Ryan Anderson

Dr. Ryan Anderson


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 July 2019 in Optics Express
Verified
Journal Article
Open access
PDF file
RARyan Anderson
Ryan Anderson
DCDaniel Cohen
Daniel Cohen
SMShlomo Mehari
Shlomo Mehari
SNShuji Nakamura
Shuji Nakamura
Steve DenBaarsSteve DenBaars
Steve DenBaars
We report observations of lateral mode confinement by a tapering nanoporous-GaN layer in the n-side cladding of a blue-emitting InGaN laser diode grown on the semipolar (202¯1¯) plane of bulk GaN. Little additional confinement occurred in the transverse direction, and the nanoporous layer did not serve as a current aperture. Nanoporous-GaN, with Si-doping of 8x1018 cm−3 and 20% porosity had a bulk resistivity of 3 Ω-cm and a thermal conductivity of 4 W/m-K, in general agreement with data reported on c-plane VCSEL structures. An excess modal loss of 19 cm−1 was found.

3 June 2023 in Photonics
Verified
Journal Article
Open access
PDF file
NPNathan Palmquist
Nathan Palmquist
RARyan Anderson
Ryan Anderson
JKJared A. Kearns
Jared A. Kearns
JBJoonho Back
Joonho Back
ETEmily Trageser
Emily Trageser
SNShuji Nakamura
Shuji Nakamura
We report long-cavity (60.5 λ) GaN-based vertical-cavity surface-emitting lasers with a topside monolithic GaN concave mirror, a buried tunnel junction current aperture, and a bottomside nanoporous GaN distributed Bragg reflector. Under pulsed operation, a VCSEL with a 9 µm aperture had a threshold current density of 6.6 kA/cm2, a differential efficiency of 0.7%, and a maximum output power of 290 µW for a lasing mode at 411 nm and a divergence angle of 8.4°. Under CW operation, the threshold current density increased to 7.3 kA/cm2, the differential efficiency decreased to 0.4%, and a peak output power of 130 µW was reached at a current density of 23 kA/cm2.

14 December 2021 in Crystals
Verified
Journal Article
Open access
PDF file
SGSrinivas Gandrothula
Srinivas Gandrothula
HZHaojun Zhang
Haojun Zhang
PSPavel Shapturenka
Pavel Shapturenka
RARyan Anderson
Ryan Anderson
MWMatthew S. Wong
Matthew S. Wong
Steve DenBaarsSteve DenBaars
Steve DenBaars
Edge-emitting laser diodes (LDs) were fabricated on a reduced dislocation density epitaxial lateral overgrown (ELO) wing of a semipolar {202¯1} GaN substrate, termed an ELO wing LD. Two types of facet feasibility studies were conducted: (1) “handmade” facets, wherein lifted-off ELO wing LDs were cleaved manually, and (2) facets formed on wafers through reactive ion etching (RIE). Pulsed operation electrical and optical measurements confirmed the laser action in the RIE facet LDs with a threshold current of ~19 kAcm−2 and maximum light output power of 20 mW from a single uncoated facet. Handmade facet devices showed spontaneous, LED-like emission, confirming device layers remain intact after mechanical liftoff.