Xue Du

Mrs. Xue Du

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 December 2021 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
XDXue Du
Xue Du
GWGuanghui Wei
Guanghui Wei
Hong-Ze ZhaoHong-Ze Zhao
Hong-Ze Zhao
XPXiaodong Pan
Xiaodong Pan
In order to establish the prediction model of radar equipment in multisource complex electromagnetic environment, the blocking effect and false alarm interference effect caused by single-frequency CW (continuous wave) electromagnetic interference on typical radar equipment are studied. Taking a certain sweep radar as the research object, the equivalent injection test of EMI (electromagnetic interference) is carried out. Based on the theory of radar front door coupling, the interference mechanism of EMI to radar receiver RF front end is revealed, and the variation law of blocking target and false alarm target level is analyzed. The results show that, under the single-frequency CW-EMI, the target echo level decreases with the increase of the interference field strength, and the false alarm level increases with the increase of the interference field strength. The blocking jamming sensitive bandwidth is about , and the false alarm jamming sensitive bandwidth is about .

5 May 2022 in Sensors
Verified
Journal Article
Open access
PDF file
XLXuxu Lyu
Xuxu Lyu
GWGuanghui Wei
Guanghui Wei
XLXinfu Lu
Xinfu Lu
HWHaojiang Wan
Haojiang Wan
XDXue Du
Xue Du
Most studies assessing the safety of hot bridge wire EEDs employ temperature sensors that directly use the measurements of the temperature measurement device without analyzing the accuracy of the temperature measurement. This study establishes the response function of the exposed bridge and exposed bridge temperature rise system of hot bridge wire EEDs through the Rosenthal’s temperature rise equation and Laplace transformation as well as experimental tests, and through the response function, the response law and numerical characteristics of the two are compared and analyzed under four typical excitations. Under steady current injection and continuous-wave radiation, both exposed bridge and exposed bridge temperature measurement systems can reach thermal equilibrium, and the equilibrium temperature of both are the same. However, under pulse excitation, the temperature rise measurement value is significantly different from the actual value due to the large difference in response time of the exposed bridge (1 ms) and the exposed bridge temperature measurement device (0.82 s). Studies have shown that under steady current injection and continuous-wave radiation, temperature rise measurements can be directly applied to the safety assessment of hot bridge wire EEDs, while under pulsed conditions, temperature rise measurements cannot be directly applied.

1 June 2022 in AIP Advances
Verified
Journal Article
Open access
PDF file
Hong-Ze ZhaoHong-Ze Zhao
Hong-Ze Zhao
GWGuanghui Wei
Guanghui Wei
XPXiaodong Pan
Xiaodong Pan
XLXin-Fu Lu
Xin-Fu Lu
XDXue Du
Xue Du
ZZZhi-Kui Zhao
Zhi-Kui Zhao
In the test of the electromagnetic radiation blocking effect of the navigation receiver, it is found that the sensitivity of the navigation receiver to single frequency continuous waves and sinusoidal amplitude modulation waves will change with the change in the satellite useful signal strength. This phenomenon reflects that the sensitivity of frequency equipment to multi-frequency electromagnetic radiation is not fixed to a certain extent. In order to make up for the deficiency that the existing multi-frequency electromagnetic radiation evaluation methods can only deal with a single situation, this paper uses the time delay characteristics of the circuit response, introduces the concepts of normalized interference levels and signal duty cycles, establishes the evaluation model of the multi-frequency non-intermodulation electromagnetic radiation blocking effect of frequency equipment, and puts forward the prediction method of the multi-frequency electromagnetic radiation blocking effect of frequency equipment. Taking a certain type of BeiDou navigation receiver as the test object, the single-frequency continuous wave and double-frequency continuous wave electromagnetic radiation blocking effect tests are carried out by using the full-level irradiation method. The test data are substituted into the model established in this paper for verification. The results show that the maximum evaluation error of the model is 2.23 dB. The model and the effect prediction method established in this paper are of great significance for the survival ability evaluation of frequency equipment in complex electromagnetic environments.

