In this paper, we report the successful demonstration of bright InGaN-based microLED devices emitting in the red spectral regime grown by metal organic chemical vapor deposition (MOCVD) on c-plane semi-relaxed InGaN substrates on sapphire. Through application of an InGaN/GaN base layer scheme to ameliorate high defect density and maintain appropriate lattice constant throughout the growth, high-In quantum wells (QWs) can be grown with improved crystal quality. Improvement to the design of the growth scheme also yields higher power output resulting in an increase to the external quantum efficiency (EQE). Combined, these two improvements allow for an 80 × 80 m microLED device emitting at 609 nm to achieve 0.83% EQE. Furthermore, the true In content of the QW is measured using atomic probe tomography (APT) to confirm the improved In incorporation during high temperature active region growth. These developments represent advancement toward the realization of bright, highly efficient red III-nitride LEDs to be used in RGB applications under one material system.
A sidewall treatment process is proposed to recover the external quantum efficiency (EQE) loss in AlGaInP micro-LEDs (μLEDs). The proposed sidewall treatment consists of thermal annealing, ammonium sulfide chemical treatment, and sidewall passivation using atomic-layer deposition (ALD). The devices with sidewall treatment show improved optical power of more than 500% and 190% at 5 and 100 A cm−2, respectively, compared to devices with ALD sidewall passivation. The reduction in EQE was 20% when shrinking the device dimensions from 100 × 100 to 20 × 20 μm2. This work reveals that AlGaInP μLEDs can be energy efficient by employing proper sidewall treatments.
In this study, III-nitride red micro-light-emitting diodes (µLEDs) with ultralow forward voltage are demonstrated on a strain relaxed template. The forward voltage ranges between 2.00 V and 2.05 V at 20 A/cm2 for device dimensions from 5 × 5 to 100 × 100 µm2. The µLEDs emit at 692 nm at 5 A/cm2 and 637 nm at 100 A/cm2, corresponding to a blueshift of 55 nm due to the screening of the internal electric field in the quantum wells. The maximum external quantum efficiency and wall-plug efficiency of µLEDs are 0.31% and 0.21%, respectively. This suggests that efficient III-nitride red µLEDs can be realized with further material optimizations.
17 November 2020 in Semiconductor Science and Technology
The MOCVD growth of InGaN:Si base layers on a semi-relaxed InGaN substrate, where growth is generally difficult due to the presence of V-pits, is examined. These V-pits can propagate through the crystal, causing severe morphological degradation and significantly reducing material quality for device use. Such V-pits may also be a source of leakage current if they extend from the substrate through p-n junction. A wide range of InGaN growth conditions and their impact on V-pit formation and density are investigated. The use of thin GaN interlayers, carrier gas selection, and V/III ratio are found play a critical role in managing V-pit quantity and size. Finally, high temperature GaN interlayers are implemented, fully eliminating V-pit formation in 1200 nm thick InGaN base layers grown coherently on semi-relaxed InGaN substrates.
We examine full InGaN-based microLEDs on c-plane semi-relaxed InGaN substrates grown by metal organic chemical vapor deposition (MOCVD) that operate across a wide range of emission wavelengths covering nearly the entire visible spectrum. By employing a periodic InGaN base layer structure with high temperature (HT) GaN interlayers on these semi-relaxed substrates, we demonstrate robust LED devices. A broad range of emission wavelengths ranging from cyan to deep red are realized, leveraging the indium incorporation benefit of the relaxed InGaN substrate with an enlarged lattice parameter. Since a broad range of emission wavelengths can be realized, this base layer scheme allows the tailoring of the emission wavelength to a particular application, including the possibility for nitride LEDs to emit over the entire visible light spectrum. The range of emission possibilities from blue to red makes the relaxed substrate and periodic base layer scheme an attractive platform to unify the visible emission spectra under one singular material system using III-Nitride MOCVD.