Lu Peng

Dr. Lu Peng

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 January 2020 in Sensors
Verified
Journal Article
Open access
PDF file
LPLu Peng
Lu Peng
GJGen-qiang Jing
Gen-qiang Jing
ZLZhu Luo
Zhu Luo
XYXin Yuan
Xin Yuan
YWYixu Wang
Yixu Wang
BZBing Zhang
Bing Zhang
Deformation is a ubiquitous phenomenon in nature. This process usually refers to the change in shape, size, and position of an object in the time and spatial domain under various loads. Under normal circumstances, during engineering construction, technicians are generally required to monitor the safe operation of structural facilities in the transportation field and the health of bridge, because monitoring in the engineering process plays an important role in construction safety. Considering the reliability risk of sensors after a long-time work period, such as signal drift, accurate measurement of strain gauges is inseparable from the value traceability system of high-precision strain gauges. In this study, two vibrating wire strain gauges with the same working principle were measured using the parallel method at similar positions. First, based on the principle of time series, the experiment used high-frequency dynamic acquisition to measure the thermometer strain of two vibrating wire strain gauges. Second, this experiment analyzed the correlation between strain and temperature measured separately. Under the condition of different prestress, this experiment studied the influencing relationship of temperature corresponding variable. In this experiment, the measurement repetitiveness was analyzed using the meteorology knowledge of single sensor data, focused on researching the influence of temperature and prestress effect on sensors by analyzing differences of their measurement results in a specified situation. Then, the reliability and stability of dynamic vibrating wire strain gauge were verified in the experiment. The final conclusion of the experiment is the actual engineering in the later stage. Onsite online meteorology in the application provides support.

7 October 2025 in Sensors
Verified
Journal Article
Open access
PDF file
XFXiaofan Feng
Xiaofan Feng
LPLu Peng
Lu Peng
YTYu Tang
Yu Tang
CLChang Liu
Chang Liu
HAHuazhen An
Huazhen An
With the strict requirements of national policies on truck dimensions, axle loads, and weight limits, along with the implementation of tolls based on vehicle types, rapid and accurate identification of vehicle axle types has become essential for toll station management. To address the limitations of existing methods in distinguishing between drive and driven axles, complex equipment setup, and image evidence retention, this article proposes a panoramic image detection technology for vehicle chassis based on enhanced ORB and YOLOv11. A portable vehicle chassis image acquisition system, based on area array cameras, was developed for rapid on-site deployment within 20 min, eliminating the requirement for embedded installation. The FeatureBooster (FB) module was employed to optimize the ORB algorithm’s feature matching, and combined with keyframe technology to achieve high-quality panoramic image stitching. After fine-tuning the FB model on a domain-specific area scan dataset, the number of feature matches increased to 151 ± 18, substantially outperforming both the pre-trained FB model and the baseline ORB. Experimental results on axle type recognition using the YOLOv11 algorithm combined with ORB and FB features demonstrated that the integrated approach achieved superior performance. On the overall test set, the model attained an mAP@50 of 0.989 and an mAP@50:95 of 0.780, along with a precision (P) of 0.98 and a recall (R) of 0.99. In nighttime scenarios, it maintained an mAP@50 of 0.977 and an mAP@50:95 of 0.743, with precision and recall both consistently at 0.98 and 0.99, respectively. The field verification shows that the real-time and accuracy of the system can provide technical support for the axle type recognition of toll stations.

1 March 2021 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
LPLu Peng
Lu Peng
GJGenqiang Jing
Genqiang Jing
YWYixu Wang
Yixu Wang
NMNa Miao
Na Miao
Bridge structure quality inspection and health monitoring are important research contents of the transportation industry. This study uses the national standard 6061 aluminum alloy cylindrical bar, and vibrating the vibrating wire strain sensor used in the mainstream of the two markets in a symmetrical position. This study used a superimposed force standard machine to perform a 0-100KN compression test on a bar. We performed data regression analysis on the data of the two sensors collected and obtained a new model. By comparing the output values with the traced force standard machine, we conclude that the trend of the model is consistent with the trend of the force standard machine. This study provides a theoretical basis for the rapid calibration detection of bridges before installation by strain monitoring sensors.

