In recent years, the utilization of microfluidic devices for precise manipulation of small flows has significantly increased. The effective management of microfluidics is closely associated with microchannel fabrication. The fabrication method employed for microfluidic devices directly impacts the roughness of the microchannels, consequently influencing the flows within them. In this study, the surface roughness of microchannels was investigated through three different fabrication processes: PDMS lithography, PLA printing, and UV resin printing. This research compared and analyzed the surface roughness of the microchannels fabricated using these methods. Furthermore, supported by a dynamic fluid simulator, the impact of surface roughness on flow behavior was shown. Results reveal varying degrees of roughness prominence in curved regions. Comparing microfluidic device fabrication techniques is crucial to optimize the process, control roughness, analyze flow rates, and select a proper material to be used in the development of microfluidic devices.

Hydrogel particles are essential in biological applications because of their distinctive capacity to retain water and encapsulate active molecules within their three-dimensional structure. Typical particle sizes range from nanometers (10–500 nm) to micrometers (1–500 µm), depending on the specific application and method of preparation. These characteristics render them optimal carriers for the administration of active compounds, facilitating the regulated and prolonged release of pharmaceuticals, including anticancer agents, antibiotics, and therapeutic proteins. Hydrogel particles can exhibit various morphologies, including spherical, rod-shaped, disk-shaped, and core–shell structures. Each shape offers distinct advantages, such as improved circulation time, targeted drug delivery, or enhanced cellular uptake. Additionally, hydrogel particles can be engineered to respond to various stimuli, such as temperature, pH, light, magnetic fields, and biochemical signals. Furthermore, their biocompatibility and capacity to acclimate to many biological conditions make them appropriate for sophisticated applications, including gene treatments, tissue regeneration, and cell therapies. Microfluidics has transformed the creation of hydrogel particles, providing precise control over their dimensions, morphology, and stability. This technique facilitates reproducible and highly efficient production, reducing reagent waste and optimizing drug encapsulation. The integration of microfluidics with hydrogels provides opportunities for the advancement of creative and effective solutions in contemporary medicine.

Acmella radicans (Asteraceae) is a plant native to America. Despite it having medicinal attributes, studies on its phytochemical properties are scarce, and biotechnological studies do not exist for this species. In this study, we established an adventitious root culture from A. radicans internodal segments in shake flasks with indole-3-butyric acid (IBA), and then elicited it with jasmonic acid (JA) and salicylic acid (SA). The total phenolic content and antioxidant activity were evaluated, and a comparison was made using in vitro plantlets and wild plants. Internodal segments with 0.1 mg/L IBA showed 100% root induction and exhibited better growth after transfer to shake flasks with MS liquid culture medium. JA had a significant effect on biomass increase compared to unelicited roots, mainly with 50 µM JA (28%), while SA did not show significant results. Root elicited with 100 µM (SA and JA) showed a 0.34- and 3.9-fold increase, respectively, in total phenolic content (TPC) compared to the control. The antioxidant activity was also significant, and a lower half-maximal inhibitory concentration (IC₅₀) was observed as the AJ concentration increased. Roots elicited with AJ (100 µM) exhibited high antioxidant activity with DPPH (IC₅₀ = 9.4 µg/mL) and ABTS (IC₅₀ = 3.3 µg/mL) assays; these values were close to those for vitamin C (IC₅₀ = 2.0 µg/mL). The TPC and antioxidant activity of in vitro plants and root cultured in shake flasks showed the lowest values in most cases; even the root cultures without elicitation were better than those of a wild plant. In this study, we demonstrated that A. radicans root culture is capable of producing secondary metabolites, while its production and antioxidant activity can be enhanced using jasmonic acid.

The formation of microparticles (MPs) of biocompatible and biodegradable hydrogels such as polyethylene glycol diacrylate (PEGDA) utilizing microfluidic devices is an attractive option for entrapment and encapsulation of active principles and microorganisms. Our research group has presented in previous studies a formulation to produce these hydrogels with adequate physical and mechanical characteristics for their use in the formation of MPs. In this work, hydrogel MPs are formed based on PEGDA using a microfluidic device with a T-junction design, and the MPs become hydrogel through a system of photopolymerization. The diameters of the MPs are evaluated as a function of the hydrodynamic condition flow rates of the continuous (Qc) and disperse (Qd) phases, measured by optical microscopy, and characterized through scanning electron microscopy. As a result, the following behavior is found: the diameter is inversely proportional to the increase in flow in the continuous phase (Qc), and it has a significant statistical effect that is greater than that in the flow of the disperse phase (Qd). While the diameter of the MPs is proportional to Qd, it does not have a significant statistical effect on the intervals of flow studied. Additionally, the MPs’ polydispersity index (PDI) was measured for each experimental hydrodynamic condition, and all values were smaller than 0.05, indicating high homogeneity in the MPs. The microparticles have the potential to entrap pharmaceuticals and microorganisms, with possible pharmacological and bioremediation applications.

In this work, bikaverin was isolated from the mycelium of Gibberella fujikuroi and characterized using 1D (1H and 13C) and 2D (HSQC and HMBC) NMR spectroscopy. Its cytotoxic effect on L5178Y lymphoma cells and antitumor effect on BALB/c mice inoculated with L5178Y cells were evaluated. According to the results, bikaverin showed cytotoxic effect against L5178Y lymphoma cells with an IC50 value of 0.23 μg/mL.The tumor evolution, with and without treatment, was observed in the in vivo study; the group without treatment showed 1,280±128 x 105 cells/mL in ascites volume, and the groups treated with bikaverin at the dose of 1.73 mg/kg/day by intraperitoneal (i.p.) and oral administration, decreased significantly the cell density, and showed 391.5±237 x 105 cells/mL and 580±208 x 105 cells/mL, respectively. The results confirm the cytotoxic effect of bikaverin on cancer cell lines and contribute to show the potential of bikaverin as antitumoral compound in BALB/c mice inoculated with L5178Y lymphoma cells.