Despite being strong under compression, concrete is rather weak when subjected to tensile stress. Concrete has been reinforced with a variety of materials over time in order to resist tensile stresses. Among various types of fibers, polypropylene fiber, which is available in a range of sizes, is being used to strengthen concrete. The fiber also increases the concrete’s toughness, durability, and low permeability. Polypropylene fibers may be utilized in place of conventional reinforcement, according to a number of researchers. The aim of this study is to collect information from already carried out research on polypropylene fibers. Important characteristics of concrete, such as workability, compressive, tensile, and flexural strength, are reviewed. The review also explores cracking behavior and failure modes of polypropylene fiber reinforced concrete. Furthermore, durability aspects, such as water absorption, porosity, dry shrinkage, and microstructure study (scan electronic microscopy), were also reviewed. Results indicate that polypropylene fiber improved the mechanical strength and durability of concrete (particularly tensile capacity) but decreased the flowability of concrete. The optimum dose is important, as a higher dose adversely affects strength and durability due to a lack of flowability. Scanning electronic microscopy results indicate that the polypropylene fibers restrict the propagation of cracks, which improves the strength and durability of concrete. The review also indicates that shrinkage cracks are considerably reduced with the addition of polypropylene fibers. Finally, the review also provides future research guidelines for upcoming generations to further improve the performance of polypropylene fibers that reinforce concrete.

The low tensile capacity of concrete often results in brittle failure without any warning. One way to cope with this issue is to add fibers and essentially improve the tensile strength (TS) behavior of concrete and offset its undesirable brittle failure. In recent investigations, basalt fibers (BFs), as compared to a variety of other kinds of fiber, have attracted the attention of researchers. In that respect, BFs exhibit several benefits, such as excellent elastic properties, great strength, high elastic modulus, higher thermal stability, and decent chemical stability. Although many researchers have reported that BFs can be embedded in concrete to improve the tensile capacity, a more profound understanding of its contribution is still needed. However, the information is scattered and it is difficult for the reader to identify the benefits of BFs. Therefore, a detailed assessment is essential to summarize all relevant information and provide an easy path for the reader. This review (part Ⅰ) summarizes all the relevant information, including flow properties, strength properties, and failure modes. Results reveal that BFs can greatly enhance the strength properties and change the brittle nature of concrete to one of ductility. However, it unfavorably impacts the flowability of concrete. Furthermore, the optimal proportion is shown to be important as a higher dose can adversely affect the strength of concrete, due to a deficiency of flowability. The typical range of the ideal incorporation of BFs varies from 0.5 to 1.5%. Finally, the review also indicates the research gap for future research studies that must be cautiously explored before being used in the real world.

The creation of sustainable composites reinforced with natural fibers has recently drawn the interest of both industrial and academics. Basalt fiber (BF) stands out as the most intriguing among the natural fibers that may be utilized as reinforcement due to their characteristics. Numerous academics have conducted many tests on the strength, durability, temperature, and microstructure characteristics of concrete reinforced with BF and have found promising results. However, because the information is dispersed, readers find it problematic to assess the advantages of BF reinforced concrete, which limits its applications. Therefore, a condensed study that provides the reader with an easy route and summarizes all pertinent information is needed. The purpose of this paper (Part II) is to undertake a compressive assessment of basalt fiber reinforced concrete’s durability features. The results show that adding BF significantly increased concrete durability. The review also identifies a research deficiency that must be addressed before BF is used in practice.

The need for low-cost raw materials is driven by the fact that iron ore tailings, a prevalent kind of hazardous solid waste, have created major environmental issues. Although many studies have focused on using iron ore tailing (IOT) in concrete and have reported positive results, readers may find it difficult to accurately assess the behaviors of IOT in concrete due to the scattered nature of the information. Therefore, a comprehensive assessment of IOT in concrete is necessary. This paper thoroughly reviews the characteristics of concrete that contains IOT such as fresh properties, mechanical properties and durability at different age of curing. The outcome of this review indicates that by using IOT, concrete’s mechanical properties and durability improved, but its flowability decreased. Compressive strength of concrete with 20% substitution of IOT is 14% more than reference concrete. Furthermore, up to 40% substitution of IOT produces concrete that has sufficient flowability and compactability. Scan electronic microscopy results indicate a weak interfacial transition zone (ITZ). The optimum IOT dosage is important since a greater dose may decrease the strength properties and durability owing to a lack of fluidity. Depending on the physical and chemical composition of IOT, the average value of optimum percentages ranges from 30 to 40%. The assessment also recommends areas of unsolved research for future investigations.

Self-compacting concrete (SCC) uses a lot of natural resources, much like regular concrete, which results in unsustainable construction. Even though silica fume (SF) and other secondary cementitious materials are the subjects of a lot of studies, to determine the past, present, and future direction of research, information must first be reviewed. This paper compiles data on SSC with SF substations. Slump flow, slump T₅₀, L-box, and V-funnel tests were used to investigate fresh SCC properties, such as filling and passing capabilities. Mechanical properties were examined using compressive, tensile, and flexure strength, while the durability characteristics of SCC were examined through water absorption, porosity, sorptivity, and chloride resistance. The internal structure of SCC, with and without SF, is reviewed through scan electronic microscopy (SEM). The results indicate that SF lacked the filling and passing ability of SCC, but is still within the limit defined by the technical specification for SCC. However, the study suggests a larger dosage of plasticizer for a higher dose of SF. Improvements in SCC’s strength and durability were also seen; however, greater doses had a negative impact on these attributes due to an absence of flowability. Researchers recommended the ideal SF dosage ranges from 10 to 15% by volume of cement. The assessment also reveals research gaps that need to be addressed.