Siwei Sun

Ms. Siwei Sun

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 November 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
XMXiangxu Meng
Xiangxu Meng
SSSiwei Sun
Siwei Sun
XYXuetao Yan
Xuetao Yan
FLFengman Liu
Fengman Liu
LCLiqiang Cao
Liqiang Cao
Yu SUNYu SUN
Yu SUN
Six degree-of-freedom (6-DOF) posture measurement is an important academic research topic which has been broadly applied in many fields. As a high-speed photoelectronic sensor with ultra-high resolution and precision, position sensitive detector (PSD) has shown to be one of the most competitive candidates in 6-DOF measurement. This review presents the research progress of PSD-based 6-DOF posture measurement systems in the field of large-scale equipment assembly, ultra-precision manufacturing and other emerging areas. A total of six methods for implementing 6-DOF measurement are summarized and their advantages and limitations are discussed. Meanwhile, the paper illustrates challenges, potential solutions and future development trends.

16 March 2021 in Photonics
Verified
Journal Article
Open access
PDF file
SSSiwei Sun
Siwei Sun
YCYing Chen
Ying Chen
Yu SUNYu SUN
Yu SUN
FLFengman Liu
Fengman Liu
LCLiqiang Cao
Liqiang Cao
Fiber-to-chip optical interconnects is a big challenge in silicon photonics application scenarios such as data centers and optical transmission systems. An edge coupler, compared to optical grating, is appealing to in the application of silicon photonics due to the high coupling efficiency between standard optical fibers (SMF-28) and the sub-micron silicon wire waveguides. In this work, we proposed a novel fiber–chip edge coupler approach with a large mode size for silicon photonic wire waveguides. The edge coupler consists of a multiple structure which was fulfilled by multiple silicon nitride layers embedded in SiO2 upper cladding, curved waveguides and two adiabatic spot size converter (SSC) sections. The multiple structure can allow light directly coupling from large mode size fiber-to-chip coupler, and then the curved waveguides and SSCs transmit the evanescent field to a 220 nm-thick silicon wire waveguide based on the silicon-on-insulator (SOI) platform. The edge coupler, designed for a standard SMF-28 fiber with 8.2 μm mode field diameter (MFD) at a wavelength of 1550 nm, exhibits a mode overlap efficiency exceeding 95% at the chip facet and the overall coupling exceeding 90%. The proposed edge coupler is fully compatible with standard microfabrication processes.

5 July 2022 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
Qi ZhengQi Zheng
Qi Zheng
PYPeng Yang
Peng Yang
Haiyun XueHaiyun Xue
Haiyun Xue
HHHuimin He
Huimin He
RCRui Cao
Rui Cao
PSPeng Sun
Peng Sun
3D integration photonic interposer is becoming popular in the field of co-packaging optics (CPO). In this paper, we integrate the edge coupler and through silicon via (TSV) into the silicon interposer. Different high-frequency transmission lines are designed, analyzed and simulated. The measured results and the simulation have a good correspondence. The high frequency transmission lines, which consist of 10 μm × 100 μm TSVs and two redistribution layer (RDL) lines of 100 μm on the top layer and one 100 μm RDL line on the bottom layer, shows perfect insertion loss less than 0.35 dB @67 GHz. In addition, the 56GBaud (112Gbps) eye diagram is tested and shows excellent transmission quality. Edge couplers are designed and fabricated by packaging process. The coupling loss of coupler is less than 1.7 dB/facet. The 3D optical package module based on the active optical interposer has also been realized and verified.

23 May 2017 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
SSSiwei Sun
Siwei Sun
SLSong Liang
Song Liang
JXJunjie Xu
Junjie Xu
LZLimeng Zhang
Limeng Zhang
LGLu Guo
Lu Guo
WWWei Wang
Wei Wang
The design and fabrication of an evanescently coupled waveguide InGaAs unitraveling-carrier photodiode (PD) are presented. Through doping the InGaAs absorption layer gradedly, a large built-in electric field can be obtained. As a result, a 4-μm-wide 15-μm-long PD has a bandwidth larger than 21 GHz at zero bias. Passive input waveguide is integrated monolithically with the PD by a simple process, which eases the integration of PD with other optical components.

25 April 2024 in Photonics
Verified
Journal Article
Open access
PDF file
PYPeng Yang
Peng Yang
SSSiwei Sun
Siwei Sun
YZYuqiang Zhang
Yuqiang Zhang
RCRui Cao
Rui Cao
HHHuimin He
Huimin He
FLFengman Liu
Fengman Liu
Recently, lumped Mach-Zehnder Modulators (MZMs) have received renewed attention due to their potential for low power consumption and compact size. However, the practicality of lumped MZMs with conventional lumped electrodes (C−LEs) is limited by their lower electro−optical (EO) bandwidth. The reduction in EO bandwidth results from the inherent trade−off between EO bandwidth and half−wave voltage length product (VπL) within the C−LE architecture. This paper proposes a thin−film lithium niobate (TFLN)−based lumped MZM with capacitively−loaded lumped electrodes (CL−LEs). The purely linear EO effect of the LN eliminates the parasitic capacitance in the doped PN junction and enhances the EO bandwidth. Furthermore, the CL−LE structure can break the limitation between EO bandwidth and VπL inherent in the C−LE design. Simulations show the proposed device achieves a high EO bandwidth of 32.4 GHz and a low VπL of 1.15 V·cm. Due to the reduced capacitance and lower VπL, the power consumption of the device is as low as 0.1 pJ/bit. Simulation results indicate that the open−eye diagrams are achieved at 64 Gb/s for 1.5 mm TFLN lumped MZM, with an ER of 2.97 dB. Consequently, the proposed device architecture substantially enhances the performance of lumped MZMs, showing promise for application in short−reach optical interconnects within data centers.

12 April 2017 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
JXJunjie Xu
Junjie Xu
SLSong Liang
Song Liang
SLSongtao Liu
Songtao Liu
LQLijun Qiao
Lijun Qiao
SSSiwei Sun
Siwei Sun
HZHongliang Zhu
Hongliang Zhu
We report a novel passively mode-locked quantum-well laser, which have an asymmetric colliding pulse mode-locked structure. The saturable absorber (SA) multi-quantum wells (MQWs) of the laser have bandgap, which is gradually varied along the ridge direction realized by selective area growth technique, forming a broadband absorber. As a result, light pulses are obtained at a repetition frequency of 226 GHz with a minimum pulse width of 605 fs under an appropriate current bias. Because of the continuous variation of the SA MQW bandgap, the SA absorption peak covers a wide range of wavelength, which makes the device more immune to SA bandgap change resulted from SA reverse bias or light absorption-induced heating of the SA, compared with traditional MQW mode-locked lasers.