Bin Shi

Dr. Bin Shi


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 April 2024 in ACS Omega
Verified
Journal Article
Open access
XCXinyi Chen
Xinyi Chen
BSBin Shi
Bin Shi
YCYunxing Cao
Yunxing Cao
PLPiao Long
Piao Long
YQYufei Qi
Yufei Qi
LLLiuyang Li
Liuyang Li
In the process of coalbed methane extraction, due to the strong hydrophilicity of coal, the surface interaction force between water and the coal matrix is strong. The hydrophobic effect of the coal seam during drainage and pressure reduction is not significant, and adsorbed methane is difficult to desorb. In order to reduce the surface interaction force promoting methane desorption between water and coal, the surfactants NH766, G526, and D001 with a concentration of 0.1% were selected. A pressure of 12 MPa, which is close to that used for the on-site mining of coalbed methane in Baode, was selected as the experimental condition to simulate hydraulic fracturing of high fat coal, and the influence of different surfactants on methane desorption characteristics was analyzed. Combining contact angle experiments and infrared spectroscopy experiments, we explored the changes in wettability of the coal samples. We compared the changes in wettability and methane desorption characteristics and explored the similarities between these changes. The experimental results showed that after NH766 treatment, the content of oxygen-containing functional groups in coal rock decreased by 30%, and the contact angle of the coal matrix surface increased by 10 degrees. Furthermore, its hydrophobicity was enhanced, and the desorption amount increased by 24%. In contrast, the oxygen-containing functional groups in coal rock after G526 and D001 treatments increased by 5% and 16%, respectively, and the contact angle of the coal matrix surface became smaller. Furthermore, its hydrophilicity was enhanced, and the desorption amount was reduced by 12.5% and 20%, respectively. NH766 reduces wettability and promotes methane desorption, and it can be applied to improve CBM extraction efficiency. G526 and D001 enhance wettability and inhibit methane desorption, which make them suitable for dust prevention and gas control in coal mines.

21 July 2024 in Energy & Fuels
Verified
Journal Article
Closed access
YQYufei Qi
Yufei Qi
LTLin Tian
Lin Tian
YCYunxing Cao
Yunxing Cao
BSBin Shi
Bin Shi
PLPiao Long
Piao Long

22 January 2025 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
DZDan Zhou
Dan Zhou
ZLZhiqiang Lv
Zhiqiang Lv
YCYunxing Cao
Yunxing Cao
Gaofeng LiuGaofeng Liu
Gaofeng Liu
XZxinsheng zhang
xinsheng zhang
SLShimin Liu
Shimin Liu
The pore structure and connectivity of coal are the primary factors influencing the permeability of coal reservoirs. However, clay and carbonate minerals are commonly found filling the pores and fractures within coal. To address the impact of these minerals on fracturing effectiveness, acidic fracturing technology has been introduced. This technique has proven to be an effective measure for enhancing the extraction rate of low-permeability coal seams with high mineral content. In this study, coal samples were treated with a 3% HCl solution, and the changes in the pore structure of the coal before and after acidification were analyzed through low-temperature nitrogen adsorption and X-ray diffraction (XRD) testing. The results were as follows: After acidification, the specific surface area, total pore volume, pore volume in different stages, and average pore size of the coal samples all significantly increased. Specifically, the BET specific surface area grew by an average of 4.8 times and the total pore volume expanded by an average of 7.7 times, with the pore volumes in the pore size ranges of <10 nm and 10–60 nm increasing by an average of 10.1 times and 7.7 times. The smoothness of the pore surface and connectivity of the pore structure in the coal samples improved, as indicated by decreased fractal dimensions D1 (reflecting pore surface roughness) and D2 (representing pore size distribution uniformity). The acidification mechanism was mainly attributed to the dissolution of carbonate minerals in the coal, which led to the removal of obstructive minerals such as ankerite and calcite that had accumulated in the coal pores. This resulted in the formation of new micropores and microfractures, achieving pore volume enhancement and pore expansion.

17 February 2022 in Energy & Fuels
Verified
Journal Article
Closed access
BSBin Shi
Bin Shi
YCYunxing Cao
Yunxing Cao
LTLin Tian
Lin Tian
JZJunsheng Zhang
Junsheng Zhang
SLShimin Liu
Shimin Liu

15 April 2024 in Energy & Fuels
Verified
Journal Article
Closed access
BSBin Shi
Bin Shi
YCYunxing Cao
Yunxing Cao
ZLZhenhua Li
Zhenhua Li
SLShimin Liu
Shimin Liu
YQYufei Qi
Yufei Qi

8 January 2024 in ACS Omega
Verified
Journal Article
Open access
BMBingbing Meng
Bingbing Meng
BSBin Shi
Bin Shi
YCYunxing Cao
Yunxing Cao
LWLi Wang
Li Wang
SLShimin Liu
Shimin Liu
N2-hydraulic compound fracturing (NHCF) is an innovative technology aimed at addressing coalbed methane development challenges in low-permeability, low-pressure coal reservoirs in China. However, limited research has been focused on the evolution of damage zones, pore pressure fields, and fluid pressure characteristics in this context. In this paper, we establish a finite element seepage equation based on the volumetric opening model and construct a finite element model for horizontal well stage fracturing. We used the physical and mechanical parameters specific to coal reservoirs in the Xinjing coal mine. Subsequently, we conducted numerical simulations of N2 fracturing (NF), hydraulic fracturing (HF), and NHCF using ANSYS. The results indicate that the initiation-fracturing pressure of NHCF is lower than that of HF but higher than NF, but the steady-fracturing pressure is higher than HF and NF. Moreover, numerical simulation shows that under the same water injection volume, the total volumetric opening formed by NHCF is about 2 times that of HF, NF is the smallest, and the damage zone and pore pressure field caused by NHCF are the largest. Finally, when comparing the casing pressure curve of NHCF by field test with the fluid pressure curve of wellbore obtained from numerical simulation, we observe a strong correlation; the steady fracturing pressure of NF is about 13 MPa, which is basically consistent with the numerical simulation, and the steady- fracturing pressure of HF after NF is about 27 MPa, which is slightly lower than the 30 MPa in numerical simulation. This is because in the numerical simulation, the reservoir parameters after NF can be inherited to the subsequent HF, which cannot be done in the field test. This study presents a novel method for numerical fluid fracturing simulation, offering a fresh perspective on the subject.