8 September 2026 in Buildings
Verified
Journal Article
Open access
PDF file
LLLu Liu
Lu Liu
PYPinhong Yang
Pinhong Yang
KCKai Chen
Kai Chen
JCJianjun Cui
Jianjun Cui
YWYixu Wang
Yixu Wang
BCBing Chai
Bing Chai
This study aims to construct a graded evaluation method for the construction quality of Highway Prefabricated Beam Bridges, in order to support refined quality control beyond the traditional “qualified/unqualified” judgment. Existing evaluation methods have difficulty effectively distinguishing quality differences within the qualified range, may cause redundant calculations for indicator information with non-linear correlations, are susceptible to the influence of outlier expert judgments, and may mask local critical defects when adopting linear weighted aggregation. This paper uses historical quality inspection and expert evaluation records from 50 prefabricated beam bridges to validate the proposed method. Experimental results show that the proposed method achieves an RMSE of 1.24, outperforming the traditional AHP method (1.79) and the equal-weight method (2.52). Five-fold grouped cross-validation at the bridge level gave an RMSE of 1.2180 ± 0.0802 and an R2 of 0.9536. It can provide accurate intelligent decision support for quality and safety control during the construction of Highway Prefabricated Beam Bridges, and promotes the digital upgrade of quality management in the construction industry. The proposed framework can be integrated into a digital construction quality management platform to support bridge quality ranking and early warning of safety-critical defects. The originality of this paper lies in the integration, within a unified evaluation framework, of continuous score conversion based on probability distributions, manifold-learning-based redundancy correction for indicators, geometrically median-based robust fusion of expert weights, and a threshold-triggered risk-sensitive weight adjustment mechanism.

21 September 2023
Verified
Book Chapter
Open access
PDF file
YTYu Tang
Yu Tang
XFXiaofan Feng
Xiaofan Feng
LPLu Peng
Lu Peng
KLKai Li
Kai Li
LWLong Wen
Long Wen
This paper presents a study on the reliability analysis and online measuring of sensors in Structural Health Monitoring (SHM) systems. As sensors are critical components in SHM, their reliability and accuracy are vital for the precise and effective operation of the monitoring system. By utilizing a strain testing platform and online measurement methods, this study analyzes the reliability and effectiveness of in-service sensors by comparing measurements on similar positions and applies the indoor experiment to an actual bridge structure. The results demonstrate that the proposed method can achieve precise reliability analysis and online measuring, ensuring the effectiveness and smooth operation of the SHM system and further enhancing the fundamental safety level of bridges while providing convenience to bridge management.

24 August 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
PWPeixiang Wang
Peixiang Wang
BLBinbin Li
Binbin Li
MTMichael Todd
Michael Todd
LPLu Peng
Lu Peng
Structural response imputation and prediction in structural health monitoring (SHM) have often been treated as independent of system identification, although in practice they are intrinsically connected through the underlying structural dynamics. In this study, we propose a unified hierarchical Bayesian framework for system identification with response imputation and prediction naturally obtained as by-products. Specifically, the structural dynamics are represented using a modal-form state-space model, which significantly reduces the parameter dimensionality while preserving physical interpretability. A hierarchical Bayesian model then incorporates process uncertainty, measurement noise, and system-parameter uncertainty in a principled manner. Automatic relevance determination priors are integrated to adaptively suppress insignificant modal components, enabling automated system identification without prior specification of model order. For efficient posterior inference, a variational Bayesian expectation-maximization algorithm is developed; closed-form update equations are derived, and an augmented state-space formulation is employed to handle missing observations. The proposed method is thoroughly validated using synthetic, laboratory, and field data. Results demonstrate robust response imputation under both random and continuous missing-data patterns, even at high missing rates, and reliable prediction performance when historical records are incomplete. The proposed approach thus offers a practical and unified probabilistic tool for long-term SHM applications.