Artem Babaev

Mr. Artem Babaev

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 March 2022 in Metals
Verified
Journal Article
Open access
PDF file
VPVladimir Promakhov
Vladimir Promakhov
AMAlexey Matveev
Alexey Matveev
Olga Klimova-KorsmikOlga Klimova-Korsmik
Olga Klimova-Korsmik
NSNikita Schulz
Nikita Schulz
VBVladislav Bakhmat
Vladislav Bakhmat
AVAlexander Vorozhtsov
Alexander Vorozhtsov
This research work studies the structural phase parameters and physicomechanical properties of metal-matrix composite materials based on a Ni–TiB2 system obtained by additive manufacturing (specifically, direct laser deposition). The properties of the composites obtained were investigated at high temperatures (up to 1000 °C). The feasibility of the fabrication of a composite nanostructure of alloy with advanced physicomechanical properties was shown. The introduction of reinforcing TiB2 particles into an Inconel 625 matrix was confirmed to increase the microhardness and tensile strength of the material obtained. Apparently, the composite structure of the samples facilitates the realisation of several strengthening mechanisms: (1) a grain boundary mechanism that causes strengthening and dislocation movement; (2) a mechanism based on the grain structure breakdown and Hall–Petch relationship realisation.

5 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
AMAlexey Matveev
Alexey Matveev
VPVladimir Promakhov
Vladimir Promakhov
PNPavel Nikitin
Pavel Nikitin
ABArtem Babaev
Artem Babaev
AVAlexander Vorozhtsov
Alexander Vorozhtsov
In this study, we successfully obtained Al-TiB2 composite materials using self-propagating high-temperature synthesis and preliminary mechanical activation of the initial Al-(Ti + 2B) powder mixture with a high aluminum content (70 wt.%). We investigated the possibility of controlling the structure of synthesis products, in particular, the size and shape of ceramic particles. We examined the effects of the mechanical activation of the initial powder mixture on the structure and particle size of titanium diboride in the synthesis products. We proposed a mechanism of structure formation in the synthesis products obtained by SHS using the method of preliminary mechanical activation of the initial mixture. We found that mechanical activation for 60-180 s led to the formation of isolated TiB2 particles of prolate and irregular shape. The average particle size of TiB2 in the synthesis products was 0.77 (after 60 s of mechanical activation) and 1.5 µm (after 180 s of mechanical activation), respectively. An increase in the duration of mechanical activation to 900 s led to the formation of an island (skeletal) structure, in which there were interconnected aggregates and isolated particles of titanium diboride. The average size of these particles was 4.3 µm.

30 August 2022 in Metals
Verified
Journal Article
Open access
PDF file
ABArtem Babaev
Artem Babaev
VPVladimir Promakhov
Vladimir Promakhov
NSNikita Schulz
Nikita Schulz
ASArtem Semenov
Artem Semenov
VBVladislav Bakhmat
Vladislav Bakhmat
AVAlexander Vorozhtsov
Alexander Vorozhtsov
With a vista of available stainless steel grades at our disposal, it is possible to manufacture items for a wide range of industries. These include chemicals production, medicine, and pharmacology, aerospace, power engineering, etc. Stainless steels are widely used mostly due to their unique property set, both mechanical and physicochemical ones, achieved by alloying various components. Stainless steel workpieces are usually obtained by melting, alloying, casting, and subsequent rolling to the desired shape. The experience in the study of the microstructure and processes of physical treatment of steel accumulated to the present day mainly concerns the machinability (blade, abrasive, laser, etc.) of such steels obtained by conventional techniques. Meanwhile, approaches to the production of workpieces from stainless steels by additive manufacturing (AM) methods are actively developing. In their turn, additive manufacturing technologies allow for producing workpieces that are structurally as close as possible to the final product shape. However, the use of AM workpieces in the manufacturing of functional products brings questions related to the study of the treatability of such steels by mechanical and physical processes to achieve a wide range of functional characteristics. This article discusses the issues of treatability and the characteristics and properties of stainless steels obtained by AM.

