Christian Schäfer

Mr. Christian Schäfer


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 October 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YCYesenia Haydee Sauni Camposano
Yesenia Haydee Sauni Camposano
SRSascha Sebastian Riegler
Sascha Sebastian Riegler
KJKonrad Jaekel
Konrad Jaekel
JSJörg Schmauch
Jörg Schmauch
Christoph PaulyChristoph Pauly
Christoph Pauly
PSPeter Schaaf
Peter Schaaf
Reactive multilayer systems represent an innovative approach for potential usage in chip joining applications. As there are several factors governing the energy release rate and the stored chemical energy, the impact of the morphology and the microstructure on the reaction behavior is of great interest. In the current work, 3D reactive microstructures with nanoscale Al/Ni multilayers were produced by alternating deposition of pure Ni and Al films onto nanostructured Si substrates by magnetron sputtering. In order to elucidate the influence of this 3D morphology on the phase transformation process, the microstructure and the morphology of this system were characterized and compared with a flat reactive multilayer system on a flat Si wafer. The characterization of both systems was carried out before and after a rapid thermal annealing treatment by using scanning and transmission electron microscopy of the cross sections, selected area diffraction analysis, and differential scanning calorimetry. The bent shape of multilayers caused by the complex topography of silicon needles of the nanostructured substrate was found to favor the atomic diffusion at the early stage of phase transformation and the formation of two intermetallic phases Al0.42Ni0.58 and AlNi3, unlike the flat multilayers that formed a single phase AlNi after reaction.


Verified
Journal Article
Open access
PDF file
Bruno AldereteBruno Alderete
Bruno Alderete
CSChristian Schäfer
Christian Schäfer
UNU. Pranav Nayak
U. Pranav Nayak
Frank MücklichFrank Mücklich
Frank Mücklich
Sebastian SuarezSebastian Suarez
Sebastian Suarez
Switching elements are crucial components in electrical and electronic systems that undergo severe degradation due to the electrical arc that is generated during breaking. Understanding the behavior of the electrical arc and modifying its characteristics via proper electrode design can significantly improve durability while also promoting optimal performance, reliability, and safety in circuit breakers. This work evaluates the feasibility of carbon nanotube (CNT)-reinforced silver and copper metal matrix composites (MMCs) as switching electrodes and the influence of CNT concentration on the characteristics of the arcs generated. Accordingly, three different concentrations per MMC were manufactured via powder metallurgy. The MMCs and reference materials were subjected to a single break operation and the electrical arcs generated using 100 W and 200 W resistive loads were analyzed. The proposed MMCs displayed promising results for application in low-voltage switches. The addition of CNTs improved performance by maintaining the arc’s energy in the silver MMCs and reducing the arc’s energy in the copper MMCs. Moreover, a CNT concentration of at least 2 wt.% is required to prevent unstable arcs in both metallic matrices. Increased CNT content further promotes the splitting of the electrical arc due to a more complex phase distribution, thereby reducing the arc’s spatial energy density.

11 January 2023 in Coatings
Verified
Journal Article
Open access
PDF file
VOVincent Ott
Vincent Ott
CSChristian Schäfer
Christian Schäfer
Sebastian SuarezSebastian Suarez
Sebastian Suarez
Karsten WollKarsten Woll
Karsten Woll
Frank MücklichFrank Mücklich
Frank Mücklich
Michael StueberMichael Stueber
Michael Stueber
In this study, we report on phase formation and microstructure evolution in multiscale magnetron sputtered Ru/Al multilayers upon thermal annealing in vacuum at slow heating rates of 10 K/min. By specifically adjusting the microstructure and design of the as-deposited multilayers, the formation of certain desired phases can be tuned. We demonstrate that the synthesis of single phase RuAl thin films is possible in a very controlled manner in a solid state only via thermal activation without initiating the self-propagating exothermic reactions of Ru/Al multilayers. To investigate phase formation sequences and the resulting microstructures, Ru/Al multilayers were designed via magnetron sputtering with systematic variation of bilayer modulation periods and subsequent vacuum annealing. Thin films samples were characterized by in situ high-temperature XRD, TEM imaging and diffraction. It is shown that different phase sequences appear in strong correlation with the modulation length. Depending on the multilayer design, the phase formation toward single-phase RuAl thin films happens as either a multi-step or single-step event. In particular, below a critical threshold of the modulation period, the multi-step phase formation can be suppressed, and only the desired RuAl target phase is obtained with a pronounced growth in a preferred orientation. This finding may be versatile for the targeted synthesis of intermetallic phases, contributing to further understanding of phase formation in such nanoscale multilayer systems.

18 July 2024 in Advanced Engineering Materials
Verified
Journal Article
Open access
CSChristian Schäfer
Christian Schäfer
PDPablo Maria Delfino
Pablo Maria Delfino
PLPhilipp Leonhard‐Trautmann
Philipp Leonhard‐Trautmann
VOVincent Ott
Vincent Ott
SSSebastian Suarez
Sebastian Suarez
CPChristoph Pauly
Christoph Pauly
The manipulation of topography is crucial in surface engineering to customize material properties and surface functionalities for specific applications. Scientists have been inspired by natural surfaces found in plants and animals and have increasingly used engineered surface structures to improve characteristics such as friction, wear, electrical resistance, wettability, and antimicrobial behavior across various fields. Direct laser interference patterning (DLIP) is a technique that can rapidly create well‐defined, periodic surface structures. However, it can still face challenges such as surface roughness and non‐uniformity, which require complementary post‐processing techniques. This article investigates the effectiveness of electropolishing in phosphoric acid as a post‐processing method for DLIP‐treated copper surfaces. Through systematic characterization and analysis, it is demonstrated that electropolishing selectively smoothens DLIP‐treated surfaces by removing undesired by‐products, such as oxides and redeposited material while retaining the underlying structure. The real surface area and, consequently, the S ratio are diminished by up to 13%, while the root mean square roughness Rq along the topographic maxima of the line pattern is reduced by ≈90%. These findings contribute to the advancement of our understanding of surface modification techniques and their potential applications in diverse fields.

12 June 2023 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Open access
PDF file
KNkaveh dargahi noubary
kaveh dargahi noubary
CSChristian Schäfer
Christian Schäfer
Christoph PaulyChristoph Pauly
Christoph Pauly
MKMichael Kellner
Michael Kellner
VOVincent Ott
Vincent Ott
BNBritta Nestler
Britta Nestler
The self-propagating reaction in binary Al/Ru multilayers with two different bilayer thicknesses (89 and 178 nm, respectively) forming single-phase AlRu intermetallic compound is investigated experimentally and by means of phase-field simulations. Experimentally, the time-temperature evolution in free-standing films was recorded with a high-speed pyrometer, and the resulting microstructure was determined from electron backscatter diffraction measurements. The phase-field model is constructed based on the minimization of the grand potentials for which the required thermodynamic data are taken from the Calphad database. The simulation of the reaction and subsequent AlRu grain growth starts from Al-rich and Ru-rich layer fillings. After the formation of the AlRu phase is complete, the grain growth during cooling is simulated based on the experimentally recorded time-temperature curves. Finally, the resulting grain sizes obtained from the simulation are found to be in good agreement with the experimental results. Furthermore, it is shown that the final grain sizes in both simulations and experiments depend on the initial bilayer thicknesses.