Ting Yang

Dr. Ting Yang


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 March 2022 in Coatings
Verified
Journal Article
Open access
PDF file
BYBaohan Yuan
Baohan Yuan
WWWeize WANG
Weize WANG
DYDongdong Ye
Dongdong Ye
ZZZhenghao Zhang
Zhenghao Zhang
HFHuanjie Fang
Huanjie Fang
Shuncong ZhongShuncong Zhong
Shuncong Zhong
Thermal barrier coatings (TBCs) are usually used in high temperature and harsh environment, resulting in thinning or even spalling off. Hence, it is vital to detect the thickness of the TBCs. In this study, a hybrid machine learning model combined with terahertz time-domain spectroscopy technology was designed to predict the thickness of TBCs. The terahertz signals were obtained from the samples prepared in laboratory and actual turbine blade. The principal component analysis (PCA) method was used to decrease the data dimensions. Finally, an extreme learning machine (ELM) was proposed to establish the thickness of TBCs prediction model. Genetic algorithm (GA) was selected to optimize the model to make it more accurate. The results showed that the root correlation coefficient (R2) exceeded 0.97 and the errors (root mean square error and mean absolute percentage error) were less than 2.57. This study proposes that terahertz time-domain technology combined with PCA–GA–ELM model is accurate and feasible for evaluating the thickness of the TBCs.

24 August 2023 in Coatings
Verified
Journal Article
Open access
PDF file
WLWei Liu
Wei Liu
YLYangguang Liu
Yangguang Liu
WWWeize WANG
Weize WANG
TYTing Yang
Ting Yang
WZWenkang Zhang
Wenkang Zhang
STShantung Tu
Shantung Tu
Thermal barrier coatings (TBCs) material has excellent high-temperature resistance and heat insulation performance, which plays a vital role in improving the working efficiency and running life of the engine. During the flight, the engine will inhale dust particles in the air. These particles are mostly from siliceous debris, which are usually called calcium magnesium aluminum silicate (CMAS). At present, CMAS corrosion has become one of the important problems affecting the service life of thermal barrier coatings. In this study, conventional yttrium oxide stabilized zirconia (YSZ) coatings and ytterbium oxide and yttrium oxide co-stabilized zirconia (YbYSZ) coatings were prepared by atmospheric plasma spraying. The two coatings were examined under thermal cycling-CMAS coupling conditions and divided into six life stages. The failure modes, CMAS permeation behavior, crack characteristics and mechanical properties of the two coatings at different life stages were evaluated systematically. The experimental results show that the YbYSZ coating has a longer life than YSZ coating under the thermal cycling and CMAS coupling condition, which increases by about 83% compared with the conventional YSZ coating. In the whole life stage, the porosity of YbYSZ coating is always higher than that of YSZ coating. The phase transition is not the reason for the failure and spalling of the coatings. The crack length of the two coatings showed an increasing trend, but the crack length of the YSZ coating was higher than that of the YbYSZ coating, and the crack density of the two coatings showed a “saddle shape”, which was more obvious for the YSZ coating. The YbYSZ coating shows better mechanical properties under the thermal cycling-CMAS coupling condition with the evolution of life.

30 November 2021 in Coatings
Verified
Journal Article
Open access
PDF file
ZYZining Yang
Zining Yang
WWWeize WANG
Weize WANG
SDShujuan Deng
Shujuan Deng
HFHuanjie Fang
Huanjie Fang
TYTing Yang
Ting Yang
TYTing Yang
Ting Yang
Gadolinium zirconate with excellent high-temperature phase stability and sintering resistance has become a very promising candidate material for a new generation of thermal barrier coatings (TBCs). However, the low fracture toughness of gadolinium zirconate greatly limits its application. In this study, gadolinium zirconate (GZ) and two kinds of toughened gadolinium zirconate (GZ/YSZ prepared by mixed powder of Gd2Zr2O7 and YSZ and GSZC prepared by (Gd0.925Sc0.075)2(Zr0.7Ce0.3)2O7 powder) double-layered TBCs were prepared by atmospheric plasma spraying (APS). The fracture toughness of the GZ/YSZ coating and GSZC coating were 9 times and 3.5 times that of GZ coating, respectively. The results of thermal shock test showed that the three TBCs exhibit different failure mechanisms. During the thermal shock test, cracking occurred at the interfaces between the YSZ layer and the BC or GZ/YSZ layer, while GSZC TBC failed due to premature cracking inside the GSZC layer. The particle erosion rate of the GZ, GZ/YSZ, and GZSC coatings were 1.81, 0.48, and 1.01 mg/g, respectively, indicating that the erosion resistance of coatings is related to their fracture toughness. Furthermore, the superior erosion resistance of the GZ/YSZ and GSZC coatings can be attributed to the conversion of crack propagation path during the erosion test.

