This paper gives a comparison of the deformation and deflection of two types of tool holders used in turning processes. Comparison of the deflection and stresses has been performed on the location where the highest value of deflection can be measured i.e. on the tip of the cutting insert. Selected tool holder types (TH1 and TH2) have rectangular and polygonal shank. Tool holders were 3D modelled in SolidWorks and Autodesk Inventor software packages and exposed to the loading with ANSYS structural analysis FEM software. In FEM analysis, two elements size of the network are selected (mesh size 5 and 1 mm). The simulation was carried out for five different loading values acting on the tool holder model. Obtained results confirm lower stresses and deflections on CAPTO tool holders.
15 June 2023 in Tehnicki vjesnik - Technical Gazette
The paper deals with a novel design of a combined machine tool in comparison with known contemporary analogues. It is designed for multifunctional machining of workpieces in one or two setups in collet and centre-to-centre design. Typical of this mac...
1 May 2018 in Tehnicki vjesnik - Technical Gazette
The paper deals with a detailed analysis of deep drawing DC 01/DIN EN 10130-9 steel sheets of 1 mm in thickness treated by nitro-oxidation in fluid environment. The nitridation at 580°C/45 min and oxidation at 350°C/5 min was used. The...
The topic of the Special Issue, “Manufacturing Technology, Materials and Methods,” was chosen in response to the growing importance of modern production technologies in shaping efficient, sustainable, and economically viable manufacturing processes