7 May 2022 in Sensors
Verified
Journal Article
Open access
PDF file
XDXue Du
Xue Du
GWGuanghui Wei
Guanghui Wei
KZKai Zhao
Kai Zhao
Hong-Ze ZhaoHong-Ze Zhao
Hong-Ze Zhao
XLXuxu Lyu
Xuxu Lyu
In order to master the position variation rule of radar false alarm signal under continuous wave (CW) electromagnetic interference and reveal the mechanism of CW on radar, taking a certain type of stepping frequency radar as the research object, theoretical analysis of the imaging mechanism of radar CW electromagnetic interference false alarm signals from the perspective of time-frequency decoupling and receiver signal processing. Secondly, electromagnetic interference injection method is used to test the single-frequency and dual-frequency electromagnetic interference effect of the tested equipment. The results show that under the single frequency CW electromagnetic interference, the sensitive bandwidth of false alarm signal is about ±75 MHz, and the position of false alarm signal irregularity changes. Under the in-band dual-frequency CW electromagnetic interference, the position of non-intermodulation false alarm signal is similar to that of single frequency. However, the distance difference of two non-intermodulation false alarm signals is regular. In addition, the positions of the second-order intermodulation false alarm signals of the tested radar are also regular, and its position changes with the change of the second-order intermodulation frequency difference.

18 September 2023 in Measurement Science and Technology
Verified
Journal Article
Closed access
XLXuxu Lyu
Xuxu Lyu
GWGuanghui Wei
Guanghui Wei
XLXinfu Lu
Xinfu Lu
XDXue Du
Xue Du
JSJiangning Sun
Jiangning Sun
HZHongze Zhao
Hongze Zhao
To address the problem of the difference in temperature between the exposed and amorce-filled state of the bridge wire in the fiber optic thermometry, this paper proceeds from a mathematical model of the temperature rise of the hot bridge wire electro-explosive device (EED), the relationship between the critical ignition temperature and the current of hot bridge wire EED is discussed. Combining thermal ignition theory, the technique of measurement and calibration the critical ignition temperature of hot bridge wire EED is proposed, and the technique is validated by injection versus radiation. The results show that the critical ignition temperature of the tested hot bridge wire EED obtained by testing and calibration is 337.53 °C. The 50% ignition field strength of the hot bridge wire EED under radiation conditions obtained by the up-and-down method test is 1271 V m−1, while the equivalent ignition field strength determined from the critical ignition temperature under the same radiation conditions is 1345 V m−1, the error between the two is only 0.49 dB, which demonstrates the high accuracy of the proposed measurement and calibration technique.

13 November 2022 in Electronics
Verified
Journal Article
Open access
PDF file
XDXue Du
Xue Du
GWGuanghui Wei
Guanghui Wei
XPXiaodong Pan
Xiaodong Pan
HWHaojiang Wan
Haojiang Wan
Hong-Ze ZhaoHong-Ze Zhao
Hong-Ze Zhao
In order to improve the radar’s electromagnetic protection ability, it is essential to master the law of the false alarm effect of the radar’s out-of-band third-order intermodulation electromagnetic radiation, starting from the circuit field-circuit coupling mechanism, and the mechanism of the third-order intermodulation false alarm effect is analyzed. Taking a stepped frequency ranging radar as the research object, the absolute level value of the false alarm signal is selected as the sensitive criterion of the false alarm effect. The dual-frequency electromagnetic false alarm interference effect is carried out by using the method of the differential mode injection equivalent substitution electromagnetic radiation. The results show that the dual-frequency electromagnetic interference will cause the radar to generate the third-order intermodulation false alarm signal with the random position and waveform spreading. Under a certain interference intensity, the level of the third-order intermodulation false alarm signal increases with the increase of the interference field strength. With the continuous increase of the interference field strength, the fifth-order intermodulation false alarm signal gradually appears. The imaging mechanism, the waveform characteristics, and the level change law of the fifth-order intermodulation false alarm target, are similar to the third-order intermodulation false alarm target, and its position is also random. The maximum third-order intermodulation false alarm signal can reach 18 dBmV, indicating that the radar is sensitive to the out-of-band intermodulation electromagnetic interference.