Muwaffaq Awadh Alqurashi

Dr. Muwaffaq Awadh Alqurashi

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 November 2021 in Water
Verified
Journal Article
Open access
PDF file
Muhammad Yousuf Jat BalochMuhammad Yousuf Jat Baloch
Muhammad Yousuf Jat Baloch
WZWenjing Zhang
Wenjing Zhang
JCJuanfen Chai
Juanfen Chai
SLShuxin Li
Shuxin Li
MAMuwaffaq Awadh Alqurashi
Muwaffaq Awadh Alqurashi
EHEnas Hussein
Enas Hussein
For shallow groundwater, hydrogeochemical processes and quality assessment must be addressed because shallow groundwater is freely available in many parts of the globe. Due to recent anthropogenic activities and environmental changes in Sakrand, Sindh, Pakistan, the groundwater is extremely vulnerable. To provide safe drinking and agricultural water, hydrogeochemical analysis is required. Ninety-five groundwater samples were analyzed using agricultural and drinking indices to determine the hydrogeochemical parameters using multivariate analysis such as Pearson correlations, principal component cluster analysis, as well as Piper diagrams and Gibbs plot for drinking and agricultural indices. An abundance of ions was observed through the statistical summary; however, cations and anions were recorded in the orders Na+ > Ca2+ > Mg2+ > K+ and HCO3− > Cl− > SO42− > NO3− > F−. The hydrogeochemical process used to quantify the major reactions occurring in the groundwater system showed rock dominance; the Piper diagrams evaluated the water type. A mixed pattern of calcium, magnesium, and chloride ions (Ca2+−Mg2+−Cl− type) was observed. Additionally, the ion exchange method showed an excess of bicarbonate ions due to carbonic acid weathering. The water quality index (WQI) resulted 32.6% of groundwater being unsuitable for human consumption; however, the United States Salinity Laboratory (USSL) diagram showed 60% of samples were unsuitable for irrigation due to high salinity and the Wilcox diagram depicted 5% of samples lying in the unsuitable region. Most of the water samples were suitable for drinking; only a few samples were unsafe for drinking purposes for children due to the high hazard index.

11 August 2022 in Materials
Verified
Journal Article
Open access
PDF file
Jawad AhmadJawad Ahmad
Jawad Ahmad
ZZZhiguang Zhou
Zhiguang Zhou
AMAli Majdi
Ali Majdi
MAMuwaffaq Awadh Alqurashi
Muwaffaq Awadh Alqurashi
Ahmed Mohamed HassanAhmed Mohamed Hassan
Ahmed Mohamed Hassan
Utilizing scrap tire rubber by incorporating it into concrete is a valuable option. Many researchers are interested in using rubber tire waste in concrete. The possible uses of rubber tires in concrete, however, are dispersed and unclear. Therefore, a compressive analysis is necessary to identify the benefits and drawbacks of rubber tires for concrete performance. For examination, the important areas of concrete freshness, durability, and strength properties were considered. Additionally, several treatments and a microstructure investigation were included. Although it has much promise, there are certain obstacles that prevent it from being used as an aggregate in large numbers, such as the rubber’s weak structural strength and poor binding performance with the cement matrix. Rubber, however, exhibits mechanical strength comparable to reference concrete up to 20%. The evaluation also emphasizes the need for new research to advance rubberized concrete for future generations.
1

8 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
Mohamed Moafak ArbiliMohamed Moafak Arbili
Mohamed Moafak Arbili
MAMuwaffaq Awadh Alqurashi
Muwaffaq Awadh Alqurashi
AMAli Majdi
Ali Majdi
Jawad AhmadJawad Ahmad
Jawad Ahmad
Ahmed Mohamed HassanAhmed Mohamed Hassan
Ahmed Mohamed Hassan
The need for low-cost raw materials is driven by the fact that iron ore tailings, a prevalent kind of hazardous solid waste, have created major environmental issues. Although many studies have focused on using iron ore tailing (IOT) in concrete and have reported positive results, readers may find it difficult to accurately assess the behaviors of IOT in concrete due to the scattered nature of the information. Therefore, a comprehensive assessment of IOT in concrete is necessary. This paper thoroughly reviews the characteristics of concrete that contains IOT such as fresh properties, mechanical properties and durability at different age of curing. The outcome of this review indicates that by using IOT, concrete’s mechanical properties and durability improved, but its flowability decreased. Compressive strength of concrete with 20% substitution of IOT is 14% more than reference concrete. Furthermore, up to 40% substitution of IOT produces concrete that has sufficient flowability and compactability. Scan electronic microscopy results indicate a weak interfacial transition zone (ITZ). The optimum IOT dosage is important since a greater dose may decrease the strength properties and durability owing to a lack of fluidity. Depending on the physical and chemical composition of IOT, the average value of optimum percentages ranges from 30 to 40%. The assessment also recommends areas of unsolved research for future investigations.
1

