Li Wang

Li Wang


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 November 2025 in ACS Omega
Verified
Journal Article
Open access
HLHaixiao Lin
Haixiao Lin
WZWenying Zhang
Wenying Zhang
SGShuaifang Guo
Shuaifang Guo
XZxinsheng zhang
xinsheng zhang
LWLi Wang
Li Wang
JZJiyun Zhang
Jiyun Zhang
The damage to coal-rock masses induced by mining disturbance cannot be overlooked, and the damage deformation characteristics under dynamic loading urgently require investigation. Therefore, this study employs Split Hopkinson Pressure Bar (SHPB) impact tests to reveal the energy evolution mechanism and fractal characteristics of coal failure under dynamic loading. Research indicates that coal deformation exhibits significant strain rate dependence, with both dynamic strength and energy consumption parameters increasing linearly with strain rate. Energy evolution drives crack development through four stages: no damage, microcrack initiation, macroscopic nucleation, and collapse, where the energy consumption required for crack formation exceeds that for crack propagation throughout the entire development process. The fractal dimension of fragmented coal satisfies a positive correlation with both strain rate and fragmentation energy density. Coal possesses favorable self-similarity, and under this condition, increased strain rate enhances the coal’s ability to resist impact through elevated elastic energy density, thereby further strengthening dynamic strength. This confirms intensified fragmentation degree and refined fragment particle size under high energy consumption conditions, providing theoretical support for the prevention and control of mine dynamic disasters.

15 July 2022 in ACS Omega
Verified
Journal Article
Open access
XZXinsheng Zhang
Xinsheng Zhang
YCYunxing Cao
Yunxing Cao
LWLi Wang
Li Wang
GXGuo Xiaohui
Guo Xiaohui
Hydraulic fracturing (HF) is an important technique for enhancing the permeability of petroleum and gas reservoirs. To understand the coupling response mechanism of fluid pressure and in situ stress during the expansion of hydraulic fractures-based on the theory of the fluid flow of seepage porous media and damage mechanics-a poromechanical model of hydraulic fracture propagation is proposed and the finite element method (FEM) numerical weak coupling calculation method of hydraulic fracturing is realized. First, the effect of the coupling stress field is described by introducing the β value of the amount of pore volume that varies, resulting from internal pressure per unit of fluid internal, and the coupling calculation method of the pore pressure-effective stress-element damage-pore pressure expansion coefficient is formulated. Second, based on the concept of damage localization, a calculation method for the hydraulic fracture opening equation is proposed, and then the element damage-hydraulic fracture opening-permeability tensor-pore pressure field calculation cycle is established. The model indicates four stages of fracture propagation: I, fracture nucleation, II, kinetic propagation, III, steady propagation, and IV, propagation termination. Finally, as an example, a numerical simulation of three-dimension hydraulic fracturing is performed. In comparison to previous research, the morphology of the fracture zone and the fluid pressure contour of the horizontal section are approximately ellipses, which verify the feasibility of the weak coupling calculation method; the fracture parameters verify its accuracy, which include the length, width, and fluid pressure.

8 January 2024 in ACS Omega
Verified
Journal Article
Open access
BMBingbing Meng
Bingbing Meng
BSBin Shi
Bin Shi
YCYunxing Cao
Yunxing Cao
LWLi Wang
Li Wang
SLShimin Liu
Shimin Liu
N2-hydraulic compound fracturing (NHCF) is an innovative technology aimed at addressing coalbed methane development challenges in low-permeability, low-pressure coal reservoirs in China. However, limited research has been focused on the evolution of damage zones, pore pressure fields, and fluid pressure characteristics in this context. In this paper, we establish a finite element seepage equation based on the volumetric opening model and construct a finite element model for horizontal well stage fracturing. We used the physical and mechanical parameters specific to coal reservoirs in the Xinjing coal mine. Subsequently, we conducted numerical simulations of N2 fracturing (NF), hydraulic fracturing (HF), and NHCF using ANSYS. The results indicate that the initiation-fracturing pressure of NHCF is lower than that of HF but higher than NF, but the steady-fracturing pressure is higher than HF and NF. Moreover, numerical simulation shows that under the same water injection volume, the total volumetric opening formed by NHCF is about 2 times that of HF, NF is the smallest, and the damage zone and pore pressure field caused by NHCF are the largest. Finally, when comparing the casing pressure curve of NHCF by field test with the fluid pressure curve of wellbore obtained from numerical simulation, we observe a strong correlation; the steady fracturing pressure of NF is about 13 MPa, which is basically consistent with the numerical simulation, and the steady- fracturing pressure of HF after NF is about 27 MPa, which is slightly lower than the 30 MPa in numerical simulation. This is because in the numerical simulation, the reservoir parameters after NF can be inherited to the subsequent HF, which cannot be done in the field test. This study presents a novel method for numerical fluid fracturing simulation, offering a fresh perspective on the subject.

