Implementation of construction works on weak (e.g., compressible, collapsible, expansive) soils such as peatlands often is limited by logistics of equipment and shortage of available and applicable materials. If preloading or floating roads on geogrid reinforcement or piled embankments cannot be implemented, then soil stabilization is needed. Sustainable soil stabilization in an environmentally friendly way is recommended instead of applying known conventional methods such as pure cementing or excavation and a single replacement of soils. Substitution of conventional material (cement) and primary raw material (lime) with secondary raw material (waste and byproducts from industries) corresponds to the Sustainable Development Goals set by the United Nations, preserves resources, saves energy, and reduces greenhouse gas emissions. Besides traditional material usage, soil stabilization is achievable through various secondary raw materials (listed according to their groups and subgroups): 1. thermally treated waste products: 1.1. ashes from agriculture production; 1.2. ashes from energy production; 1.3. ashes from various manufacturing; 1.4. ashes from waste processing; 1.5. high carbon content pyrolysis products; 2. untreated waste and new products made from secondary raw materials: 2.1. waste from municipal waste biological treatment and landfills; 2.2. waste from industries; 3. new products made from secondary raw materials: 3.1. composite materials. Efficient solutions in environmental engineering may eliminate excessive amounts of waste and support innovation in the circular economy for sustainable future.

For decades, significant work has been conducted regarding plastic waste by dealing with rejected materials in waste masses through their accumulation, sorting and recycling. Important political and technical challenges are involved, especially with respect to landfilled waste. Plastic is popular and, notwithstanding decrease policies, it will remain a material widely used in most economic sectors. However, questions of plastic waste recycling in the contemporary world cannot be solved without knowing the material, which can be achieved by careful sampling, analysis and quantification. Plastic is heterogeneous, but usually all plastic waste is jointly handled for recycling and incineration. Separation before processing waste through the analytical approach must be applied. Modern landfill mining and site clean-up projects in contemporary waste management systems require comprehensive material studies ranging from the macro-characterization of waste masses to a more detailed analysis of hazardous constituents and properties from an energy calorific standpoint—where, among other methods, thermogravimetric research coupled with life cycle assessment (LCA) and economic assessment is highly welcomed.