In order to establish the prediction model of radar equipment in multisource complex electromagnetic environment, the blocking effect and false alarm interference effect caused by single-frequency CW (continuous wave) electromagnetic interference on typical radar equipment are studied. Taking a certain sweep radar as the research object, the equivalent injection test of EMI (electromagnetic interference) is carried out. Based on the theory of radar front door coupling, the interference mechanism of EMI to radar receiver RF front end is revealed, and the variation law of blocking target and false alarm target level is analyzed. The results show that, under the single-frequency CW-EMI, the target echo level decreases with the increase of the interference field strength, and the false alarm level increases with the increase of the interference field strength. The blocking jamming sensitive bandwidth is about , and the false alarm jamming sensitive bandwidth is about .
8 December 2022 in IEEE Transactions on Electromagnetic Compatibility
In order to evaluate the viability of frequency equipment in complex electromagnetic environment, the electromagnetic radiation effect evaluation model of random noise is established based on the analysis of the blocking effect mechanism of frequency equipment. Through MATLAB calculation, the corresponding relationship table between the ratio of the critical interference field strength effective value of single frequency continuous wave and sinusoidal amplitude modulation wave and the key parameters of the model is given, and the prediction method of noise electromagnetic interference of frequency equipment is proposed. Taking a Beidou navigation receiver as the test object, the accuracy of the noise electromagnetic radiation blocking effect model is verified by single frequency continuous wave, random noise and narrowband noise electromagnetic radiation blocking effect test, and the maximum error is only 1.51 dB, which indicates that the model and prediction method proposed in this article can accurately evaluate and predict the electromagnetic radiation interference of random noise.
In the test of the electromagnetic radiation blocking effect of the navigation receiver, it is found that the sensitivity of the navigation receiver to single frequency continuous waves and sinusoidal amplitude modulation waves will change with the change in the satellite useful signal strength. This phenomenon reflects that the sensitivity of frequency equipment to multi-frequency electromagnetic radiation is not fixed to a certain extent. In order to make up for the deficiency that the existing multi-frequency electromagnetic radiation evaluation methods can only deal with a single situation, this paper uses the time delay characteristics of the circuit response, introduces the concepts of normalized interference levels and signal duty cycles, establishes the evaluation model of the multi-frequency non-intermodulation electromagnetic radiation blocking effect of frequency equipment, and puts forward the prediction method of the multi-frequency electromagnetic radiation blocking effect of frequency equipment. Taking a certain type of BeiDou navigation receiver as the test object, the single-frequency continuous wave and double-frequency continuous wave electromagnetic radiation blocking effect tests are carried out by using the full-level irradiation method. The test data are substituted into the model established in this paper for verification. The results show that the maximum evaluation error of the model is 2.23 dB. The model and the effect prediction method established in this paper are of great significance for the survival ability evaluation of frequency equipment in complex electromagnetic environments.
In order to master the position variation rule of radar false alarm signal under continuous wave (CW) electromagnetic interference and reveal the mechanism of CW on radar, taking a certain type of stepping frequency radar as the research object, theoretical analysis of the imaging mechanism of radar CW electromagnetic interference false alarm signals from the perspective of time-frequency decoupling and receiver signal processing. Secondly, electromagnetic interference injection method is used to test the single-frequency and dual-frequency electromagnetic interference effect of the tested equipment. The results show that under the single frequency CW electromagnetic interference, the sensitive bandwidth of false alarm signal is about ±75 MHz, and the position of false alarm signal irregularity changes. Under the in-band dual-frequency CW electromagnetic interference, the position of non-intermodulation false alarm signal is similar to that of single frequency. However, the distance difference of two non-intermodulation false alarm signals is regular. In addition, the positions of the second-order intermodulation false alarm signals of the tested radar are also regular, and its position changes with the change of the second-order intermodulation frequency difference.
To solve the problem of testing the sensitivity under electromagnetic pulse radiation for a hot bridge wire electro-explosive device (EED), this paper simulated and analyzed the correlation between the critical ignition current under steady and pulse excitation. The simulation results showed that, under single pulse excitation, the critical ignition current of the EED decreases with the increase in the pulse width, and the variation law can be divided into three pieces: adiabatic, transition, and constant; while under pulse train excitation, due to the thermal cumulative effect, the critical ignition current is related to both material properties and excitation parameters. By analyzing the simulation results and considering the thermal ignition theory, the mathematical model of the critical ignition current under pulse excitation was established, and the mathematical model showed that under pulse train excitation, the critical ignition current is relevant not only to the single pulse excitation critical ignition current, pulse period, and duty cycle, but also to the ratio of single pulse and steady excitation critical ignition current and the thermal time constant. It was verified that the errors between the theoretical values obtained from the mathematical model and the results obtained from the simulation were within 2.5%.
In order to improve the radar’s electromagnetic protection ability, it is essential to master the law of the false alarm effect of the radar’s out-of-band third-order intermodulation electromagnetic radiation, starting from the circuit field-circuit coupling mechanism, and the mechanism of the third-order intermodulation false alarm effect is analyzed. Taking a stepped frequency ranging radar as the research object, the absolute level value of the false alarm signal is selected as the sensitive criterion of the false alarm effect. The dual-frequency electromagnetic false alarm interference effect is carried out by using the method of the differential mode injection equivalent substitution electromagnetic radiation. The results show that the dual-frequency electromagnetic interference will cause the radar to generate the third-order intermodulation false alarm signal with the random position and waveform spreading. Under a certain interference intensity, the level of the third-order intermodulation false alarm signal increases with the increase of the interference field strength. With the continuous increase of the interference field strength, the fifth-order intermodulation false alarm signal gradually appears. The imaging mechanism, the waveform characteristics, and the level change law of the fifth-order intermodulation false alarm target, are similar to the third-order intermodulation false alarm target, and its position is also random. The maximum third-order intermodulation false alarm signal can reach 18 dBmV, indicating that the radar is sensitive to the out-of-band intermodulation electromagnetic interference.