Land use land cover (LULC) of city regions is strongly affected by urbanization and affects the thermal environment of urban centers by influencing the surface temperature of core city areas and their surroundings. These issues are addressed in the current study, which focuses on two provincial capitals in Pakistan, i.e., Lahore and Peshawar. Using Landsat data, LULC is determined with the aim to (a) examine the spatio-temporal changes in LULC over a period of 20 years from 1998 to 2018 using a CA-Markov model, (b) predict the future scenarios of LULC changes for the years 2023 and 2028, and (c) study the evolution of different LULC categories and investigate its impacts on land surface temperature (LST). The results for Peshawar city indicate the significant expansion in vegetation and built-up area replacing barren land. The vegetation cover and urban area of Peshawar have increased by 25.6%, and 16.3% respectively. In contrast, Lahore city urban land has expanded by 11.2% while vegetation cover decreased by (22.6%). These transitions between LULC classes also affect the LST in the study areas. Transformation of vegetation cover and water surface into built-up areas or barren land results in the increase in the LST. In contrast, the transformation of urban areas and barren land into vegetation cover or water results in the decrease in LST. The different LULC evolutions in Lahore and Peshawar clearly indicate their effects on the thermal environment, with an increasing LST trend in Lahore and a decrease in Peshawar. This study provides a baseline reference to urban planners and policymakers for informed decisions.

Water quality is highly affected by riverside vegetation in different regions. To comprehend this research, the study area was parted into wet and dry regions. The WASP8 was applied for the simulations of water quality profile over both Waterways selected from each region. It was found that the Ara Waterway, located in the wet regions, has a higher water quality variation in seasonal scale than that of the Yamuna Waterway, which is in the dry region. The interrelationship between river water quality variables and NDVI produce higher association for water quality variables with Pearson correlation coefficient values of about 0.66, 0.68 and −0.58, respectively, over the annual and seasonal scales in the energy limited regions. This approach will help in monitoring the seasonal variation and effect of the vegetation biomass on water quality for the sustainable water environment.

Vegetation classification has always been the focus of remote sensing applications, especially for tropical regions with fragmented terrain, cloudy and rainy climates, and dense vegetation. How to effectively classify vegetation in tropical regions by using multi-spectral remote sensing with high resolution and red-edge spectrum needs to be further verified. Based on the experiment in Wenchang, Hainan, China, which is located in the tropical monsoon region, and combined with the ZY-1 02D 2.5 m fused images in January, March, July, and August, this paper discusses whether NDVI and four red-edge vegetation indices (VIs), CIre, NDVIre, MCARI, and TCARI, can promote vegetation classification and reduce the saturation. The results show that the schemes with the highest classification accuracies in all phases are those in which the red-edge VIs are involved, which suggests that the red-edge VIs can effectively contribute to the classification of vegetation. The maximum accuracy of the single phase is 86%, and the combined accuracy of the four phases can be improved to 92%. It has also been found that CIre and NDVIre do not reach saturation as easily as NDVI and MCARI in July and August, and their ability to enhance the separability between different vegetation types is superior to that of TCARI. In general, red-edge VIs can effectively promote vegetation classification in tropical monsoon regions, and red-edge VIs, such as CIre and NDVIre, have an anti-saturation performance, which can slow down the confusion between different vegetation types due to saturation.

External interference in ionospheric sounding seriously degrades the quality of echo signals and data; thus, it should be eliminated. This paper presents a method for suppressing interference using chaotic coding with a set of Bernoulli map sequences; compared with other commonly used coding methods such as Barker code, complementary code, and Barker-like codes, through simulation, the ambiguity function (AF) of Bernoulli map codes has better performance in terms of peak sidelobe level (PSL), integral sidelobe ratio (ISL), noise suppression (NS), and signal-to-noise ratio (SNR). Experimental tests were performed using a vertical ionosonde in Yinchuan, Ningxia Hui Autonomous Region, China, and the ionosonde was operated by alternating 40-bit Barker-like coding and 40-bit Bernoulli map coding each day to compare the effectiveness of interference suppression. The results showed that using Bernoulli map coding could remove interference and improve SNR significantly, thereby improving the data quality of the resulting ionograms.

The authors wish to make the following corrections to this paper

The utilization of remote sensing soil moisture products in agricultural and hydrological studies is on the rise. Conducting a regional applicability analysis of these soil moisture products is essential as a preliminary step for their effective utilization. The triple collocation (TC) method enables the estimation of the standard deviation of errors in products when true soil moisture values are unavailable. It assesses data uncertainty and mitigates the influence of product errors on fusion, thereby enhancing product accuracy significantly. In this study, the TC uncertainty error analysis was employed to integrate Soil Moisture Active Passive (SMAP), the Advanced Microwave Scanning Radiometer 2 (AMSR-2), and the European Space Agency Climate Change Initiative (ESA CCI) active (ESA CCI A) and passive (ESA CCI P) products, with ground-based measurements serving as a reference. Traditional evaluation metrics, such as the correlation coefficient (R), bias, root mean square error (RMSE), and unin situed root mean square error (ubRMSE), were employed to evaluate the accuracy of the product. The findings indicate that SMAP and ESA CCI P products demonstrate strong spatiotemporal continuity within the research area and exhibit low uncertainty across various land types. The products derived from the Advanced Microwave Scanning Radiometer 2 (AMSR-2) exhibit a high level of temporal and spatial continuity; however, there is a requirement for enhancing their accuracy. The products of ESA CCI A exhibit notable spatiotemporal disjunction, contributing significantly to their elevated level of uncertainty. After fusion with TC analysis, the correlation coefficient (R = 0.7) of the TC-2 product derived from the fusion of SMAP, AMSR-2, and ESA CCI P products is significantly higher than the correlation coefficient of the TC-1 product (R = 0.65) obtained from the fusion of SMAP, AMSR-2, and ESA CCI A products at a 95% confidence level. The integration of data can efficiently mitigate the challenges associated with spatiotemporal gaps and inaccuracies in products, offering a dependable foundation for the subsequent utilization of remote sensing products.