A coplanar waveguide (CPW) fed flexible interconnected 4-port MIMO antenna is proposed for UWB, X, and Ku band applications having a size $0.67\lambda \times 0.81\lambda \times 0.0028\lambda $ (at 3.58 GHz). The antenna parameters are characterized by using sets of real measurements to validate the antenna design and modelling. A precise milling machine is used for fabricating the single and 4-port antennas over a flexible FR-4 Substrate. Vector network analyser (VNA) is used for measuring scattering and transmission coefficients. As well as, a shielded anechoic chamber is utilised for measuring the far field radiations and the gain of the antenna under test (AUT). The basic antenna that is a part of the 4-port structure consists of a CPW fed octagonal structure surrounded by an octagonal-shaped slot. The MIMO ability is achieved by arranging the 4 identical elements symmetrically in a successive rotational means for achieving good polarization diversity. The connected ground between the elements is achieved by introducing a plus-shaped slotted structure separated by a slotted diamond at the center in the 4-port structure. None of the slots touches each other thus ensuring the common reference while maintaining the inter-element isolation better than 15 dB. The antenna demonstrated maximum gain and minimum efficiency of 6.8 dBi and 89%, respectively besides attaining a 10-dB impedance bandwidth of 125.83% (3.89-17.09 GHz) and envelope correlation coefficient (ECC) < 0.02. Finally, the 4-port flexible antenna is tested in terms of S parameters and ECC under bending conditions along the X and Y axis followed by a time-domain analysis that exhibited very good performance.
In this paper, we developed a 2-port dual-band and dual-polarization multiple-input- multiple-output (MIMO) antenna for fifth-generation (5G) mobile applications at 28 and 38 GHz. The antenna was fabricated using a double-layer Rogers ™ RO4003 substrate with a footprint of $3.77\,\,\lambda _{0}\times 1.86\,\,\lambda _{0}$ ( $\lambda _{0}$ being the free-space wavelength at 28 GHz). The aperture-coupled patch configuration fed by a coplanar waveguide (CPW) transmission line is adopted as the elementary antenna. The top patch and the coupling aperture are designed to radiate at 38 GHz and 28 GHz respectively for dual-band operation. Further enhancement of the directivity at 28 GHz is achieved through the top patch acting as a parasitic director. A 2-by-4 array antenna for MIMO application was then constructed through physical rotation of the single element at +45 and −45 degrees to create polarization diversities. The 2-port MIMO antenna realized using this configuration demonstrated an impedance bandwidth of S11<−10 dB covering 27.6–30.3 GHz and 33.4–40.4 GHz, a gain of greater than 8 dBi, isolation of more than 20 dB and a cross-polarization level of greater than 20 dB. The important MIMO parameters such as ECC, DG, TARC, and MEG have also been characterized and presented.
High-performance GaN metal-oxide-semiconductor high-electron-mobility transistors (MOSHEMTs) using Al 2 O 3 gate dielectric deposited by atomic layer deposition (ALD) and damage-free neutral beam etch (NBE) gate recess process for millimeter-wave power applications are demonstrated. The high-quality ALD Al 2 O 3 reduces the gate leakage current of the device and the NBE method eliminates the plasma-induced defects in the nitride materials. The MOSHEMT device fabricated exhibits a high maximum drain current density (I DS,max ) of 1.65 A/mm and a high peak extrinsic transconductance (g m.ext ) of 653 mS/mm. The MOSHEMT device also demonstrates excellent RF performances, including f T /f MAX = 183/191 GHz, NF min = 2.56 dB with G AS = 5.61 dB at 54 GHz, and an output power density of 2.7 W/mm associated with a power-added efficiency of 20.9% and a linear power gain of 9.4 dB at 38 GHz. To the best of our knowledge, the noise performance at 54 GHz is the best reported so far for the AlGaN/GaN HEMTs.
An 80-nm InP high electron mobility transistor (HEMT) with InAs channel and InGaAs subchannels has been fabricated. The high current gain cutoff frequency (ft) of 310 GHz and the maximum oscillation frequency (fmax) of 330 GHz were obtained at VDS = 0.7 V due to the high electron mobility in the InAs channel. Performance degradation was observed on the cutoff frequency (ft) and the corresponding gate delay time caused by impact ionization due to a low energy bandgap in the InAs channel. DC and RF characterizations on the device have been performed to determine the proper bias conditions in avoidance of performance degradations due to the impact ionization. With the design of InGaAs/InAs/InGaAs composite channel, the impact ionization was not observed until the drain bias reached 0.7 V, and at this bias, the device demonstrated very low gate delay time of 0.63 ps. The high performance of the InAs/InGaAs HEMTs demonstrated in this letter shows great potential for high-speed and very low-power logic applications.