Tat-Hean Gan

Prof. Tat-Hean Gan

Brunel University London, Brunel Innovation Centre, Uxbridge, UK
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2017 in Sensors
Verified
Journal Article
Open access
PDF file
JTJIALIN TANG
JIALIN TANG
SSSlim Soua
Slim Soua
CMCristinel Mares
Cristinel Mares
Tat-Hean GanTat-Hean Gan
Tat-Hean Gan
The identification of particular types of damage in wind turbine blades using acoustic emission (AE) techniques is a significant emerging field. In this work, a 45.7-m turbine blade was subjected to flap-wise fatigue loading for 21 days, during which AE was measured by internally mounted piezoelectric sensors. This paper focuses on using unsupervised pattern recognition methods to characterize different AE activities corresponding to different fracture mechanisms. A sequential feature selection method based on a k-means clustering algorithm is used to achieve a fine classification accuracy. The visualization of clusters in peak frequency−frequency centroid features is used to correlate the clustering results with failure modes. The positions of these clusters in time domain features, average frequency−MARSE, and average frequency−peak amplitude are also presented in this paper (where MARSE represents the Measured Area under Rectified Signal Envelope). The results show that these parameters are representative for the classification of the failure modes.

1 July 2018 in Ultrasonics Sonochemistry
Verified
Journal Article
Open access
HLHabiba Lais
Habiba Lais
PLPremesh Shehan Lowe
Premesh Shehan Lowe
Tat-Hean GanTat-Hean Gan
Tat-Hean Gan
LWLuiz C. Wrobel
Luiz C. Wrobel
Fouling build up is a well-known problem in the offshore industry. Accumulation of fouling occurs in different structures, e.g. offshore pipes, ship hulls, floating production platforms. The type of fouling that accumulates is dependent on environmental conditions surrounding the structure itself. Current methods deployed for fouling removal span across hydraulic, chemical and manual, all sharing the common disadvantage of necessitating halting production for the cleaning process to commence. Conventionally, ultrasound is used in ultrasonic baths to clean a submerged component by the generation and implosion of cavitation bubbles on the fouled surface; this method is particularly used in Reverse Osmosis applications. However, this requires the submersion of the fouled structure and thus may require a halt to production. Large fouled structures such as pipelines may not be accommodated. The application of high power ultrasonics is proposed in this work as a means to remove fouling on a structure whilst in operation. The work presented in this paper consists of the development of a finite element analysis model based on successful cleaning results from a pipe fouled with calcite on the inner pipe wall. A Polytec 3D Laser Doppler Vibrometer was used in this investigation to study the fouling removal process. Results show the potential of high power ultrasonics for fouling removal in pipe structures from the wave propagation across the structure under excitation, and are used to validate a COMSOL model to determine cleaning patterns based on pressure and displacement distributions for future transducer array design and optimization.

22 April 2016 in Sensors
Verified
Journal Article
Open access
PDF file
MKMaria Kogia
Maria Kogia
Tat-Hean GanTat-Hean Gan
Tat-Hean Gan
WBWamadeva Balachandran
Wamadeva Balachandran
MLMakis Livadas
Makis Livadas
Vassilios KappatosVassilios Kappatos
Vassilios Kappatos
ARAndrew Round
Andrew Round
Guided Wave Testing (GWT) using novel Electromagnetic Acoustic Transducers (EMATs) is proposed for the inspection of large structures operating at high temperatures. To date, high temperature EMATs have been developed only for thickness measurements and they are not suitable for GWT. A pair of water-cooled EMATs capable of exciting and receiving Shear Horizontal (SH0) waves for GWT with optimal high temperature properties (up to 500 °C) has been developed. Thermal and Computational Fluid Dynamic (CFD) simulations of the EMAT design have been performed and experimentally validated. The optimal thermal EMAT design, material selection and operating conditions were calculated. The EMAT was successfully tested regarding its thermal and GWT performance from ambient temperature to 500 °C.