7 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
Jawad AhmadJawad Ahmad
Jawad Ahmad
RMRebeca Martínez-García
Rebeca Martínez-García
Maciej SzelągMaciej Szeląg
Maciej Szeląg
JDJesús De-Prado-Gil
Jesús De-Prado-Gil
RMRiadh Marzouki
Riadh Marzouki
EHEnas Hussein
Enas Hussein
Recycled aggregate is a good option to be used in concrete production as a coarse aggregate that results in environmental benefits as well as sustainable development. However, recycled aggregate causes a reduction in the mechanical and durability performance of concrete. On the other hand, the removal of industrial waste would be considerably decreased if it could be incorporated into concrete production. One of these possibilities is the substitution of the cement by slag, which enhances the concrete poor properties of recycled aggregate concrete as well as provides a decrease in cement consumption, reducing carbon dioxide production, while resolving a waste management challenge. Furthermore, steel fiber was also added to enhance the tensile capacity of recycled aggregate concrete. The main goal of this study was to investigate the characteristics of concrete using ground granulated blast-furnace slag (GGBS) as a binding material on recycled aggregate fibers reinforced concrete (RAFRC). Mechanical performance was assessed through compressive strength and split tensile strength, while durability aspects were studied through water absorption, acid resistance, and dry shrinkage. The results detected from the different experiments depict that, at an optimum dose (40% RCA, 20%GGBS, and 2.0%), compressive and split tensile strength were 39% and 120% more than the reference concrete, respectively. Furthermore, acid resistance at the optimum dose was 36% more than the reference concrete. Furthermore, decreased water absorption and dry shrinkage cracks were observed with the substitution of GGBS into RAFRC.

16 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
RWRana Muhammad Waqas
Rana Muhammad Waqas
FBFaheem Butt
Faheem Butt
ADAamar Danish
Aamar Danish
MAMuwaffaq Awadh Alqurashi
Muwaffaq Awadh Alqurashi
Mohammad MosaberpanahMohammad Mosaberpanah
Mohammad Mosaberpanah
EHEnas Hussein
Enas Hussein
In this study, bentonite (a naturally occurring pozzolana) was incorporated as a partial replacement (up to 20%) for high-calcium fly ash (HCFA)-based geopolymeric natural aggregate concrete (GNAC) and geopolymeric recycled aggregate concrete (GRAC). The mechanical (compressive strength and splitting tensile strength), durability (chloride migration coefficient, water absorption, and acid attack resistance), and rheological properties (slump test, fresh density, and workability) were investigated. The results revealed that incorporation of bentonite (10 wt % with ordinary Portland cement) showed appreciable improvement in the strength and durability of both the GNAC and GRAC, though its effect is more significant for GRAC than the GNAC.

31 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
FAFarhan Ahmad
Farhan Ahmad
Arshad JamalArshad Jamal
Arshad Jamal
MIMudassir Iqbal
Mudassir Iqbal
MAMuwaffaq Awadh Alqurashi
Muwaffaq Awadh Alqurashi
Meshal AlmoshaogehMeshal Almoshaogeh
Meshal Almoshaogeh
EHEnas Hussein
Enas Hussein
Nano graphite platelets (NGPs) belong to the carbon family and have a huge impact on the construction industry. NGPs are used as multi-functional fillers and have the potential to develop reinforcing within cementitious composites. In this paper, NGPs were incorporated in cementitious composites to investigate the effects of NGPs on the fresh, mechanical, durability, and microstructural properties of concrete. Five mixes were prepared with intrusion of NGPs (0%, 0.5%, 1.5%, 3%, and 5% by weight of cement). The properties studied involved workability, air content, hardened density, compressive strength, tensile strength, flexural strength, sorptivity, ultrasonic pulse velocity (UPV), water absorption, and external sulfate attack. The workability and percent air content decrease by 22.5% and 33.8%, respectively, for concrete with 5% NGPs compared to the control mix. The specimens containing 5% of NGPs revealed the hardened density, compressive, tensile, and flexural strength to increase by 11.4%, 38.5%, 31.6%, and 44.34%, respectively, compared to the control mix. The results revealed that the incorporation of 5%NGPs in cementitious composites reduces the sorptivity and water absorption by 32.2% and 73.9%, respectively, whereas, it increases the UPV value by 7.5% compared to the control mix. Furthermore, the incorporation of NGPs provided better resistance against external sulfate attacks. SEM–EDX spectroscopy was carried out to investigate its microstructural analysis.