High performance polymers with bio-based modifiers are promising materials in terms of applications and environmental impact. In this work, raw acacia honey was used as a bio-modifier for epoxy resin, as a rich source of functional groups. The addition of honey resulted in the formation of highly stable structures that were observed in scanning electron microscopy images as separate phases at the fracture surface, which were involved in the toughening of the resin. Structural changes were investigated, revealing the formation of a new aldehyde carbonyl group. Thermal analysis confirmed the formation of products that were stable up to 600 °C, with a glass transition temperature of 228 °C. An energy-controlled impact test was performed to compare the absorbed impact energy of bio-modified epoxy containing different amounts of honey with unmodified epoxy resin. The results showed that bio-modified epoxy resin with 3 wt% of acacia honey could withstand several impacts with full recovery, while unmodified epoxy resin broke at first impact. The absorbed energy at first impact was 2.5 times higher for bio-modified epoxy resin than it was for unmodified epoxy resin. In this manner, by using simple preparation and a raw material that is abundant in nature, a novel epoxy with high thermal and impact resistance was obtained, opening a path for further research in this field.

While dental poly methyl methacrylate(PMMA) possesses distinctive qualities such as ease of fabrication, cost-effectiveness, and favorable physical and mechanical properties, these attributes alone are inadequate to impart the necessary impact strength and hardness. Consequently, pure PMMA is less suitable for dental applications. This research focused on the incorporation of Strontium titanate (SrTiO₃-STO) and hybrid filler STO/Manganese oxide (MnO₂) to improve impact resistance and hardness. The potential of STO in reinforcing PMMA is poorly investigated, while hybrid filler STO/MnO₂ has not been presented yet. Differential scanning calorimetry is conducted in order to investigate the agglomeration influence on the PMMA glass transition temperature (T_g), as well as the leaching of residual monomer and volatile additives that could pose a threat to human health. It has been determined that agglomeration with 1 wt% loading had no influence on T_g, while the first scan revealed differences in evaporation of small molecules, in favor of composite PMMA-STO/MnO₂, which showed the trapping potential of volatiles. Investigations of mechanical properties have revealed the significant influence of hybrid STO/MnO₂ filler on microhardness and total absorbed impact energy, which were increased by 89.9% and 145.4%, respectively. Results presented in this study revealed the reinforcing potential of hybrid nanoparticles that could find application in other polymers as well.

Polymers and polymer matrix composites are commonly used materials with applications extending from packaging materials to delicate electronic devices. Epoxy resins and fiber-reinforced epoxy-based composites have been used as adhesives and construction parts. Fractal analysis has been recognized in materials science as a valuable tool for the microstructural characterization of composites by connecting fractal characteristics with composites’ functional properties. In this study, fractal reconstructions of different microstructural shapes in an epoxy-based composite were performed on field emission scanning electron microscopy (FESEM) images. These images were of glass fiber reinforced epoxy as well as a hybrid composite containing both glass and electrospun polystyrene fibers in an epoxy matrix. Fractal reconstruction enables the identification of self-similarity in the fractal structure, which represents a novelty in analyzing the fractal properties of materials. Fractal Real Finder software, based on the mathematical affine fractal regression model, was employed to reconstruct different microstructure shapes and calculate fractal dimensions to develop a method of predicting the optimal structure–property relations in composite materials in the future.

The microstructure–property relationship in poly(methyl methacrylate) PMMA composites is very important for understanding interface phenomena and the future prediction of properties that further help in designing improved materials. In this research, field emission scanning electron microscopy (FESEM) images of denture PMMA composites with SrTiO₃, MnO₂ and SrTiO₃/MnO₂ were used for fractal reconstructions of particle agglomerates in the polymer matrix. Fractal analysis represents a valuable mathematical tool for the characterization of the microstructure and finding correlation between microstructural features and mechanical properties. Utilizing the mathematical affine fractal regression model, the Fractal Real Finder software was employed to reconstruct agglomerate shapes and estimate the Hausdorff dimensions (HD). Controlled energy impact and tensile tests were used to evaluate the mechanical performance of PMMA-MnO₂, PMMA-SrTiO₃ and PMMA-SrTiO₃/MnO₂ composites. It was determined that PMMA-SrTiO₃/MnO₂ had the highest total absorbed energy value (E_tot), corresponding to the lowest HD value of 1.03637 calculated for SrTiO₃/MnO₂ agglomerates. On the other hand, the highest HD value of 1.21521 was calculated for MnO₂ agglomerates, while the PMMA-MnO₂ showed the lowest E_tot. The linear correlation between the total absorbed impact energy of composites and the HD of the corresponding agglomerates was determined, with an R² value of 0.99486, showing the potential use of this approach in the optimization of composite materials’ microstructure–property relationship.

The BaTiO₃ ceramics applications based on electronic properties have very high gradient scientific and industrial-technological interests. Our scientific research has been based on nano BaTiO₃ modified with Yttrium based organometallic salt (MOD-Y). The samples have been consolidated at a sintering temperature of 1350 °C. Within the study, the new frontiers for different electronic properties between the layers of BaTiO₃ grains have been introduced. The research target was grain boundary investigations and the influence on dielectric properties. After scanning electron microscopy and dielectric measurements, it has been established that modified BaTiO₃ samples with larger grains showed a better compact state that led to a higher dielectric constant value. DC bias stability was also investigated and showed a connection between the grain size and capacitance stability. Analyses of functions that could approximate experimental curves were successfully employed. Practical application of fractal corrections was performed, based on surface (α_s) and pore size (α_p) corrections, which resulted in obtainment of the relation between the capacitance and Curie temperature. Successful introduction of fractal corrections for capacitance-Curie temperature dependence for a set of experimental data is an important step towards further miniaturization of intergranular capacitors.

Dicyclopentadiene (DCPD)–poly(methyl methacrylate) (PMMA) core–shell fibers were fabricated via coaxial electrospinning to develop a self-healing polymer composite. A PMMA shell containing a first-generation Grubbs catalyst was co-spun with a DCPD core at 0.5 mL h⁻¹ and 28 kV, yielding smooth, cylindrical fibers. The diameter range of nanofibers was 300–900 nm, with 95% below 800 nm, as confirmed by FESEM image analysis. FTIR spectroscopy monitored shell integrity via the PMMA C=O stretch and core polymerization via the trans-C=C bands. The high presence of the 970 cm⁻¹ band in the healed nanofiber mat and the minor appearance in the uncut core–shell mat demonstrated successful DCPD polymerization mostly where the intended damage was. The optical clarity of PMMA enabled the direct monitoring of healing progress via optical microscopy. The presented findings demonstrate that PMMA can retain a liquid active core and catalyst to form a polymer layer on a damaged site and could be used as a model material for other self-healing systems that require healing monitoring.