Silicon carbide (SiC) is emerging rapidly in novel photonic applications thanks to its unique photonic properties facilitated by the advances of nanotechnologies such as nanofabrication and nanofilm transfer. This review paper will start with the introduction of exceptional optical properties of silicon carbide. Then, a key structure, i.e., silicon carbide on insulator stack (SiCOI), is discussed which lays solid fundament for tight light confinement and strong light-SiC interaction in high quality factor and low volume optical cavities. As examples, microring resonator, microdisk and photonic crystal cavities are summarized in terms of quality (Q) factor, volume and polytypes. A main challenge for SiC photonic application is complementary metal-oxide-semiconductor (CMOS) compatibility and low-loss material growth. The state-of-the-art SiC with different polytypes and growth methods are reviewed and a roadmap for the loss reduction is predicted for photonic applications. Combining the fact that SiC possesses many different color centers with the SiCOI platform, SiC is also deemed to be a very competitive platform for future quantum photonic integrated circuit applications. Its perspectives and potential impacts are included at the end of this review paper.
In this review paper, several new approaches about the 3C-SiC growth are been presented. In fact, despite the long research activity on 3C-SiC, no devices with good electrical characteristics have been obtained due to the high defect density and high level of stress. To overcome these problems, two different approaches have been used in the last years. From one side, several compliance substrates have been used to try to reduce both the defects and stress, while from another side, the first bulk growth has been performed to try to improve the quality of this material with respect to the heteroepitaxial one. From all these studies, a new understanding of the material defects has been obtained, as well as regarding all the interactions between defects and several growth parameters. This new knowledge will be the basis to solve the main issue of the 3C-SiC growth and reach the goal to obtain a material with low defects and low stress that would allow for realizing devices with extremely interesting characteristics.
A comparative analysis of cathodoluminescence spectra in 4H–SiC layers with different N, Al, and B content is reported. The layers were produced by sublimation epitaxy and residual impurity concentrations were determined by secondary ion mass spectrometry. Epilayers doped with B in a wide concentration range, were achieved. Evidence of N, Al, and B related emissions by cathodoluminescence experiments is presented. Differences in the luminescence emitted by the layers are established that are attributed to different B content and impurity cooperation. The characteristics of broad green emission, originating from B-related centers, at 4.6 K, 300 K, as well as in high temperature annealed layers are discussed. The experimental results suggest that boron is involved in more than one deep acceptor center.
We have investigated the growth of 3C-SiC using sublimation growth in the temperature range from 1800°C to 1950°C. The supersaturation was determined using numerical modeling of the temperature field and gas phase composition by applying quasi-equilibrium thermodynamic conditions. Analysis of the 3C-SiC yield was carried out by optical microscopy, optical absorption, Raman spectroscopy and x-ray analysis. Quantitative data on supersaturation are compared with most stable 3C-SiC nucleation and growth condition. Finally the application to large area growth in a physical vapor transport growth reactor is briefly addressed.