JungGoo Park

Dr. JungGoo Park

Samsung Heavy Industries
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 October 2025 in Metals
Verified
Journal Article
Open access
PDF file
JPJungGoo Park
JungGoo Park
GAGyubaek AN
Gyubaek AN
JPJeongung Park
Jeongung Park
Seong DaeheeSeong Daehee
Seong Daehee
WJWonJun Jo
WonJun Jo
This study investigates the effect of hydrogen embrittlement on the fracture toughness of 9% Ni steel and STS 316L stainless steel under cryogenic conditions ranging from −80 °C to −253 °C. Hydrogen charging was performed using electrochemical methods, and hydrogen uptake was quantitatively analyzed using thermal desorption spectroscopy (TDS). Fracture toughness was evaluated using crack tip opening displacement (CTOD) testing per ISO 12135, both without hydrogen (WO-H) and with hydrogen (W-H). The results showed a gradual decrease in CTOD values with decreasing temperature in both steels under hydrogen-free conditions, with ductile fracture maintained even at −253 °C. In contrast, hydrogen-charged specimens exhibited significant toughness degradation at intermediate subzero temperatures (−80 °C to −130 °C), particularly in 9% Ni steel due to its BCC crystal structure. However, at −160 °C and below, the effect of hydrogen embrittlement was suppressed mainly owing to the reduced hydrogen diffusivity. Scanning electron microscopy (SEM) analysis confirmed the transition from ductile to brittle fracture with decreasing temperature and hydrogen influences. At −253 °C, fully brittle fracture surfaces were observed in all specimens, confirming that at ultra-low temperatures, fracture behavior is dominated by temperature effects rather than hydrogen. These findings identify a practical temperature limit (approximately −160 °C) below which hydrogen embrittlement becomes negligible, providing critical insights for the design and application of structural materials in hydrogen cryogenic environments.

31 August 2024 in Journal of Welding and Joining
Verified
Journal Article
Open access
PDF file
Seong DaeheeSeong Daehee
Seong Daehee
WJWonJun Jo
WonJun Jo
JRJisun Roh
Jisun Roh
JPJungGoo Park
JungGoo Park
JPJeongung Park
Jeongung Park
GAGyubaek AN
Gyubaek AN
In this study, fracture toughness with the base metal of 9% Ni steel, a cryogenic steel, was evaluated under conditions without hydrogen charging (WO-H) and with hydrogen charging (W-H). Hydrogen charging was performed using an electrochemical cathodic charging method in a electrolyte of 3% NaCl + 0.3% NH4SCN at 19℃ with a current density of 50 A/m². Fracture toughness was assessed at -80℃, -100℃, -130℃, and -160℃ using CTOD (Crack Tip Opening Displacement) tests. The results for WO-H indicated a decrease in fracture toughness values with decreasing temperature, while the results for W-H showed an increase in fracture toughness values as the temperature decreased. In addition, the fracture surfaces and fracture toughness of WO-H and W-H became increasingly similar as the temperature decreased, as observed through scanning electron microscopy (SEM). At -80℃, there was a significant difference in fracture toughness between the WO-H and W-H conditions. WO-H was influenced only by the low temperature, whereas W-H was affected by both low temperature and hydrogen, showing combined effects that led to a decrease in fracture toughness due to hydrogen embrittlement. However, at -160℃, the fracture toughness values for both WO-H and W-H conditions were nearly identical. This suggests that the temperature effect on fracture toughness reduction is greater than hydrogen embrittlement at very low temperatures.

30 April 2018 in Journal of the Society of Naval Architects of Korea
Verified
Journal Article
Closed access
JPJungGoo Park
JungGoo Park
JWJongHun Woo
JongHun Woo
In order to secure manufacturing competitiveness of offshore plants, piping process is one of the most important processes. This study is about the design of management system for piping materials manufacturing of the offshore plant. As a result of the study, we analyzed the system and algorithms needed for the processing of piping material products and designed the structure of the entire management system. We conducted a process analysis of the design, manufacturing and installation processes. And also we proposed a system structure to improve the various problems that have come out. We also proposed an algorithm to determine the delivery order of the pipe spools, and proposed a raw material management system for the manufacturing of the pipe spools. And we designed a manufacturing process management system to manage the risk of pipe materials delivery. And finally we proposed a data structure for the installation process management system. The data structures and algorithms were actually implemented, and applied the actual process data to verify the effect of the system.