22 August 2024 in Journal of the European Ceramic Society
Verified
Journal Article
Closed access
KLKaibin Li
Kaibin Li
WWWeize WANG
Weize WANG
WLWei Liu
Wei Liu
SYShilong Yang
Shilong Yang
YLYangguang Liu
Yangguang Liu
XDXiuxin Du
Xiuxin Du

3 February 2024 in Coatings
Verified
Journal Article
Open access
PDF file
ZTZhongxiang Tang
Zhongxiang Tang
TYTing Yang
Ting Yang
CZChengcheng Zhang
Chengcheng Zhang
WWWeize WANG
Weize WANG
SLShuainan Liu
Shuainan Liu
CLChen Liu
Chen Liu
The development of gas turbine technology has led to an increase in the complexity of the geometric shape of the sprayed workpiece. Consequently, it has become more difficult to maintain the perpendicularity of the spraying angle during the spraying process, thereby impacting the structure and performance of the coating. This study uses the atmospheric plasma spraying method to simultaneously spray two types of powder for the preparation of embedded micro-agglomerated particle (EMAP) coatings. The spraying process is conducted at four different angles, ranging from 90° to 30°, in order to analyze the influence of the spray angle on the particle deposition and coating performance. The experimental results demonstrate that the relative deposition efficiency, hardness, and elastic modulus of the EMAP coatings decreased as the spray angle decreased. The porosity exhibited a reduction when the spraying angle dropped from 90° to 50°, followed by a significant rise at 30°. The greatest relative amount of second phase particles embedded in the coating appeared at a spraying angle of 90°, amounting to 10.8%. The smallest amount was found at a spraying angle of 30°, with a relative quantity of 2.2%. Furthermore, the molten droplets of the first phase matrix powder underwent extension and fragmentation along the angular direction at low angles. At an angle of 90°, the maximum average thermal shock life was 40.6 cycles, with the best stability of thermal shock life. The decrease in the spraying angle resulted in a deterioration in both the thermal shock life and its stability.

31 August 2023 in Coatings
Verified
Journal Article
Open access
PDF file
CLChen Liu
Chen Liu
WWWeize WANG
Weize WANG
TYTing Yang
Ting Yang
YLYangguang Liu
Yangguang Liu
ZTZhongxiang Tang
Zhongxiang Tang
SLShuainan Liu
Shuainan Liu
With the development of the aerospace industry, the close exploration of the Sun has become a human demand. However, close-range exploration means that the detection satellite needs to accept the test of high temperatures above 1400 °C, so a thermal protective coating is a necessary part of the detection satellite to isolate heat and reflected light. Al2O3 coating has the characteristics of high emissivity and low absorptivity, and it is the best choice for thermal protection coating. However, the coating is subjected to thermal cycles, including heating and cooling, as the satellite rotates around the Sun, which could result in a change in the structure and properties of the coating. Therefore, thermal shock experiments were carried out, and the influence of microstructure on the absorption rate of the Al2O3 coating was investigated. In this study, an Al2O3 coating was prepared by atmospheric plasma spraying (APS). The coating was subjected to a thermal shock (TS) test at 1400 °C using a self-made flame shock device, and coating samples under different thermal shock degrees were obtained. A scanning electron microscope (SEM) was used to characterize the coating pores, and the effects of the coating pore size, aspect ratio (A/R) and cracks in the coating on the optical properties of the coating under different thermal shock degrees were analyzed. In order to clarify the influence of coating microstructure changes on the optical properties of the coating under different thermal shock degrees, not only relevant experiments were carried out, but also the solar reflectivity of Al2O3 coatings with different pore structures was analyzed by the finite element method using finite-difference time-domain (FDTD). The results show that increasing the porosity and aspect ratio of the pores can improve the partial solar absorption of the coating. It was also found that the transverse crack propagation improves the solar reflectance of the coating.