The paper presents a design of repetitive control (RC) in the current control system of a three-phase grid-tied converter. The goal of the control system is to provide sinusoidal input filter currents under the conditions of distorted and asymmetrical grid voltage. A novel design of the RC is presented, in which the repetitive part is not excited by sharp and non-periodic changes of the reference signal, but it enables high-quality performance under periodic disturbance conditions. In the proposed system. RC cooperates with a discrete state feedback controller. An innovative approach to tuning is proposed in which parameters of the repetitive, as well as the state feedback controller, are selected as a result of the optimization process with the use of a particle swarm algorithm. The proposed control system is verified experimentally on a laboratory test bench. The achieved results confirm the high-quality system performance.
10 March 2021 in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
The paper features a grid-tied converter with a repetitive current controller. Our goal here is to demonstrate the complete design workflow for a repetitive controller, including phase lead, filtering and conditional learning. All key parameters, i.e., controller gain, filter and fractional phase lead, are designed in a single optimization procedure, which is a novel approach. The description of the design and optimization process, as well as experimental verification of the entire control system, are the most important contributions of the paper. Additionally, one more novelty in the context of power converters is verified in the physical system – a conditional learning algorithm to improve transient states to abrupt reference and disturbance changes. The resulting control system is tested experimentally in a 10 kW converter.
The paper proposes a design procedure for a current control system of a permanent magnet linear synchronous machine for a small cargo transportation system. The drive system utilizes a long stator linear motor, and the vehicle is equipped with permanent magnets. Due to the possible high distance between the inverter and stator, the power circuit contains an LC filter. Therefore, the current controller must deal with a three-phase inductive–capacitive–inductive (LCL) circuit. Moreover, the stator of the machine is divided into segments. This leads to relatively fast changes in the induced voltage when the vehicle is passing through segment boundaries. Therefore, the current controller must deal with fast-changing disturbances. The state feedback control with gains selected using the linear-quadratic regulator approach is used to achieve high-quality system performance. Design and implementation include retuning of the controller gains for variable synchronous frequency. The control system is designed in the discrete domain concerning signal processing delay. The current control system with optimal gains is applied on the digital signal controller and verified experimentally on the test track.