15 November 2022 in Metals
Verified
Journal Article
Open access
PDF file
AAAlexey Arlyapov
Alexey Arlyapov
SVSergey Volkov
Sergey Volkov
VPVladimir Promakhov
Vladimir Promakhov
AMAlexey Matveev
Alexey Matveev
ABArtem Babaev
Artem Babaev
AZAlexander Zhukov
Alexander Zhukov
This work studies the process feasibility of milling a metal-matrix composite based on Inconel 625 with added NiTi-TiB2 fabricated by direct laser deposition. The composite is intended for manufacturing turbine blades and it has strength characteristics on par with those of Inconel 625. However, the addition of TiB2 has improved its heat and wear resistance. This material is new, and its machinability has not been studied. The new composite was milled with end mill cutters, and recommendations were worked out on the cutting speed, feed per tooth, cutter flank angle, as well as depth and width of milling. The wear of cutter teeth flank was more intense. After the flank wear land on the back surface of a tooth had reached 0.11–0.15 mm, there was a sharp increase in the forces applied which was followed by brittle fracture of the tooth. Milling at a speed of 25 m/min ensured 28 min of stable operation. However, afterwards the critical wear value of 0.11 mm was quickly approached at a cutting speed of 50 m/min, and critical wear followed after 14 min. Dependencies of the cutting forces vs. time for all the selected cutting speeds and throughout the entire testing time period have a tendency to increase, which indicates the influence of cutter wear on the cutting forces. It was found that the durability of the cutters increases with an increase in the milling width and a decrease in the milling depth.

2 October 2022 in Materials
Verified
Journal Article
Open access
PDF file
AMAlexey Matveev
Alexey Matveev
VPVladimir Promakhov
Vladimir Promakhov
NSNikita Schulz
Nikita Schulz
VBVladislav Bakhmat
Vladislav Bakhmat
ABArtem Babaev
Artem Babaev
AVAleksander Vorozhtsov
Aleksander Vorozhtsov
This paper studies the impact of the mass fraction of NiTi–TiB2 particles obtained by the method of self-propagating high-temperature synthesis (SHS) on the phase composition, structure, and mechanical properties of composites made by direct laser deposition from an Inconel 625–NiTiz–TiB2 powder mixture. Composites were obtained from a powder mixture with the mass fraction of particles at 5–10 wt%, and they consisted of an Inconel 625 metal matrix wherein ceramic inclusions of titanium diboride TiB2 were distributed. Increasing the mass fraction of SHS-produced NiTi particles from 30 to 95 wt% led to the emergence of a NiTi intermetallide phase in the matrix material as well as an increase in the average TiB2 particle size and formation of their agglomerates. In addition, an increase in the microhardness of the materials was observed. The graph of tensile strength of Inconel 625–NiTi–TiB2 samples has a parabolic shape with a maximum at 1000 MPa (when the mass fraction of SHS-produced NiTi–TiB2 particles is at 30 wt%). A further increase in the mass fraction of NiTi–TiB2 led to a decrease in the tensile strength down to 400 MPa. Here the deformation of samples decreases linearly as the ratio of composite particles in the initial mixture increases. From a comparative analysis of the results obtained, the optimal mass fraction of composite NiTi–TiB2 particles in the Inconel 625-NiTi–TiB2 powder mixture was found to be 5 wt%.

13 December 2023 in Metals
Verified
Journal Article
Open access
PDF file
VKVictor Kozlov
Victor Kozlov
ABArtem Babaev
Artem Babaev
NSNikita Schulz
Nikita Schulz
ASArtem Semenov
Artem Semenov
ASAnton Shevchuk
Anton Shevchuk
The article presents data about the distribution of contact stresses on the rake surface of the cutter when turning steel (Fe-0.4 C-1Cr), which were obtained by the split cutter method. The article also provides graphs of the effect of the uncut chip thickness a and the rake angle γ on the main parameters of the plots of shear τ and normal σ contact stresses. For this case, The initial data were obtained by longitudinal turning of a steel workpiece with the measurement of the technological components of the cutting force by a three-component Kistler dynamometer, followed by the calculation of the physical components of the cutting force. The rake angle varied widely, from +35 to −10°, and the uncut chip thickness a varied from 0.05 to 0.37 mm. A decrease in the rake angle from +35 to −10° leads to a significant increase in the maximum normal contact stress at the cutting edge σmax: from 400 to 1400 MPa with the uncut chip thickness a = 0.37 mm. In the area of small uncut chip thickness, a (less than 0.1 mm), the paradoxical increase in the magnitude of the greatest normal contact stress with a large positive rake angle (more than +15°) is explained by the indentation (pressing) of the being machined material under the rounded cutting edge of the cutter in the chip formation zone, and their paradoxical decrease with a negative rake angle is due to the presence of a sag (deflection) of the transient surface. According to the magnitude of the reference points obtained on the basis of experimental data, it is possible to plot the contact stresses epures on the rake surface of the cutting tools when machining steel.