In this work, polymer nanocomposite films based on poly(L-lactic acid) (PLLA) were reinforced with mesoporous silica nanoparticles, mesoporous cellular foam (MCF) and Santa Barbara amorphous-15 (SBA). PLLA is a biobased aliphatic polyester, that possesses excellent thermomechanical properties, and has already been commercialized for packaging applications. The aim was to utilize nanoparticles that have already been established as nanocarriers to enhance the mechanical and thermal properties of PLLA. Since the introduction of antibacterial properties has become an emerging trend in packaging applications, to achieve an effective antimicrobial activity, micro/nano 3D micropillars decorated with cone- and needle-shaped nanostructures were implemented on the surface of the films by means of thermal nanoimprint lithography (t-NIL), a novel and feasible fabrication technique with multiple industrial applications. The materials were characterized regarding their composition and crystallinity using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD), respectively, and their thermal properties using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Their mechanical properties were examined by the nanoindentation technique, while the films’ antimicrobial activity against the bacteria Escherichia coli and Staphylococcus aureus strains was tested in vitro. The results demonstrated the successful production of nanocomposite PLLA films, which exhibited improved mechanical and thermal properties compared to the pristine material, as well as notable antibacterial activity, setting new groundwork for the potential development of biobased smart packaging materials.
Optics manufacturing technology is predicted to play a major role in the future production of integrated photonic circuits. One of the major drawbacks in the realization of photonic circuits is the damage of optical materials by intense laser pulses. Here, we report on the preparation of a series of organic–inorganic hybrid photoresists that exhibit enhanced laser‐induced damage threshold. These photoresists showed to be candidates for the fabrication of micro‐optical elements (MOEs) using three‐dimensional multiphoton lithography. Moreover, they demonstrate pattern ability by nanoimprint lithography, making them suitable for future mass production of MOEs.
Current transdermal drug delivery technologies, like patches and ointments, effectively deliver low molecular weight drugs through the skin. However, delivering larger, hydrophilic drugs and macromolecules remains a challenge. In the present study, we developed novel transdermal nanoneedle patches containing levofloxacin-loaded modified chitosan nanoparticles. Chitosan was chemically modified with transcutol in three ratios (1/1, 1/2, 1/3, w/w), and the optimum ratio was used for nanoparticle fabrication via the ionic gelation method. The successful modification was confirmed using ATR-FTIR spectroscopy, while DLS results revealed that only the 1/3 ratio afforded suitably sized particles of 220 nm. After drug encapsulation, the particle size increased to 435 nm, and the final formulations were examined via XRD and an in vitro dissolution test, which suggested that the nanoparticles reach 60% release in a monophasic pattern at 380 h. We then prepared transdermal patches with pyramidal geometry nanoneedles using different poly(lactic acid)/poly(ethylene adipate) (PLA/PEAd) polymer blends of varying ratios, which were characterized in terms of morphology and mechanical compressive strength. The 90/10 blend exhibited the best mechanical properties and was selected for further testing. Ex vivo permeation studies proved that the nanoneedle patches containing drug-loaded nanoparticles achieved the highest levofloxacin permeation (88.1%).
5 March 2022 in Journal of Sol-Gel Science and Technology
Radiative cooling is a passive cooling technology that could potentially address critical sustainability challenges by improving energy efficiency across different applications, including building materials, coatings, electronics, and outdoor devices. Photonic radiative coolers are a discrete category that utilizes photonic structures to optimize the emission properties of the material in the atmospheric transparency window (ATW) regime (8-13 μm). Due to their efficiency and adaptive nature, photonic radiative coolers offer a promising avenue as an adaptable cooling technology. However, a major challenge in transitioning this technology from laboratory to practical use remains. To address this barrier, large area, scalable and low-cost methods and materials need to be implemented. In this study, we demonstrate the fabrication of a transparent microstructured polymer-based radiative cooling (MPRC) film using nanoimprint lithography with a hybrid organic-inorganic UV-curable resist, namely, Ormocomp. We report the optical properties of Ormocomp within the atmospheric transparency window, which had not been previously characterized and utilize them to reveal the underlying mechanisms leading to emissivity enhancement. The MPRC film has over 90% transmission in the visible-NIR wavelengths and provides an─above ambient─cooling effect of -3 °C compared to bare Si reference sample under direct sunlight even though the solar absorptivity of silicon is lower. Our suggested design and fabrication approach is suitable for applications that need optical transparency or can be paired with reflective substrates to further enhance cooling performance, offering a practical and scalable radiative cooling solution.
Ex-vivo histology is time consuming, subjective, and invasive. We discuss how, by coupling non-linear excitation, structured illumination and implantable micro-optics, we can obtain in-vivo tissue histology.