Existing motor pattern assessment methods, such as digital cameras and optoelectronic systems, suffer from object obstruction and require complex setups. To overcome these drawbacks, this paper presents a novel approach for biomechanical evaluation of newborn motor skills development. Multi-sensor measurement system comprising pressure mattress and IMUs fixed on trunk and arms is proposed and used as alternative to existing methods. Observed advantages seem appealing for the focused field and in general. Combined use of pressure distribution data and kinematic information is important also for posture assessment, ulcer prevention, and non-invasive sleep pattern analysis of adults.

The paper presents a comprehensive overview of recent advancements in power electronics and electric machine design, focusing on novel topologies, semiconductor technologies, and integrated design techniques for electric drives. New drive topologies are gradually moving from the research phase to practical application, aiming to increase the rated power, efficiency, and reliability of electric drives. Specifically, these topologies can be categorized into series, which focus on increasing the operating voltage; parallel, which aim at enhancing the operating current and adding redundancy; and multiphase, known for offering significant benefits such as improved fault tolerance, higher torque generation, the possibility of synthetic loading, and diverse winding layout options. Emerging wide bandgap semiconductors, such as silicon carbide and gallium nitride, allow for operation at higher frequencies and lower power losses, enabling further drive integration. In terms of design practices, higher computational power, supported by advanced software, enables simulation and analysis in multiple domains (thermal, mechanical, electromagnetic) using multiphysics co-simulation, as well as multi-objective optimization concepts to achieve rapid prototyping of optimized drive systems. All the approaches described are important steps towards further improving electric drives for numerous applications in industry, consumer electronics, and transportation.

The paper analyzes the influence of the number of rotor bars on the stator current spectral content in a three-phase cage induction motor fed by a pulse-width modulated (PWM) inverter. It is shown that each of the higher-order time harmonics in the supply voltage produces space harmonics in a rotating magnetic flux density wave, which results in induced rotor slot harmonics (RSHs) in the stator current spectrum. The conditions for the existence of these space harmonics are identical to those applying to a mains-fed motor. In other words, the number of rotor bars of a mains-fed motor yielding an RSH-free stator current spectrum produces the same stator current spectrum even in case the motor is inverter-fed. Additionally, to minimize the adverse effects of RSHs in the stator current spectrum, one must consider not only the number of rotor bars, but also its relationship with the frequency modulation ratio of the PWM inverter. Analytical predictions are presented to illustrate these results supported both by numerical simulations of the induction motor modelled through the winding function theory and experimentally taking the case a two-pole cage induction machine as a case study.