30 April 2022 in Journal of Welding and Joining
Verified
Journal Article
Open access
PDF file
SRS. R. Rajesh
S. R. Rajesh
JYJinSun Yoo
JinSun Yoo
JPJungGoo Park
JungGoo Park
DCDooJin Choi
DooJin Choi
Overlaying of Inconel on carbon steel base material is widely used in offshore and shipbuilding. The prediction of the overlay related deformation is important to accurately carry out this work with minimum loss and maximum profit. So, in this research, a detailed experimental study on the variation of the weld deposit and the HAZ area while overlay FCAW welding with carbon steel wire as well as Inconel wire on carbon steel plate was carried out and finally, with Inconel Strip to observe the material related and heat input related factor associated with overlay welding. Using this modified heat input and material related values as scale factor is applied to (Strain as Direct Boundary condition) SDB method which is presently applied for welding deformation analysis of large ship block in our shipyard. Based on this research outcome, the overlay welding related deformation was accurately predicted. By predicting the deformation accurately, optimum thickness (always above design thickness) of overlay could be applied and thus reduce the grinding related man-hour to a great extend in this process.

31 August 2023 in Journal of Welding and Joining
Verified
Journal Article
Open access
PDF file
SASang-Hyun Ahn
Sang-Hyun Ahn
JBJun Sun Bae
Jun Sun Bae
DCDae-Won Cho
Dae-Won Cho
DKDae-Hwan Kim
Dae-Hwan Kim
SBSeung-Hoon Bae
Seung-Hoon Bae
DCDoo Jin Choi
Doo Jin Choi
In gas metal arc welding, the molten pool is affected by gravity and this affects welding phenomena. This study investigated the changes in bead shape and metal transfer mode caused by the molten-pool behavior. We conducted gas metal arc welding with various welding positions. Images from high-speed camera and signals from current and voltage sensors were used to determine the differences with welding positions. Bead shapes were quantified through transverse cross-sectional bead images and image processing. Molten-pool images from the camera were analyzed through the molten-pool length and distance from the wire position. These were used to explain the differences between transverse and longitudinal cross-sectional bead images with welding positions. Changes in metal transfer based on current and voltage signals were investigated. To determine the exact change in metal transfer, the number of short-circuit transfers and spray transfers within the same time was captured by the welding position camera.

28 February 2024 in Journal of Welding and Joining
Verified
Journal Article
Open access
PDF file
JRJi-Sun Roh
Ji-Sun Roh
MYMyung Su Yi
Myung Su Yi
JPJungGoo Park
JungGoo Park
MKMyung Hyun Kim
Myung Hyun Kim
Seam pipes are easier to manufacture and cheaper than seamless pipes, and are widely used in the manufacture of pipe spools for marine plant facilities. The manufacturing and assembly of seam pipes involve welding and cutting. The localized heating and cooling that occur during these processes may change the existing residual stress and cause deformation. Uncontrolled deformation can accumulate as assembly errors at the next step, potentially delaying the entire process and causing economic losses. Therefore, characteristics of residual stress redistribution caused by cutting and girth welding of seam pipes need to be studied further. In this study, we performed thermo-mechanical analysis of the manufacturing, cutting, and girth welding processes of seam pipes using the commercial finite element analysis (FEA) software MSC Marc and analyzed the characteristics of residual stress. Furthermore, we measured the residual stress in each process using the hole drilling method, analyzed the characteristics of redistributed residual stress, and ensured reliability. Based on the results of FEA and measured residual stress redistribution, we can provide a basis for reasonable mitigation when performing structural integrity evaluation if there is a defect in the weld of the pipe.