Several research works have investigated the direct supply of renewable electricity to electrolysis, particularly from photovoltaic (PV) and wind generator (WG) systems. Hydrogen (H₂) production based on solar energy is considered to be the newest solution for sustainable energy. Different technologies based on solar energy which allow hydrogen production are presented to study their benefits and inconveniences. The technology of water decomposition based on renewable energy sources, to produce hydrogen, can be achieved by different processes (photochemical systems; photocatalysis systems, photo-electrolysis systems, bio-photolysis systems, thermolysis systems, thermochemical cycles, steam electrolysis, hybrid processes, and concentrated solar energy systems). A comparison of the different methods for hydrogen production based on PV and WG systems was given in this study. A comparative study of different types of electrolyzers was also presented and discussed. Finally, an economic assessment of green hydrogen production is given. The hydrogen production cost depends on several factors, such as renewable energy sources, electrolysis type, weather conditions, installation cost, and the productivity of hydrogen per day. PV/H₂ and wind/H₂ systems are both suitable in remote and arid areas. Minimum maintenance is required, and a power cycle is not needed to produce electricity. The concentrated CSP/H₂ system needs a power cycle. The hydrogen production cost is higher if using wind/H₂ rather than PV/H₂. The green energy sources are useful for multiple applications, such as hydrogen production, cooling systems, heating, and water desalination.

Bee products, abundant in bioactive ingredients, have been utilized in both traditional and contemporary medicine. Their antioxidant, antimicrobial, and anti-inflammatory properties make them valuable for food, preservation, and cosmetics applications. Honeybees are a vast reservoir of potentially beneficial products such as honey, bee pollen, bee bread, beeswax, bee venom, and royal jelly. These products are rich in metabolites vital to human health, including proteins, amino acids, peptides, enzymes, sugars, vitamins, polyphenols, flavonoids, and minerals. The advancement of nanotechnology has led to a continuous search for new natural sources that can facilitate the easy, low-cost, and eco-friendly synthesis of nanomaterials. Nanoparticles (NPs) are actively synthesized using honeybee products, which serve dual purposes in preventive and interceptive treatment strategies due to their richness in essential metabolites. This review aims to highlight the potential role of bee products in this line and their applications as catalysts and food preservatives and to point out their anticancer, antibacterial, antifungal, and antioxidant underlying impacts. The research used several online databases, namely Google Scholar, Science Direct, and Sci Finder. The overall findings suggest that these bee-derived substances exhibit remarkable properties, making them promising candidates for the economical and eco-friendly production of NPs.

Hazardous dyes in industrial wastewater are an internationally recognized issue for community health. Nanoparticles synthesized through green protocols are a fascinating research field with numerous applications. The current study mainly aimed to investigate the degradation of Congo red (CR) dye under UV light in the presence of H₂O₂ and the photocatalytic activity of copper oxide nanoparticles (CuONPs). For CuONP formation, Citrus maxima extract contains a high number of phytochemical constituents. The size of CuONPs ranges between 25 and 90 nm. The photocatalytic activity of CuONPs with the addition of H₂O₂ was observed and analyzed under UV light to eliminate CR dye. The UV light caused the decomposition of H₂O₂, which produced ·OH radicals. The results revealed a significant increment in dye degradation during the presence of H₂O₂. The effect of concentration on the degradation of the CR dye was also studied. The degradation pathway of organic pollutants was reputable from the hydroxy radical medicated degradation of CR. Advanced Oxidation Treatment depends on the in situ production of reactive ·OH species and is presented as the most effective procedure for decontamination. The biological activity of CuONPs was evaluated against Escherichia coli Bacillus subtillis, Staphylococcus aureus, Shigella flexenari, Acinetobacter Klebsiella pneumonia, Salmonella typhi and Micrococcus luteus. The newly synthesised nanomaterials showed strong inhibition activity against Escherichia coli (45%), Bacillus subtilis (42%) and Acinetobacter species (25%). The activity of CuONPs was also investigated against different fungus species such as: Aspergillus flavus, A. niger, Candida glabrata, T. longifusus, M. Canis, C. glabrata and showed a good inhibition zone against Candida glabrata 75%, Aspergillus flavus 68%, T. longifusus 60%. The materials showed good activity against C. glaberata, A. flavus and T. longifusus. Furthermore, CuONPs were tested for antioxidant properties using 2, 2 diphenyl-1-picrylhydrazyl) (DPPH).

