In this paper, a basic cell for low-power and/or low-voltage operation is identified. It is evidenced how different versions of this cell, coined as "flipped voltage follower (FVF)" have been used in the past for many applications. A detailed classification of basic topologies derived from the FVF is given. In addition, a comprehensive list of recently proposed low-voltage/low-power CMOS circuits based on the FVF is given. Although the paper has a tutorial taste, some new applications of the FVF are also presented and supported by a set of simulated and experimental results. Finally, a design example showing the application of the FVF to build systems based on translinear loops is described which shows the potential of this cell for the design of high-performance low-power/low-voltage analog and mixed-signal circuits.

A novel design principle for very low-voltage analog signal processing in CMOS technologies is presented. It is based on the use of quasi-floating gate (QFG) MOS transistors. Similar to multiple input floating gate (MIFG) MOS transistors, a weighted averaging of the inputs accurately controlled by capacitance ratios can be obtained, which is the basic operating principle. Nevertheless, issues often encountered in MIFG structures, such as the initial charge trapped in the floating gates or the gain-bandwidth product degradation, are not present in QFG configurations. Several CMOS circuit realizations using open- and closed-loop topologies, have been designed. They include analog switches, mixers, programmable-gain amplifiers, track and hold circuits, and digital-to-analog converters. All these circuits have been experimentally verified, confirming the usefulness of the proposed technique for very low-voltage applications.

Receivers are being digitized in a quest for flexibility. Analog filters and programmable gain stages are being exchanged for digital processing at the price of a very challenging ADC. This paper presents an alternative solution where the filter and programmable gain functionality is integrated into a /spl Sigma//spl Delta/ ADC. The novel filtering ADC is realized by adding a high-pass feedback path to a conventional /spl Sigma//spl Delta/ ADC while a compensating low-pass filter in the forward path maintains stability. As such, the ADC becomes highly immune to interferers even if they exceed the maximum allowable input level for the wanted channel. As a consequence, the ADC input range can be programmed dynamically to the level of the wanted signal only. This results in an input-referred dynamic range of 89 dB in 1-MHz bandwidth and an intentionally moderate output signal-to-noise-and-distortion ratio of 46-59 dB (depending on the programmed gain). The merged functionality enables a better overall power/performance balance for the receiver baseband. The design consumes less than 2 mW and active area is 0.14 mm/sup 2/ in a 0.18-/spl mu/m digital CMOS technology.

A new operational transconductance amplifier and capacitor based sinusoidal voltage controlled oscillator is presented. The transconductor uses two cross-coupled class-AB pseudo-differential pairs biased by a flipped voltage follower, and it exhibits a wide transconductance range with low power consumption and high linearity. The oscillator has been fabricated in a standard 0.8-/spl mu/m CMOS process. Experimental results show a frequency tuning range from 1 to 25 MHz. The amplitude is controlled by the transconductor nonlinear characteristic. The circuit is operated at 2-V supply voltage with only 1.58 mW of maximum quiescent power consumption.

A systematic comparison of flipped voltage followers circuits is presented. Two new versions of the flipped voltage follower are introduced. They are characterized by very low output impedance, high bandwidth speed, wide signal swing. All structures can be easily modified for class AB operation. Simulation results show that the newly introduced structures have optimal characteristics

A complete low-power, low-cost and wireless solution for bridge structural health monitoring is presented. This work includes monitoring nodes with modular hardware design and low power consumption based on a control and resource management board called CoreBoard, and a specific board for sensorization called SensorBoard is presented. The firmware is presented as a design of FreeRTOS parallelised tasks that carry out the management of the hardware resources and implement the Random Decrement Technique to minimize the amount of data to be transmitted over the NB-IoT network in a secure way. The presented solution is validated through the characterization of its energy consumption, which guarantees an autonomy higher than 10 years with a daily 8 min monitoring periodicity, and two deployments in a pilot laboratory structure and the Eduardo Torroja bridge in Posadas (Córdoba, Spain). The results are compared with two different calibrated commercial systems, obtaining an error lower than 1.72% in modal analysis frequencies. The architecture and the results obtained place the presented design as a new solution in the state of the art and, thanks to its autonomy, low cost and the graphical device management interface presented, allow its deployment and integration in the current IoT paradigm.