19 January 2022 in Sensors
Verified
Journal Article
Open access
PDF file
Mohsen ForouzanmehrMohsen Forouzanmehr
Mohsen Forouzanmehr
Kazem Reza KashyzadehKazem Reza Kashyzadeh
Kazem Reza Kashyzadeh
ABAmirhossein Borjali
Amirhossein Borjali
AIAnastas Ivanov
Anastas Ivanov
MJMosayeb Jafarnode
Mosayeb Jafarnode
Mahmoud ChizariMahmoud Chizari
Mahmoud Chizari
Bipolar Plates (BPPs) are the most crucial component of the Polymer Electrolyte Membrane (PEM) fuel cell system. To improve fuel cell stack performance and lifetime, corrosion resistance and Interfacial Contact Resistance (ICR) enhancement are two essential factors for metallic BPPs. One of the most effective methods to achieve this purpose is adding a thin solid film of conductive coating on the surfaces of these plates. In the present study, 410 Stainless Steel (SS) was selected as a metallic bipolar plate. The coating process was performed using titanium nitride and chromium nitride by the Cathodic Arc Evaporation (CAE) method. The main focus of this study was to select the best coating among CrN and TiN on the proposed alloy as a substrate of PEM fuel cells through the comparison technique with simultaneous consideration of corrosion resistance and ICR value. After verifying the TiN and CrN coating compound, the electrochemical assessment was conducted by the potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) tests. The results of PDP show that all coated samples have an increase in the polarization resistance (Rp) values (ranging from 410.2 to 690.6 Ω·cm2) compared to substrate 410 SS (230.1 Ω·cm2). Corrosion rate values for bare 410 SS, CrN, and TiN coatings were measured as 0.096, 0.032, and 0.060 mpy, respectively. Facilities for X-ray Diffraction (XRD), Scanning Electron Microscope (FE-SEM, TeScan-Mira III model and made in the Czech Republic), and Energy Dispersive X-ray Spectroscopy (EDXS) were utilized to perform phase, corrosion behavior, and microstructure analysis. Furthermore, ICR tests were performed on both coated and uncoated specimens. However, the ICR of the coated samples increased slightly compared to uncoated samples. Finally, according to corrosion performance results and ICR values, it can be concluded that the CrN layer is a suitable choice for deposition on 410 SS with the aim of being used in a BPP fuel cell system.

4 September 2019 in Energies
Verified
Journal Article
Open access
PDF file
PQPENG QIAN
PENG QIAN
XTXiange Tian
Xiange Tian
JKJamil Kanfoud
Jamil Kanfoud
JLJoash Lap Yan Lee
Joash Lap Yan Lee
Tat-Hean GanTat-Hean Gan
Tat-Hean Gan
Effective intelligent condition monitoring, as an effective technique to enhance the reliability of wind turbines and implement cost-effective maintenance, has been the object of extensive research and development to improve defect detection from supervisory control and data acquisition (SCADA) data, relying on perspective signal processing and statistical algorithms. The development of sophisticated machine learning now allows improvements in defect detection from historic data. This paper proposes a novel condition monitoring method for wind turbines based on Long Short-Term Memory (LSTM) algorithms. LSTM algorithms have the capability of capturing long-term dependencies hidden within a sequence of measurements, which can be exploited to increase the prediction accuracy. LSTM algorithms are therefore suitable for application in many diverse fields. The residual signal obtained by comparing the predicted values from a prediction model and the actual measurements from SCADA data can be used for condition monitoring. The effectiveness of the proposed method is validated in the case study. The proposed method can increase the economic benefits and reliability of wind farms.

28 November 2017 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Open access
PLPremesh Shehan Lowe
Premesh Shehan Lowe
TSTimo Scholehwar
Timo Scholehwar
JYJimmy Yau
Jimmy Yau
JKJamil Kanfoud
Jamil Kanfoud
Tat-Hean GanTat-Hean Gan
Tat-Hean Gan
CSCem Selcuk
Cem Selcuk
the application of the fundamental shear-horizontal wave mode for guided wave structural health monitoring is undoubtedly beneficial due its non-dispersive characteristics. Existing guided wave shear mode transducers are rigid and brittle, because of these characteristics, bonding them to irregular surfaces (i.e. curved surfaces) are challenging. There is a huge market interest in the development of a flexible shear mode transducer, which eases the transducer bonding process onto irregular surfaces and improves the surface contact between the transducer and the structure. This study presents a flexible shear mode transducer for structural health monitoring using low frequency guided waves (20-120 kHz). The proposed transducer is manufactured using piezoceramic and based on the results in this study, it exhibits the directional excitation of fundamental shear-horizontal mode at 20-120 kHz. Finite element analysis and laboratory experiments were conducted to study the behavior of the proposed transducer. Field trials were conducted on a liquid storage tank with an undulated surface (due to corrosion). The performance of the proposed transducer is also compared to the commercially available Macro Fiber Composite transducers. The proposed transducer was driven by the industrialized ultrasonic guided wave inspection system; Teletest Focus+ in line with the application of tank floor inspection using ultrasonic guided waves.