Na-magadiite materials were prepared from a gel containing a silica source, sodium hydroxide, and water via hydrothermal treatment at different temperatures (130 °C to 170 °C) and periods of time (1 day to 10 days). In this study, four silica sources were selected (fumed silica, colloidal silica, Ludox HS-40%, and Ludox AS-40%). Variable conditions such as sodium hydroxide and water contents were explored at a specific temperature and reaction time. The obtained materials were characterized by using X-ray diffraction (XRD), thermogravimetry differential thermal analysis TG-DTA, scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), Fourier Transform Infrared spectroscopy (FTIR), solid ²⁹Si magic angle spinning magnetic nuclear resonance (MAS MNR, and nitrogen adsorption isotherms. A pure Na-magadiite phase was obtained from the four silica sources at a synthesis temperature of 150 °C after a period of one to two days with a characteristic basal spacing of 1.54 nm. At a longer reaction time of 3 days and a higher temperature of 170 °C, Na-kenyaite with a basal spacing of 2.01 nm was achieved, in addition to a quartz phase. The content of water or sodium hydroxide in the gel affected the nature of the prepared phases. A cauliflower-like morphology was obtained from colloidal silica sources, while a different morphology was achieved using solid fumed silica. The ²⁹Si solid NMR confirmed the presence of Q³ and Q⁴ silicon sites in the Na-magadiite materials. The optimal Na-magadiite materials at 150 °C for 2 days were assessed for their ability to remove Basic Blue-41 dye from artificially contaminated aqueous solution. The Langmuir equation was used to estimate the maximum removal capacity. A maximum removal capacity of 219 mg/g was achieved using Na-magadiite prepared from a Ludox-HS40% silica source, and a maximum removal capacity of 167 mg/g was observed for Na-magadiite prepared from fumed silica. Basic Blue-4’s removal percentage was enhanced at basic pH levels (8 to 10) to a maximum of 95%. These materials could be regenerated for seven cycles of reuse with a reduction of 27 to 40% of the original values. Therefore, Na-magadiite materials are promising and efficient removal agents for the removal of Basic Blue-41 from effluents.

Glauconite (Gl), a naturally occurring clay material, was utilized as an affordable and ecologically friendly adsorbent to explore its capturing capacity towards Congo red (CR) dye from textile industrial waste effluent. To improve adsorption and removal effectiveness, a modification technique utilizing polyaniline (PAN) was investigated. An X-ray diffractometer (XRD), a scanning electron microscope (SEM), and Fourier transformer infrared (FTI-R) were applied as strong familiar characterization techniques for all used adsorbents. The effects of starting concentration, contact duration, adsorbent dose, pH, and temperature on the adsorption process were also studied. The reusability of the adsorbent was studied over four adsorption cycles. The results show that PAN modification of Gl enhances the effectiveness of CR elimination. The clearance efficiency of raw and modified glauconite at 25 °C and pH 7 was 77% and 91%, respectively. The kinetics and isotherms of Congo red dye adsorption were investigated using batch studies to determine the impacts of various experimental conditions. The maximum adsorption capacity of the glauconite/polyaniline (Gl/PAN) nanocomposite rose from 11.9 mg/g for Gl to 14.1 mg/g in accordance with the isotherm analysis, which shows that the Langmuir isotherm properly characterizes the experimental data. The pseudo-second-order model (R² = 0.998) properly expresses the experimental data. The reusability research proved that the adsorbents may be reused effectively. The overall results suggest that the modified Gl by PAN might be used as a low-cost, natural adsorbent for eliminating CR color from textile effluent.