17 July 2013 in International Journal of Fracture
Verified
Journal Article
Closed access
PDF file
LWLi Wang
Li Wang
JYJinsheng Ye
Jinsheng Ye
YMYuanchun Mao
Yuanchun Mao
JYJianhui Yang
Jianhui Yang
DRDahu Rui
Dahu Rui

4 December 2023 in Water
Verified
Journal Article
Open access
PDF file
SGShuaifang Guo
Shuaifang Guo
YCYunxing Cao
Yunxing Cao
LWLi Wang
Li Wang
XZxinsheng zhang
xinsheng zhang
WZWenying Zhang
Wenying Zhang
BMBingbing Meng
Bingbing Meng
Confining stress response is considered an accompanying behavior of hydraulic fracturing. Along these lines, an evaluation model of confining stress response was presented in this work. It was established on a rock representative volume element (RVE) and based on the hydraulic volumetric opening model, which stems from the theories of poroelasticity, breakdown damage, and hydraulic fracture mechanics. From the extracted outcomes, it was demonstrated that the confinement of the stress response depends on the matching among the characteristic parameters (εb,εs,m) of the rock breakdown, the volumetric opening, and channel flow regimes of the fracturing fluid. Examples in four limiting fracturing regimes show that (1) the confinement of the stress response is strongly determined by the existence of various fracturing regimes and takes place in a different manner during fracture initiation and opening. More specifically, during fracturing initiation, the ratio of the confining stress response to the far-field stress (Pcmax/σh) is 2.0500 in the M regime, 1.9600 in the M˜ regime, 2.7126 in the K regime, and 1.7448 in the K˜ regime, while when the fracture is opened, these values (PC/σh) are 1.8994, 1.8314, 1.6378, and 1.2846, respectively. (2) The impact of the confined stress response to the fluid pressure is also affected by the fracturing regimes; e.g., in both M and M˜ regimes, the peak confinement stress responses lag behind peak pore pressures, but in the K and K˜ regimes, lag off disappears. (3) The pore volumetric opening (Vpe) leads to an increase in the confining stress response, while the fracture opening (Vpd) leads to a reduction in the confining stress response.

11 September 2024 in Processes
Verified
Journal Article
Open access
PDF file
MWMenglong Wang
Menglong Wang
LTLin Tian
Lin Tian
JWJinghao Wu
Jinghao Wu
YCYunxing Cao
Yunxing Cao
LWLi Wang
Li Wang
YHYunbing Hu
Yunbing Hu
Nitrogen–slick water composite fracturing is a novel, recently developed fracturing technology. Due to its impact on increasing permeability, this technology outperforms hydraulic fracturing. This study adopted the horizontal well XJ-1L, Xinjing coal mine, Qinshui Basin, China, as a study area to statistically analyze the fracture properties, stress drop, and b-value distribution characteristics of 1217 effective micro-seismic events generated during nitrogen–water composite fracturing. The results show that: (1) gradually reducing the proportion of gas in fracturing fluid reduced the proportion of tensile fractures at a ratio of between 15.6% and 0.8%, whereas the proportion of strike-slip fractures gradually increased by between 1.6% and 15.2%; (2) the stress drop and b-values in the nitrogen fracturing (NF) stage, representative of stress disturbance, exceeded those in the hydraulic fracturing (HF) stage, consistent with greater numbers of tensile fractures formed in the NF stage; (3) the greater number of tensile fractures and their increasing permeability could be explained based on the influences of gas compressibility and pore pressure on coal fractures. This study provides a theoretical and practical basis for optimizing the exploitation of low-permeability coal reservoirs.