blue 5G dye discoloration. Specific surface area (BET method), X-ray diffraction, thermogravimetric analysis, and photoacoustic spectroscopy characterization techniques were used in this work. The presented results indicate that structure alterations, textural properties, nominal metallic charges, and photocatalyst thermal treatment affected the photocatalytic activity of the system. Moreover, all of the synthesized catalysts yielded complete discoloration of the maxilon blue 5G dye within 180 min of reaction. The reaction time required for total discoloration was strongly affected by the temperature of photocatalysts calcination. In general, increasing the catalysts nominal metallic charge improves the adsorption process. A neural model was developed for each studied catalyst using MLP network with three intermediate layers, backpropagation learning algorithm, and sigmoid activation function implemented in FORTRAN. The three models presented the best results with three neurons in the intermediate layer. Therefore, the neural networks can be successfully employed to model the discoloration process involving the synthesized catalyst (R2 varying between 0.98 and 0.99).
In recent years, the number of motor vehicles in circulation has increased in proportion to Brazil’s economic growth, resulting in an increase in emissions of toxic gases from combustion, such as nitrogen oxide, particulate matter, carbon dioxide and volatile organic compounds, among other polluting compounds. This type of pollution has its impacts potentiated in large cities, accumulating due to the configuration of streets and buildings in large urban centers, and can even penetrate indoor environments, having harmful effects on the health of residents. To minimize the emission of these gases, catalytic converters can be used in the vehicle exhausts. Catalytic converters are a promising technology used to reduce exhaust emissions from the engine. In this context, this paper presents an overview of the emission of toxic gases by heavy transport powered by diesel oil and the influence of the use of automotive catalysts in reducing the emission of toxic gases. Additionally, a proposal for monitoring the useful life of automotive catalysts is presented through an electronic sensing system, which makes it possible to determine the catalyst efficiency and the appropriate point for its reactivation or replacement.
The growing demand for environmentally friendly materials has driven extensive research into biopolymer-based nanocomposites with enhanced functional performance. Chitosan, a naturally derived polysaccharide, offers excellent film-forming ability, biodegradability, and antimicrobial potential, making it a promising matrix for sustainable packaging and coating applications. In this study, a distinctive solvent-casting strategy was employed to fabricate chitosan-based nanocomposite films functionalized with dual-action silver/titania (Ag/TiO2) nanoparticles, combining both photocatalytic and metallic antimicrobial mechanisms—an approach that provides broader functionality than conventional single-component fillers. The biodegradable films were systematically characterized for their structural, mechanical, optical, and barrier properties, as well as their antimicrobial performance. The integration of Ag/TiO2 imparted unique synergistic effects, modifying film morphology and color, slightly reducing tensile strength, and enhancing hydrophobicity and structural compactness. The obtained water vapor permeability values (0.013–0.102 g·mm·m−2·h−1·kPa−1) classified the materials as moderate barriers, comparable to or better than many existing chitosan-based systems without nanofiller reinforcement. Notably, films containing 10 wt% Ag/TiO2 achieved a 40.4% reduction in Escherichia coli viability and an 8.2% inhibition of Staphylococcus aureus, demonstrating concentration-dependent antimicrobial activity superior to that of neat chitosan films. Overall, the unique combination of a biodegradable chitosan matrix with multifunctional Ag/TiO2 nanofillers offers clear advantages over traditional biopolymer films, highlighting their potential as advanced materials for active food packaging and antimicrobial surface coatings.
Brewer’s spent grains (BSG) are a significant by-product of beer production, and its improper disposal poses environmental challenges. This study investigated the use of BSG for activated carbon production with phosphoric acid as a chemical activator and its application in cheese whey remediation through liquid-phase adsorption. The adsorbent was thoroughly characterized through using techniques such as FTIR, SEM, N2 isotherms, and surface charge distribution. The adsorbent exhibited substantial pores, a high surface area (605.1 m2 g–1), good porosity, and positive surface charges that facilitated favorable interactions with cheese whey compounds. Equilibrium was achieved in 330 min for lactose, BOD5, and COD. The maximum adsorption capacities were 12.77 g g–1 for lactose, 3940.99 mg O2 g–1 for BOD5, and 12,857.92 mg O2 g−1 for COD at 318 K. Removing these adsorbates from cheese whey effluent reduces its organic load, enabling water reuse in the manufacturing unit, depending on its intended use. The adsorption process was spontaneous and endothermic, with ΔH° ≥ 265.72 kJ mol−1. Additionally, the activated carbon produced demonstrated impressive regeneration capability with sodium hydroxide, maintaining 75% of its adsorption capacity. These results emphasize the potential of activated carbon as an effective adsorbent for cheese whey remediation, providing a sustainable solution for waste management in the dairy industry and water reuse.
This study explores the photocatalytic efficiency of Zn/Fe/TiO2 catalysts, synthesized via the wet impregnation method, for degrading the food colorings Allura Red and Tartrazine Yellow. A 22 factorial design with a central point replication guided the catalyst synthesis. Characterization involved BET surface area analysis, SEM-EDX, XRD, and PZC determination. Photocatalytic tests were conducted in batch mode under natural sunlight with 10 mg L−1 food coloring solutions. Kinetic modeling and statistical analysis were performed, and catalyst reuse was evaluated under artificial light. Results showed that low calcination temperatures (200–273 °C) and Zn loadings of 2–10% led to nearly 99% discoloration and degradation efficiency. The Behnajady–Modirshahla–Ghanbery kinetic model best described the discoloration data, confirming the significant impact of both variables. The optimal catalyst for Allura Red degradation was 2%Zn/2%Fe/TiO2 calcined at 200 °C, while for Tartrazine Yellow, 6%Zn/2%Fe/TiO2 calcined at 300 °C was most effective. Both catalysts exhibited excellent stability, maintaining efficiency over four reuse cycles. These findings demonstrate the potential of Zn/Fe/TiO2 catalysts for sustainable wastewater treatment.